Access any wifi network

Solved! WiFi — Denied Access to Network

You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.

tonio5454

Estimable

This is a weird problem that I’ve never seen before. Maybe someone has a solution?

I changed my normal broadband connection to Fibre Broadband yesterday with a new service provider. I’m using a WiFi router D-Link DIR-816 and I was able to connect to the WiFi network without any issues. There are more than 5 members in my family and we all could connect to that network using our laptops, desktops and mobile phones.

But, from one mobile, for some reason I was not able to connect at all and it keeps throwing me a «Denied Access to Network» error. The phone model is Honor 5c. But, the same phone will connect to other WiFi networks but not to this new connection.

So, what could be the problem? Is it the phone or the router? Confused, please help!

webworkings

1. Try and restart the phone. Sometimes, it is that simple.

2. Update the firmware and any apps that need updating on the phone.

3. If the problem persists, check your time and date on the phone to make sure it is correct.

4. Should none of the former work:
a. Clear out the WiFi data on the phone.
b. Reboot the modem/router.
c. Once the modem/router is fully ‘up’ again, reboot the phone and re-input the WiFi data.

5. Now, if you are still having the problem at this point, and you are sure it isn’t the modem/router that is the problem, you may wish to try a «Hard Reset» of the device. However, I really suggest saving this as a last option (or last before parts repair/replacement).

NOTE: Doing this will clear ALL.

webworkings

Titan

1. Try and restart the phone. Sometimes, it is that simple.

2. Update the firmware and any apps that need updating on the phone.

3. If the problem persists, check your time and date on the phone to make sure it is correct.

4. Should none of the former work:
a. Clear out the WiFi data on the phone.
b. Reboot the modem/router.
c. Once the modem/router is fully ‘up’ again, reboot the phone and re-input the WiFi data.

5. Now, if you are still having the problem at this point, and you are sure it isn’t the modem/router that is the problem, you may wish to try a «Hard Reset» of the device. However, I really suggest saving this as a last option (or last before parts repair/replacement).

NOTE: Doing this will clear ALL the data on your phone, so it is suggested you not choose this option unless you have to, or aren’t worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.

1. Make sure that the phone is actually powered off.

2. Press the «Power» and the «Volume Up» buttons, together, until you see the start-up logo on the screen.

3. Once you can see the logo, release the buttons and allow the device to enter the «System Recovery Mode».

4. Next, use «Volume Down» button to get to the «wipe data/factory reset» option When in recovery mode, the «Volume Up» and «Volume Down» buttons are how ypu can navigate and highlight what option you need.

5. Once you have highlighted the «wipe data/factory reset», press the «Power» button to select that option.

6. On the following screen, repeatedly press the «Volume Down» button until the «Yes — delete all user data» option is what is selected.

7. Then press the «Power» button to hard reset the phone.

Источник

Connect to a Wi-Fi network in Windows

Whether you’re at home, work, or out and about, chances are you’ll find a Wi-Fi network that you can connect to for internet access.

Select the Network, Sound, or Battery icons ( ) on the far right side of the taskbar to open quick settings.

The Disconnected icon appears when you’re not connected.

On the Wi-Fi quick setting, select Manage Wi-Fi connections .

Choose the Wi-Fi network you want, then select Connect.

Type the network password, and then select Next.

Whether you’re at home, work, or out and about, chances are you’ll find a Wi-Fi network that you can connect to for internet access.

1. Select the Network icon on the taskbar. The icon that appears depends on your current connection state. If you don’t see one of the network icons (or a similar one) shown in the following image, select the Up arrow to see if it appears there.
2. Choose the Wi-Fi network you want, then select Connect.
3. Type the network password, and then select Next.
4. Choose Yes or No, depending on the type of network you’re connecting to and if you want your PC to be discoverable by other PCs and devices on the network.

Источник

How To Connect To Wi-Fi networks using CMD ( Command Prompt )

Nowadays internet connectivity is everything. For the Internet, we have Wi-Fi connections that we manage and use through the network settings on Windows 7/8.1/10 computers.

You can also connect, manage, and delete your WiFi networks using the command prompt.

In fact, the command prompt offers many more features than the standard network connection settings in Windows 10.

To do this we only require a CMD(Command Prompt) with Administrator privileges and will have to use netsh wlan commands.

How to connect to wifi using cmd with netsh wlan commands-

Before we dive into the guide. You’ll need to open the Command Prompt with administrator rights to perform most of the commands. To do this, use the Windows key + X keyboard shortcut, and select Command Prompt (Admin).

