Активировать вай фай через командную строку

How To Connect To Wi-Fi networks using CMD ( Command Prompt )

Nowadays internet connectivity is everything. For the Internet, we have Wi-Fi connections that we manage and use through the network settings on Windows 7/8.1/10 computers.

You can also connect, manage, and delete your WiFi networks using the command prompt.

In fact, the command prompt offers many more features than the standard network connection settings in Windows 10.

To do this we only require a CMD(Command Prompt) with Administrator privileges and will have to use netsh wlan commands.

How to connect to wifi using cmd with netsh wlan commands-

Before we dive into the guide. You’ll need to open the Command Prompt with administrator rights to perform most of the commands. To do this, use the Windows key + X keyboard shortcut, and select Command Prompt (Admin).

Or search cmd and right click run as administrator

1# View various wireless network profiles saved on your PC

Command > Netsh WLAN show profiles

Every time you connect to a wireless access point, the operating system creates a “wireless network profile”, and it’s stored on your computer, you can view all these profiles using the following command line on the Command Prompt Netsh WLAN show profiles.

Alternatively, you can use the “interface” parameter to show the list of profiles for a particular wireless adapter:

Netsh WLAN show profiles interface=”your WiFi interface name”

2# View WiFi adapter driver information

Command > Netsh WLAN show drivers

When you need to get driver information about your computer’s wireless adapter, you can use the the above command. The result will show the exact drivers being used, the WiFi radios on your PC/laptop alongwith driver version number.

Читайте также:  Ac1200 mesh усилитель wi fi сигнала re315

You can further use this command to check your WiFi capabilities. Type in the following command

C:\Netsh WLAN show wirelesscapabilities

The results will show you exactly what your WiFi connection is capable of including WiFi Direct service capabilities.

3# View wireless adapter settings

Command > Netsh WLAN show interfaces

You can see the details of your WiFi interfaces using above command. The results will show you description of the interface, SSID, BSSID, Cipher, authentication type, channel, average receive and transmit rate and radio type.

If you have multiple WiFi connections saved on your PC, the “Show interfaces” command will display the information for all the wireless adapters on your computer. If you only need to see the information for one adapter, you can use the following command:

Netsh WLAN show interface name=”your wifi connection name”

4# Recover your WiFi password from any of the WiFi connection profiles saved on your PC

Command > Netsh WLAN show profile name=”your WiFi connection name” key=clear

If you lost and cannot remember your network security key to connect another device to a particular Wi-Fi access point, you can use the above command to view your WiFi password. You can also use this command to see the data limits if you have set them.

5# Connecting to a WiFi network using command prompt

Command > netsh wlan set hostednetwork mode=allow ssid=”your WiFi connection name” key=”your WiFi connection password”

You can use the above command to sign into your WiFi network. The above command is particularly useful if your WiFi settings in Windows 10 is not visible/cannot be connected due to some reasons. The additional commands are C:\netsh wlan start hostednet and C:\netsh wlan stop hostednetwork These two commands will start and stop your WiFi hotspot connection.

6# Stop your PC connecting automatically to a wireless network out of range

Command > Netsh WLAN set profileparameter name=”your WiFi connection name” connectionmode=manual

Normally, you would have configured your Windows 10 PC to connect to different WiFi networks automatically. While this is the best way to connect, sometimes notice that your laptop connects automatically to a WiFi connection that has zero or poor connectivity instead of an available full network WiFi connection. In such a case you can use the above command to prevent your computer from connecting to different networks automatically. If you want to move again to the automatic mode use the following command C:\Netsh WLAN set profileparameter name=” your WiFi connection name” connectionmode=auto

Читайте также:  Физический адрес wi fi

7# Delete wireless network profile stored on your PC

Command > Netsh WLAN delete profile name=”the WiFi connection you want to delete”

When you no longer need to connect to a particular wireless network, the access point is no longer available, or you need to reset the network profile settings, you can also use Netsh WLAN to delete any profile stored on your computer using the above command. If you can’t remember the name of the network profile, you can use the C:\Netsh WLAN show profiles command to list all the available profiles and select the one you want to delete.

