Access denied unknown user роутер

Solved! WiFi — Denied Access to Network

You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.

tonio5454

Estimable

This is a weird problem that I’ve never seen before. Maybe someone has a solution?

I changed my normal broadband connection to Fibre Broadband yesterday with a new service provider. I’m using a WiFi router D-Link DIR-816 and I was able to connect to the WiFi network without any issues. There are more than 5 members in my family and we all could connect to that network using our laptops, desktops and mobile phones.

But, from one mobile, for some reason I was not able to connect at all and it keeps throwing me a «Denied Access to Network» error. The phone model is Honor 5c. But, the same phone will connect to other WiFi networks but not to this new connection.

So, what could be the problem? Is it the phone or the router? Confused, please help!

webworkings

1. Try and restart the phone. Sometimes, it is that simple.

2. Update the firmware and any apps that need updating on the phone.

3. If the problem persists, check your time and date on the phone to make sure it is correct.

4. Should none of the former work:
a. Clear out the WiFi data on the phone.
b. Reboot the modem/router.
c. Once the modem/router is fully ‘up’ again, reboot the phone and re-input the WiFi data.

5. Now, if you are still having the problem at this point, and you are sure it isn’t the modem/router that is the problem, you may wish to try a «Hard Reset» of the device. However, I really suggest saving this as a last option (or last before parts repair/replacement).

NOTE: Doing this will clear ALL.

webworkings

Titan

1. Try and restart the phone. Sometimes, it is that simple.

2. Update the firmware and any apps that need updating on the phone.

3. If the problem persists, check your time and date on the phone to make sure it is correct.

4. Should none of the former work:
a. Clear out the WiFi data on the phone.
b. Reboot the modem/router.
c. Once the modem/router is fully ‘up’ again, reboot the phone and re-input the WiFi data.

5. Now, if you are still having the problem at this point, and you are sure it isn’t the modem/router that is the problem, you may wish to try a «Hard Reset» of the device. However, I really suggest saving this as a last option (or last before parts repair/replacement).

NOTE: Doing this will clear ALL the data on your phone, so it is suggested you not choose this option unless you have to, or aren’t worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.

1. Make sure that the phone is actually powered off.

2. Press the «Power» and the «Volume Up» buttons, together, until you see the start-up logo on the screen.

3. Once you can see the logo, release the buttons and allow the device to enter the «System Recovery Mode».

4. Next, use «Volume Down» button to get to the «wipe data/factory reset» option When in recovery mode, the «Volume Up» and «Volume Down» buttons are how ypu can navigate and highlight what option you need.

5. Once you have highlighted the «wipe data/factory reset», press the «Power» button to select that option.

6. On the following screen, repeatedly press the «Volume Down» button until the «Yes — delete all user data» option is what is selected.

7. Then press the «Power» button to hard reset the phone.

Источник

MySQL 5.7.17 startup log showing [Note] Access denied for user ‘UNKNOWN_MYSQL_USER’

I have MySQL Community Server version 5.7.17 running on Centos 6, everything comes with clean install, Centos 6 installed with «minimal» options, MySQL installed by official yum repo. When I start MySQL server, the log «/var/log/mysqld.log» showing:

[Note] Access denied for user 'UNKNOWN_MYSQL_USER'@'localhost' (using password: NO) 

mysql> select * from mysql.user; 

I can only see «root» and «mysql.sys» which comes by default, may I know what is the user ‘UNKNOWN_MYSQL_USER’@’localhost’? is that something new in the version 5.7.17? Thanks.

2 Answers 2

Nothing to worry about 🙂 You are receiving this message because someone/something tried to access MySQL server, but connection failed. You can reproduce this behaviour by attempting to connect to MySQL with wrong user and/or password and watch the error log file.

In your case, looks like it’s the /etc/init.d/mysqld itself trying to test if MySQL server is up and running.

TIMEOUT="$STARTTIMEOUT" while [ $TIMEOUT -gt 0 ]; do RESPONSE=`/usr/bin/mysqladmin --socket="$socketfile" --user=UNKNOWN_MYSQL_USER ping 2>&1` 

By default, in MySQL 5.7 the error log verbosity is set to 3 (errors, warnings and notes), this is why you’re seeing this message in the error log file.

mysql> show variables like 'log_error_verbosity'; +---------------------+-------+ | Variable_name | Value | +---------------------+-------+ | log_error_verbosity | 3 | +---------------------+-------+ 

Источник

Сообщество –

это группа ЧКФР, объединенных общими интересами (не глобального, а локального характера), которым необходима отдельная площадка для их обсуждения.
Создать сообщество может любой ЧКФР, состоящий в клубе не менее полугода.
Любой ЧКФР может вступить в любое сообщество или в несколько сообществ одновременно. Членство в сообществе позволяет участвовать в обсуждении тем сообщества.

