Programmatically connect to paired Bluetooth device
Is there a way, using the Android SDK, to programmatically connect to an already-paired Bluetooth device? In other words: I can go into Settings -> Wireless & networks -> Bluetooth settings, and tap the device (listed as «Paired but not connected»), at which point it will connect. I’d like to be able to do this programmatically, but don’t see a way to do this. I see the options to create an RFCOMM socket, and for a SPP device, I’m assuming that’ll do the connection part as well, but for an A2DP device, where the actual data transfer will be handled by the OS rather than by my app, I think that’s not applicable?
4 Answers 4
Okay, since this was driving me crazy, I did some digging into the source code and I’ve found a 100% reliable (at least on my Nexus 4, Android 4.3) solution to connect to a paired A2DP device (such as a headset or Bluetooth audio device). I’ve published a fully working sample project (easily built with Android Studio) that you can find here on Github.
Essentially, what you need to do is:
- Get an instance of the BluetoothAdapter
- Using this instance, get a profile proxy for A2DP:
adapter.getProfileProxy (context, listener, BluetoothProfile.A2DP);
where listener is a ServiceListener that will receive a BluetoothProfile in its onServiceConnected() callback (which can be cast to a BluetoothA2dp instance)
Method connect = BluetoothA2dp.class.getDeclaredMethod(«connect», BluetoothDevice.class);
String deviceName = "My_Device_Name"; BluetoothDevice result = null; Set devices = adapter.getBondedDevices(); if (devices != null) < for (BluetoothDevice device : devices) < if (deviceName.equals(device.getName())) < result = device; break; >> > Which, at least for me, caused an immediate connection of the device.
Connect Bluetooth devices
To create a connection between two devices, you must implement both the server-side and client-side mechanisms because one device must open a server socket, and the other one must initiate the connection using the server device’s MAC address. The server device and the client device each obtain the required BluetoothSocket in different ways. The server receives socket information when an incoming connection is accepted. The client provides socket information when it opens an RFCOMM channel to the server.
The server and client are considered connected to each other when they each have a connected BluetoothSocket on the same RFCOMM channel. At this point, each device can obtain input and output streams, and data transfer can begin, which is discussed in the section about transferring Bluetooth data. This section describes how to initiate the connection between two devices.
Make sure you have the appropriate Bluetooth permissions and set up your app for Bluetooth before attempting to find Bluetooth devices.
Connection techniques
One implementation technique is to automatically prepare each device as a server so that each device has a server socket open and listening for connections. In this case, either device can initiate a connection with the other and become the client. Alternatively, one device can explicitly host the connection and open a server socket on demand, and the other device initiates the connection.
Figure 1. The Bluetooth pairing dialog.
Note: If the two devices have not been previously paired, then the Android framework automatically shows a pairing request notification or dialog to the user during the connection procedure, as shown in figure 1. Therefore, when your app attempts to connect devices, it doesn’t need to be concerned about whether or not the devices are paired. Your RFCOMM connection attempt gets blocked until the user has successfully paired the two devices, and the attempt fails if the user rejects pairing, or if the pairing process fails or times out.
Connect as a server
When you want to connect two devices, one must act as a server by holding an open BluetoothServerSocket . The purpose of the server socket is to listen for incoming connection requests and provide a connected BluetoothSocket after a request is accepted. When the BluetoothSocket is acquired from the BluetoothServerSocket , the BluetoothServerSocket can—and should—be discarded, unless you want the device to accept more connections.
To set up a server socket and accept a connection, complete the following sequence of steps:
- Get a BluetoothServerSocket by calling listenUsingRfcommWithServiceRecord(String, UUID) . The string is an identifiable name of your service, which the system automatically writes to a new Service Discovery Protocol (SDP) database entry on the device. The name is arbitrary and can simply be your app name. The Universally Unique Identifier (UUID) is also included in the SDP entry and forms the basis for the connection agreement with the client device. That is, when the client attempts to connect with this device, it carries a UUID that uniquely identifies the service with which it wants to connect. These UUIDs must match in order for the connection to be accepted. A UUID is a standardized 128-bit format for a string ID used to uniquely identify information. A UUID is used to identify information that needs to be unique within a system or a network because the probability of a UUID being repeated is effectively zero. It is generated independently, without the use of a centralized authority. In this case, it’s used to uniquely identify your app’s Bluetooth service. To get a UUID to use with your app, you can use one of the many random UUID generators on the web, then initialize a UUID with fromString(String) .