Or search cmd and right click run as administrator

1# View various wireless network profiles saved on your PC

Command > Netsh WLAN show profiles

Every time you connect to a wireless access point, the operating system creates a “wireless network profile”, and it’s stored on your computer, you can view all these profiles using the following command line on the Command Prompt Netsh WLAN show profiles.

Alternatively, you can use the “interface” parameter to show the list of profiles for a particular wireless adapter:

Netsh WLAN show profiles interface=”your WiFi interface name”

2# View WiFi adapter driver information

Command > Netsh WLAN show drivers

When you need to get driver information about your computer’s wireless adapter, you can use the the above command. The result will show the exact drivers being used, the WiFi radios on your PC/laptop alongwith driver version number.

You can further use this command to check your WiFi capabilities. Type in the following command

C:\Netsh WLAN show wirelesscapabilities

The results will show you exactly what your WiFi connection is capable of including WiFi Direct service capabilities.

3# View wireless adapter settings

Command > Netsh WLAN show interfaces

You can see the details of your WiFi interfaces using above command. The results will show you description of the interface, SSID, BSSID, Cipher, authentication type, channel, average receive and transmit rate and radio type.

If you have multiple WiFi connections saved on your PC, the “Show interfaces” command will display the information for all the wireless adapters on your computer. If you only need to see the information for one adapter, you can use the following command:

Netsh WLAN show interface name=”your wifi connection name”

4# Recover your WiFi password from any of the WiFi connection profiles saved on your PC

Command > Netsh WLAN show profile name=”your WiFi connection name” key=clear

If you lost and cannot remember your network security key to connect another device to a particular Wi-Fi access point, you can use the above command to view your WiFi password. You can also use this command to see the data limits if you have set them.

5# Connecting to a WiFi network using command prompt

Command > netsh wlan set hostednetwork mode=allow ssid=”your WiFi connection name” key=”your WiFi connection password”

You can use the above command to sign into your WiFi network. The above command is particularly useful if your WiFi settings in Windows 10 is not visible/cannot be connected due to some reasons. The additional commands are C:\netsh wlan start hostednet and C:\netsh wlan stop hostednetwork These two commands will start and stop your WiFi hotspot connection.

6# Stop your PC connecting automatically to a wireless network out of range

Command > Netsh WLAN set profileparameter name=”your WiFi connection name” connectionmode=manual

Normally, you would have configured your Windows 10 PC to connect to different WiFi networks automatically. While this is the best way to connect, sometimes notice that your laptop connects automatically to a WiFi connection that has zero or poor connectivity instead of an available full network WiFi connection. In such a case you can use the above command to prevent your computer from connecting to different networks automatically. If you want to move again to the automatic mode use the following command C:\Netsh WLAN set profileparameter name=” your WiFi connection name” connectionmode=auto

7# Delete wireless network profile stored on your PC

Command > Netsh WLAN delete profile name=”the WiFi connection you want to delete”

When you no longer need to connect to a particular wireless network, the access point is no longer available, or you need to reset the network profile settings, you can also use Netsh WLAN to delete any profile stored on your computer using the above command. If you can’t remember the name of the network profile, you can use the C:\Netsh WLAN show profiles command to list all the available profiles and select the one you want to delete.

8# Export and import wireless network profiles

Command > Netsh WLAN export profile key=clear folder=”the folder you want to save this report”

Sometimes you need to export and import wireless profiles. The above command exports all your wireless network profiles available on your PC. If you want to export a specific WiFi connection profile to a specific location, use this command > C:\Netsh WLAN export profile name=”your WiFi connection name” key=clear folder=”the folder you want to save this report”

9# Generate a complete report of the wireless adapters on your PC/laptop

Command > Netsh WLAN show WLANreport

Trouble shooting WiFi connection problems is very difficult as Internet has lots of conflicting tutorials and troubleshooting guide. Also you should know the exact problem you are facing while connecting to WiFi.

Using the above command will generate a full detailed WiFi networks report to the following location > C:\ProgramData\Microsoft\Windows\WLANReport\ WLAN-report-latest.html.

Once the WLAN report has been created, copy and paste the path into your web browser’s address bar to open the report.

You can use this report to troubleshoot the problems, ask help on tech forums. The WLAN reports contain a graph with details of the connectivity status, including information, such as when the connection started, when it got disconnected, errors, and more.

The report also summarizes network adapters information configured on your system, session success/failures, disconnect reasons, and a lot more. It’s a very detailed report that can help you to ping point many Wi-Fi connectivity issues.

So this was how to connect to wifi using cmd (command prompt) with netsh wlan commands

Источник