Как создать сообщество?

Отправить заявку в виде личного сообщения Модератору.
В заявке должно быть указано: название будущего сообщества, основные темы обсуждений, возможное количество участников.

Как вступить в сообщество?

Чтобы вступить в уже существующее сообщество, нужно зайти в это сообщество и нажать кнопку «Вступить в сообщество».
Вступление в сообщество происходит автоматически без одобрения кандидатуры вступающего другими членами сообщества.

p.s. рутер был успешно подключен, драйвера проинсталированны. Собственно сеть работает и Wifi сигнал мобила ловит . НО когда пытаешься с мобилы открыть любую страничку сети выдает следующее: ERROR
Access Denied

В чем может быть загвоздка?!

p.s. проверял на компе со статическим IP адресом, все работаем

Вы когда роутер бабахали пароли задавали?
Ну, обычно выход через ИЕ 192.168.1.1 — стандарт, чтоп не ошибиться. (через веревку) Там в настройках лучше ничего не изобретать — вряд ли Ваши соседи будут жрать Ваш трафик — завсегда можно будет заявиться к ним с лопатами и вилами — МакАфе примитивный запросто показывает всех ублюдкоФ, кто к Вам подключился. Ну и тд

да, пароль установлен (версия WPA2-PSK)

p.s. вход,действительно через 192.168.1.1 но у меня 192.168.2.1 т.k. интернет на компе не работал

ну я пробовал на компе со статическим адресом все пошло без лишных заморочек

не совсем понял что вы имели ввиду p.s. сетевой кабель втыкал в разъем WAN рутера а из рутера (другим кабелем) уже в сам комп

1. Имя сети (SSID): любое понравившееся название. У меня, к примеру, — Nemesida.Net. При незапрете транслируется по вайфай.
2. Ваш LOGIN & PASSWORD для авторизации в сети провайдера. Дает он же.
3. Тип соединения с инетом (чаще PPPoE или PPTP): узнать у провайдера.
При PPTP — адрес VPN сервера.
4. DHCP — включить, гемора меньше.
5. Номер канала передачи (частота): лучше «АВТО», хотя и возможны проблемы с приемниками ваифаи.

6. Режим безопасности: чаще пользуют WPA2-personal. Естейственно пароль для вайфай подключения к вашей сети.
7. Замена стандартного пасворда роутера с «admin» на что-то своё.

Я тычу наугад При включении телефон сеть видит? При попытке подключения , при ошибке, главный комп , с которого настраивался роутер,пишет, что произошла попытка доступа в сеть(ну или в этом роде)?

да, телефон видит Wifi сигнал и при вводе пароля подключается . и главный комп пишет что произошла попытка доступа

Кажись все. Дальше варианты.

Источник

Connection Status: unknown access is denied

My main user profile is having problems showing stats for my network. The Vista network connection icon has a red x in it and states, “Connection status: Unknown» «Access is denied.” on mouse hover, and the Network and Sharing center shows the following. The main profile is local admin and other user profiles work. I have tried resetting permissions on my profile folder.

Verify that your NIC is functioning correctly. Have you tried an updated driver? Are there any errors in your event logs?

The computer is functioning 100% all other user profiles are fine. This user profile is working and does have access to the network. The only thing is the red X on the network tray icon and that I can’t change any settings. I found this KB support.microsoft.com/kb/945925 is doesn’t look good.

This has been tagged techsupport. serverfault isn’t for general troubleshooting of personal workstations

4 Answers 4

• Right click Computer and hit Manage
• Under System Tools, double click Local Users and Groups then click Groups
• Right click Administrators
• Click Add to group then click Add then Advanced
• Click Find Now
• Double click on Local Service then click OK
• NT Authority\Local Service should show up in the list, click OK then Reboot

Looks like a permissions issue. You can try this:

1. Go to the administrator command prompt by clicking Start
2. In the search box type «cmd» (don’t hit enter yet)
3. Press CTRL + Shift + Enter (accept the UAC prompt)
4. At the C:\Windows\system32> prompt type:

net localgroup Administrators "Local Service" /add (use quotes is object contains spaces) 

Sometimes Network Location Awareness service needs to get access by adding permissions to localservice or networkservice.

net localgroup administrators localservice /add net localgroup administrators networkservice /add 

I was having this problem with some accounts after re-installing 64-bit Vista. One account with the problem was «Greg». After trying several solutions from the web, I decided to get creative. So I logged into the Administrator account, created a new account named «GregNew», then went to windows explorer and copied all files under Users\Greg to Users\GregNew. Told it to replace all. Then went back into manage accounts as Administrator and deleted the «Greg» account. All is well now (for now).

You must log in to answer this question.

Related

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

Site design / logo © 2023 Stack Exchange Inc; user contributions licensed under CC BY-SA . rev 2023.7.12.43529

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

Источник