- Start listening for connection requests by calling accept() . This is a blocking call. It returns when either a connection has been accepted or an exception has occurred. A connection is accepted only when a remote device has sent a connection request containing a UUID that matches the one registered with this listening server socket. When successful, accept() returns a connected BluetoothSocket .
- Unless you want to accept additional connections, call close() . This method call releases the server socket and all its resources, but doesn’t close the connected BluetoothSocket that’s been returned by accept() . Unlike TCP/IP, RFCOMM allows only one connected client per channel at a time, so in most cases it makes sense to call close() on the BluetoothServerSocket immediately after accepting a connected socket.
Because the accept() call is a blocking call, do not execute it in the main activity UI thread. Executing it in another thread ensures that your app can still respond to other user interactions. It usually makes sense to do all work that involves a BluetoothServerSocket or BluetoothSocket in a new thread managed by your app. To abort a blocked call such as accept() , call close() on the BluetoothServerSocket or BluetoothSocket from another thread. Note that all methods on a BluetoothServerSocket or BluetoothSocket are thread-safe.
Example
The following is a simplified thread for the server component that accepts incoming connections:
Kotlin
private inner class AcceptThread : Thread() < private val mmServerSocket: BluetoothServerSocket? by lazy(LazyThreadSafetyMode.NONE) < bluetoothAdapter?.listenUsingInsecureRfcommWithServiceRecord(NAME, MY_UUID) >override fun run() < // Keep listening until exception occurs or a socket is returned. var shouldLoop = true while (shouldLoop) < val socket: BluetoothSocket? = try < mmServerSocket?.accept() >catch (e: IOException) < Log.e(TAG, "Socket's accept() method failed", e) shouldLoop = false null >socket?.also < manageMyConnectedSocket(it) mmServerSocket?.close() shouldLoop = false >> > // Closes the connect socket and causes the thread to finish. fun cancel() < try < mmServerSocket?.close() >catch (e: IOException) < Log.e(TAG, "Could not close the connect socket", e) >> >
Java
private class AcceptThread extends Thread < private final BluetoothServerSocket mmServerSocket; public AcceptThread() < // Use a temporary object that is later assigned to mmServerSocket // because mmServerSocket is final. BluetoothServerSocket tmp = null; try < // MY_UUID is the app's UUID string, also used by the client code. tmp = bluetoothAdapter.listenUsingRfcommWithServiceRecord(NAME, MY_UUID); >catch (IOException e) < Log.e(TAG, "Socket's listen() method failed", e); >mmServerSocket = tmp; > public void run() < BluetoothSocket socket = null; // Keep listening until exception occurs or a socket is returned. while (true) < try < socket = mmServerSocket.accept(); >catch (IOException e) < Log.e(TAG, "Socket's accept() method failed", e); break; >if (socket != null) < // A connection was accepted. Perform work associated with // the connection in a separate thread. manageMyConnectedSocket(socket); mmServerSocket.close(); break; >> > // Closes the connect socket and causes the thread to finish. public void cancel() < try < mmServerSocket.close(); >catch (IOException e) < Log.e(TAG, "Could not close the connect socket", e); >> >
In this example, only one incoming connection is desired, so as soon as a connection is accepted and the BluetoothSocket is acquired, the app passes the acquired BluetoothSocket to a separate thread, closes the BluetoothServerSocket , and breaks out of the loop.
Note that when accept() returns the BluetoothSocket , the socket is already connected. Therefore, you shouldn’t call connect() , as you do from the client side.
The app-specific manageMyConnectedSocket() method is designed to initiate the thread for transferring data, which is discussed in the topic about transferring Bluetooth data.
Usually, you should close your BluetoothServerSocket as soon as you are done listening for incoming connections. In this example, close() is called as soon as the BluetoothSocket is acquired. You may also want to provide a public method in your thread that can close the private BluetoothSocket in the event that you need to stop listening on that server socket.
