Arch linux нет multilib

It doesn't

I have simply uncommented:

#[multilib]
#SigLevel = PackageOptional
Include = /etc/pacman.d/mirrorlist

and run sudo pacman -Syy, but it doesn't show up syncing..

Источник

how to enable multilib arch linux

multilib. . multilib contains 32-bit software and libraries that can be used to run and build 32-bit applications on 64-bit installs (e.g. wine, steam, etc). With the multilib repository enabled, the 32-bit compatible libraries are located under /usr/lib32/ .

What is Linux Multilib?

Multilib is one of the solutions allowing users to run applications built for various application binary interfaces (ABIs) of the same architecture. The most common use of multilib is to run 32-bit applications on amd64. The multilib systems use separate library directories for non-native ABIs.

How do I add fonts to Arch Linux?

1. For a single user, install fonts to ~/. local/share/fonts/ . .
2. For system-wide (all users) installation, place your fonts under /usr/local/share/fonts/ . You may need to create the directory first; mkdir -p /usr/local/share/fonts .

How do I enable Multilib repository?

1. Enable multilib in the pacman config by uncommenting these two lines in pacman.conf: nano /etc/pacman.conf. .
2. Upgrade your system: sudo pacman -Syyu.
3. Show 32-bit packages in the multilib repository: pacman -Sl | grep -i lib32.

How do I add an arch repository?

1. Step 1: Get "Git Clone URL" Visit AUR: https://aur.archlinux.org/ and search a package: Go to the package page: Get "Git Clone URL": .
2. Step 2: Build The Package And Install It. git clone [the package] , cd [the package] , makepkg -si , and it's done! This is an example of a package called qperf.

Is Arch community repo safe?

Although TUs perform quality control to the uploaded packages, there is in no guarantee that packages in the AUR are well formed or not malicious. In practice the AUR seems to be quite safe but in theory it can do some damage, but only if you are not careful. A smart Arch user, always inspects PKGBUILDs and *.

What is Arch Linux based on?

Arch is largely based on binary packages. Packages target x86-64 microprocessors to assist performance on modern hardware. A ports/ebuild-like system is also provided for automated source compilation, known as the Arch Build System.

How do I update my Arch Linux repository?

1. The Pacman mirror configuration is in /etc/pacman. .
2. Run the following command to edit /etc/pacman.d/mirrorlist file:
3. Type in your password and press .
4. All the mirrors are active by default.

How install Multilib Linux?

1. Run update command to update package repositories and get latest package information.
2. Run the install command with -y flag to quickly install the packages and dependencies. sudo apt-get install -y gcc-multilib.
3. Check the system logs to confirm that there are no related errors.

What does GCC-Multilib do?

gcc-multilib is useful for cross-compiling, that is, compiling a program to run on a different processor architecture. For example, you would need gcc-multilib if you are running on 64-bit Ubuntu and want to compile a program to run on 32-bit Ubuntu (or on ARM etc. you get the idea).

What should I install Arch Linux on?

1. Step 1: Download the Arch Linux ISO. .
2. Step 2: Create a Live USB or Burn Arch Linux ISO to a DVD. .
3. Step 3: Boot up Arch Linux. .
4. Step 4: Set the Keyboard Layout. .
5. Step 5: Check Your Internet Connection. .
6. Step 6: Enable Network Time Protocols (NTP) .
7. Step 7: Partition the Disks. .
8. Step 8: Create Filesystem.

What should I install after Arch Linux?

1. Update your system. .
2. Installing X server, Desktop Environment and Display Manager. .
3. Install an LTS kernel. .
4. Installing Yaourt. .
5. Install GUI Package Manager Pamac. .
6. Installing Codecs and plugins. .
7. Installing productive software. .
8. Customizing the looks of your Arch Linux desktop.

What to do with a fresh arch install?

1. 1) Check for updates.
2. 2) Add New User and assign sudo privilege.
3. 3) Enable Multilib repository.
4. 4) Enable Yaourt Package Tool.
5. 5) Enable packer Package Tool.
6. 6) Install Desktop Environment.
7. 7) Install Web Browsers.
8. 8) Update Latest & Nearest Mirror.

Uninstall

How do you uninstall a program installed with make install?How do I uninstall after install?How do I uninstall compiled programs?What is the differenc.

Wine

How do I get wine on Arch Linux?Is wine safe for Linux?Is my wine 32 or 64 bit?How do I install Wine on Linux?Where is wine installed in Linux?How do .

