Archer t2u linux ubuntu

Попытка установить Tp-Link Archer T2U на Ubuntu

Я только что установил Ubuntu, и я хотел бы, чтобы мой Wi-Fi адаптер USB работал. Есть кто-нибудь, кто знает, где я могу найти подходящие драйверы для этого?

 Bus 002 Device 004: ID 148f:761a Ralink Technology, Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 064e:c21c Suyin Corp. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 

4 ответа

Это устройство в настоящее время не работает с Linux.

драйвер USB MediaTek MT7610 является самым близким соответствием для этого устройства, однако с версии 3.0.0.4_20130913 , это непосредственно не поддерживает T2U. Я добавил идентификатор USB T2U к драйверу, который позволил мне находить сети, но не соединяться с любым из них. Это похоже на получение пакетных работ, но отправки или некоторой части сетевых сбоев ассоциации.

, К сожалению, я не имел никакого успеха с ndiswrapper также. Предложенный метод должен получить установленный ndiswrapper, добавить драйвер XP и использование что:

apt-get install ndiswrapper-source ndisgtk dkms autoinstall ndiswrapper ndiswrapper -i Driver\ Files/Windows\ XP\ 64bit/RT2870.inf modprobe ndiswrapper 

Однако и драйвер, предоставленный на CD-ROM и официальные 140 523 загрузки сбои для загрузки с ndiswrapper на 64-разрядной машине:

ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'ExEventObjectType' ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'__chkstk' ndiswrapper (load_sys_files:200): couldn't prepare driver 'rt2870' ndiswrapper (load_wrap_driver:103): couldn't load driver rt2870; check system log for messages from 'loadndisdriver' 

Этот подход мог бы работать на Вас на 32-разрядном Linux, или возможно нет.

Существует теперь драйвер Linux для этого устройства на веб-сайте ССЫЛКИ TP: http://www.tp-link.com/lb/download/Archer-T2U_V1.html#Driver

У меня есть ноутбук HP Pavilion 360. Решение выше с (данным) кодом, работало на меня, также. Сигнал кажется слабым в настоящий момент, но стабильным. Я протестирую его в предстоящие недели:

mkdir ~/src cd ~/src git clone https://github.com/Myria-de/mt7610u_wifi_sta_v3002_dpo_20130916.git cd mt7610u_wifi_sta_v3002_dpo_20130916 make clean make sudo make install 

ПРИМЕЧАНИЕ: Там официальные источники для драйверов — как отмечено некоторым другим ответом здесь — но они (обычно(?)) не компилируют/работают из поля. Кроме того, новейшая версия не работает на меня (Debian 8 со стандартом x64 ядро:
3.16.0-4-amd64 #1 SMP Debian 3.16.39-1 (2016-12-30) x86_64 GNU/Linux
) — что делает (все еще), работа для меня является фиксацией 4606187110b323c272aed504144ee759b31af8ac .

существует более легкое решение, чем попытка использовать источник производителя (взятый от этот (немецкий) сайт ):

Просто выполненный (при этом устройство отключается)

sudo apt-get install git build-essential mkdir ~/src cd ~/src git clone https://github.com/Myria-de/mt7610u_wifi_sta_v3002_dpo_20130916.git cd mt7610u_wifi_sta_v3002_dpo_20130916 make clean make sudo make install 

и перезагрузка. Как обозначено выше, Вы могли бы хотеть к git checkout 4606187110b323c272aed504144ee759b31af8ac прежде, чем работать make и make install . Например, новейшая версия

Работавший для меня, у меня также есть Стрелец T2U с тем же USB-устройством. Я выполняю другую систему (я использовал это с LMDE, ядро 3.11, теперь я нахожусь на Debian (см. выше)), однако решение, которое я связал, попробовали следующими установками:

, Таким образом, мог бы быть хороший шанс, что это будет работать на Вас.