Connect as a client
In order to initiate a connection with a remote device that is accepting connections on an open server socket, you must first obtain a BluetoothDevice object that represents the remote device. To learn how to create a BluetoothDevice , see Find Bluetooth devices. You must then use the BluetoothDevice to acquire a BluetoothSocket and initiate the connection.
The basic procedure is as follows:
- Using the BluetoothDevice , get a BluetoothSocket by calling createRfcommSocketToServiceRecord(UUID) . This method initializes a BluetoothSocket object that allows the client to connect to a BluetoothDevice . The UUID passed here must match the UUID used by the server device when it called listenUsingRfcommWithServiceRecord(String, UUID) to open its BluetoothServerSocket . To use a matching UUID, hard-code the UUID string into your app, and then reference it from both the server and client code.
- Initiate the connection by calling connect() . Note that this method is a blocking call. After a client calls this method, the system performs an SDP lookup to find the remote device with the matching UUID. If the lookup is successful and the remote device accepts the connection, it shares the RFCOMM channel to use during the connection, and the connect() method returns. If the connection fails, or if the connect() method times out (after about 12 seconds), then the method throws an IOException .
Because connect() is a blocking call, you should always perform this connection procedure in a thread that is separate from the main activity (UI) thread.
Example
The following is a basic example of a client thread that initiates a Bluetooth connection:
Kotlin
private inner class ConnectThread(device: BluetoothDevice) : Thread() < private val mmSocket: BluetoothSocket? by lazy(LazyThreadSafetyMode.NONE) < device.createRfcommSocketToServiceRecord(MY_UUID) >public override fun run() < // Cancel discovery because it otherwise slows down the connection. bluetoothAdapter?.cancelDiscovery() mmSocket?.let < socket ->// Connect to the remote device through the socket. This call blocks // until it succeeds or throws an exception. socket.connect() // The connection attempt succeeded. Perform work associated with // the connection in a separate thread. manageMyConnectedSocket(socket) > > // Closes the client socket and causes the thread to finish. fun cancel() < try < mmSocket?.close() >catch (e: IOException) < Log.e(TAG, "Could not close the client socket", e) >> >
Java
private class ConnectThread extends Thread < private final BluetoothSocket mmSocket; private final BluetoothDevice mmDevice; public ConnectThread(BluetoothDevice device) < // Use a temporary object that is later assigned to mmSocket // because mmSocket is final. BluetoothSocket tmp = null; mmDevice = device; try < // Get a BluetoothSocket to connect with the given BluetoothDevice. // MY_UUID is the app's UUID string, also used in the server code. tmp = device.createRfcommSocketToServiceRecord(MY_UUID); >catch (IOException e) < Log.e(TAG, "Socket's create() method failed", e); >mmSocket = tmp; > public void run() < // Cancel discovery because it otherwise slows down the connection. bluetoothAdapter.cancelDiscovery(); try < // Connect to the remote device through the socket. This call blocks // until it succeeds or throws an exception. mmSocket.connect(); >catch (IOException connectException) < // Unable to connect; close the socket and return. try < mmSocket.close(); >catch (IOException closeException) < Log.e(TAG, "Could not close the client socket", closeException); >return; > // The connection attempt succeeded. Perform work associated with // the connection in a separate thread. manageMyConnectedSocket(mmSocket); > // Closes the client socket and causes the thread to finish. public void cancel() < try < mmSocket.close(); >catch (IOException e) < Log.e(TAG, "Could not close the client socket", e); >> >
Notice that in this snippet, cancelDiscovery() is called before the connection attempt occurs. You should always call cancelDiscovery() before connect() , especially because cancelDiscovery() succeeds regardless of whether device discovery is currently in progress. If your app needs to determine whether device discovery is in progress, you can check using isDiscovering() .
The app-specific manageMyConnectedSocket() method is designed to initiate the thread for transferring data, which is discussed in the section about transferring Bluetooth data.
When you’re done with your BluetoothSocket , always call close() . Doing so immediately closes the connected socket and releases all related internal resources.
Content and code samples on this page are subject to the licenses described in the Content License. Java and OpenJDK are trademarks or registered trademarks of Oracle and/or its affiliates.
Last updated 2023-02-01 UTC.