8# Export and import wireless network profiles

Command > Netsh WLAN export profile key=clear folder=”the folder you want to save this report”

Sometimes you need to export and import wireless profiles. The above command exports all your wireless network profiles available on your PC. If you want to export a specific WiFi connection profile to a specific location, use this command > C:\Netsh WLAN export profile name=”your WiFi connection name” key=clear folder=”the folder you want to save this report”

9# Generate a complete report of the wireless adapters on your PC/laptop

Command > Netsh WLAN show WLANreport

Trouble shooting WiFi connection problems is very difficult as Internet has lots of conflicting tutorials and troubleshooting guide. Also you should know the exact problem you are facing while connecting to WiFi.

Using the above command will generate a full detailed WiFi networks report to the following location > C:\ProgramData\Microsoft\Windows\WLANReport\ WLAN-report-latest.html.

Once the WLAN report has been created, copy and paste the path into your web browser’s address bar to open the report.

You can use this report to troubleshoot the problems, ask help on tech forums. The WLAN reports contain a graph with details of the connectivity status, including information, such as when the connection started, when it got disconnected, errors, and more.

Читайте также:  Laserjet m1132 mfp есть ли вай фай

The report also summarizes network adapters information configured on your system, session success/failures, disconnect reasons, and a lot more. It’s a very detailed report that can help you to ping point many Wi-Fi connectivity issues.

So this was how to connect to wifi using cmd (command prompt) with netsh wlan commands

Источник

Командная строка Windows: подключение к беспроводной сети

Мы всегда находимся в поисках гениальных способов произвести впечатление на наших друзей, и недавно мы нашли способ подключиться к нашей беспроводной сети из командной строки, поэтому сегодня мы покажем вам, как это сделать.

Как просматривать и подключаться к беспроводным сетям из командной строки

Для просмотра доступных беспроводных сетей из командной строки требуется только одна команда:

К сожалению, для подключения к сети вам необходим сетевой профиль. Это означает, что вам нужно подключиться к нему хотя бы один раз до этого. Чтобы узнать, какие профили доступны на вашем компьютере, используйте следующую команду:

После того, как вы убедитесь, что у вас есть профиль для сети, к которой вы хотите подключиться, вы можете легко подключиться к ней, используя имя сетевого профиля:

netsh wlan connect name=”w1r3l3$$”

Насколько публикация полезна?

Нажмите на звезду, чтобы оценить!

Средняя оценка / 5. Количество оценок:

Оценок пока нет. Поставьте оценку первым.

Источник

Как включить WIFI с помощью cmd?

7d541e9e89394a42a3b543029ede4e50.PNG

Добрый день,
как с помощью cmd (например netsh) включить переключатель Wi-Fi в windows 10?

Просьба не отвечать, если не протестировали сами на своем пк. Так как уже многое пробовал.
Заранее благордарю.

livevasiliy

Узнаем список доступных интерфейсов сети
netsh wlan show interface
Выводим список Wifi сетей
netsh wlan show networks
Для подключения к WiFi сети служит команда
netsh wlan connect name=ИмяПрофиляСети

Можно указать конкретный интерфейс, при помощи которого выполнять подключение. Синтаксис таков: netsh wlan connect name=ИмяПрофиляСети interface=ИмяИнтерфейса
У меня бы это выглядело так:
netsh wlan connect name=TRENDnet interface=»Wireless Network Connection 3″

Отключение от WiFi сети Чтобы отключиться от WiFi сети, необходимо выполнить следующую команду
netsh wlan disconnect
Или указать конкретный интерфейс
netsh wlan disconnect interface=ИмяИнтерфейса
При помощи netsh можно просмотреть все доступные профили:
netsh wlan show profile
И, собственно, подключиться к сети с выбранным профилем:
netsh wlan connect ssid=ИмяСети name=ИмяПрофиляСети

Источник

Оцените статью
Adblock
detector