Rpcs

PS3 Emulator RPCS3 is now available for the Linux platform through AppImage file. RPCS3 is an open-source PlayStation 3 emulator as well as a debugger.

Latest news, practical advice, detailed reviews and guides. We have everything about the Linux operating system

Источник

Arch Linux

I made the changes to /etc/pacman.conf so I can get wine.

When I run sudo pacman -Sl multilib I get the following:

error: repository "multilib" was not found.

I have re-booted the computer, run pacman -Syu, pacman -Sc.

Not sure what else to try.
Regards,
Craig

# # /etc/pacman.conf # # See the pacman.conf(5) manpage for option and repository directives # # GENERAL OPTIONS # [options] # The following paths are commented out with their default values listed. # If you wish to use different paths, uncomment and update the paths. #RootDir = / #DBPath = /var/lib/pacman/ #CacheDir = /var/cache/pacman/pkg/ #LogFile = /var/log/pacman.log #GPGDir = /etc/pacman.d/gnupg/ #HookDir = /etc/pacman.d/hooks/ HoldPkg = pacman glibc #XferCommand = /usr/bin/curl -L -C - -f -o %o %u #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u #CleanMethod = KeepInstalled Architecture = auto #IgnorePkg = #IgnorePkg = #IgnoreGroup = #NoUpgrade = #NoExtract = # Misc options #UseSyslog #Color #NoProgressBar CheckSpace #VerbosePkgLists #ParallelDownloads = 5 # By default, pacman accepts packages signed by keys that its local keyring # trusts (see pacman-key and its man page), as well as unsigned packages. SigLevel = Required DatabaseOptional LocalFileSigLevel = Optional #RemoteFileSigLevel = Required # NOTE: You must run `pacman-key --init` before first using pacman; the local # keyring can then be populated with the keys of all official Arch Linux # packagers with `pacman-key --populate archlinux`. # # REPOSITORIES # - can be defined here or included from another file # - pacman will search repositories in the order defined here # - local/custom mirrors can be added here or in separate files # - repositories listed first will take precedence when packages # have identical names, regardless of version number # - URLs will have $repo replaced by the name of the current repo # - URLs will have $arch replaced by the name of the architecture # # Repository entries are of the format: # [repo-name] # Server = ServerName # Include = IncludePath # # The header [repo-name] is crucial - it must be present and # uncommented to enable the repo. # # The testing repositories are disabled by default. To enable, uncomment the # repo name header and Include lines. You can add preferred servers immediately # after the header, and they will be used before the default mirrors. #[testing] #Include = /etc/pacman.d/mirrorlist [core] Include = /etc/pacman.d/mirrorlist [extra] Include = /etc/pacman.d/mirrorlist #[community-testing] #Include = /etc/pacman.d/mirrorlist [community] Include = /etc/pacman.d/mirrorlist # If you want to run 32 bit applications on your x86_64 system, # enable the multilib repositories as required here. #[multilib-testing] #Include = /etc/pacman.d/mirrorlist #[multilib] Include = /etc/pacman.d/mirrorlist # An example of a custom package repository. See the pacman manpage for # tips on creating your own repositories. #[custom] #SigLevel = Optional TrustAll #Server = file:///home/custompkgs

################################################################################ ################# Arch Linux mirrorlist generated by Reflector ################# ################################################################################ # With: reflector -c Australia -f 12 -l 10 -n 12 --save /etc/pacman.d/mirrorlist # When: 2021-06-26 22:51:14 UTC # From: [url]https://www.archlinux.org/mirrors/status/json/[/url] # Retrieved: 2021-06-26 22:50:48 UTC # Last Check: 2021-06-26 21:47:42 UTC Server = [url]http://syd.mirror.rackspace.com/archlinux/$repo/os/$arch[/url] Server = [url]https://syd.mirror.rackspace.com/archlinux/$repo/os/$arch[/url] Server = [url]https://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arch[/url] Server = [url]http://mirror.internode.on.net/pub/archlinux/$repo/os/$arch[/url] Server = [url]http://ftp.iinet.net.au/pub/archlinux/$repo/os/$arch[/url] Server = rsync://syd.mirror.rackspace.com/archlinux/$repo/os/$arch Server = rsync://ftp.swin.edu.au/archlinux/$repo/os/$arch Server = rsync://mirror.internode.on.net/archlinux/$repo/os/$arch Server = rsync://ftp.iinet.net.au/archlinux/$repo/os/$arch Server = [url]http://ftp.swin.edu.au/archlinux/$repo/os/$arch[/url]

Last edited by CraigAB69 (2021-07-08 22:18:18)

Источник