автор (авторы) просто изменил драйвер MT7610U linux от домашней страницы MediaTek для компиляции для устройства, а также нескольких других на основе того же чипсета.
, Если Вы чувствуете себя подобно ему, можно, вероятно, выполнить некоторую команду к разности связанный источник и тот из MediaTek, так как деревья каталогов и исходный файл, вероятно, не отличаются от источника MediaTek.

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

TP-Link Archer T2U Plus / AC600 High Gain USB Wifi Adapter Review & Driver installation Guide for various platforms.

nlkguy/archer-t2u-plus-linux

This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Sign In Required

Please sign in to use Codespaces.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

TP-Link Archer T2U Plus a.k.a AC600 High-Gain

TP-Link Archer T2U Plus a.k.a AC600 High Gain is a very affordable dual band wireless adapter compatible with kali linux and supports monitor mode , soft AP mode,packet injection etc. it supports both 2.4 GHz and 5GHz band and has a 5dBi Antenna for better signal reception. 2357:0120

Why should i buy this adapter ?

This adapter has a Realtek RTL8821AU Chipset at its heart. RTL8821AU has plenty of developer support in linux community and has driver for Kali linux , Parrot OS .etc Archer T2U Plus is on sale under 15 USD ~ 1000 INR , which is a very affordable price for Beginners in Pentesting. 2357:0120 is the USB ID.

Driver for Debian Based Linux Distros (Ubuntu/Kali Linux)(x86_64)

sudo apt install build-essential libelf-dev linux-headers-$(uname -r)

git clone https://github.com/aircrack-ng/rtl8812au.git

if the installation is aborted , check existing dkms modules and uninstall previously installed driver

if you encounter any weird interface name , rename the Wireless interface by following below steps

Driver for Raspberry Pi (Raspbian OS / Kali)(ARM)

sudo apt-get install raspberrypi-kernel-headers

sudo apt-get install build-essential libelf-dev kalipi-kernel-headers

git clone https://github.com/aircrack-ng/rtl8812au.git

sed -i ‘s/CONFIG_PLATFORM_I386_PC = y/CONFIG_PLATFORM_I386_PC = n/g’ Makefile
sed -i ‘s/CONFIG_PLATFORM_ARM_RPI = n/CONFIG_PLATFORM_ARM_RPI = y/g’ Makefile

But for RPI 3B+ & 4B you will need to run those below which builds the ARM64 arch driver:

sed -i ‘s/CONFIG_PLATFORM_I386_PC = y/CONFIG_PLATFORM_I386_PC = n/g’ Makefile
sed -i ‘s/CONFIG_PLATFORM_ARM64_RPI = n/CONFIG_PLATFORM_ARM64_RPI = y/g’ Makefile

In addition, if you receive an error message about unrecognized command line option ‘-mgeneral-regs-only’ (i.e., Raspbian Buster), you will need to run the following commands, then retry building and installing:

Uninstall Driver in Linux

$ dkms status 8812au, 5.6.4.2_35491.20191025, 5.10.63+, armv6l: installed rtl8188fu, 1.0, 5.10.63+, armv6l: installed.``` 

$ sudo dkms remove 8812au/5.6.4.2_35491.20191025 --all Deleting module version: 5.6.4.2_35491.20191025 completely from the DKMS tree. Done. 

About

TP-Link Archer T2U Plus / AC600 High Gain USB Wifi Adapter Review & Driver installation Guide for various platforms.

Источник

How to install TP-Link Archer T2U mini wireless adapter on Ubuntu 20.04 3 min read

I haven’t had a PC for the last 10 years. I’ve always used laptops because it’s much easier and they give you freedom to work everywhere without almost no limitation except the battery life.
Last week, I got a PC, and I have installed it in my workroom where I work, study and make music (I have been working from home just like everyone else in the world since the outbreak of COVID-19).
The internet modem is a bit far from my room, so it’s not really a solution to use any cables!
I have two laptop and both of them have buit-in WiFi (dual band) which delivers a decent internet speed (check the screenshot):
It may not be fast enough for you, but for me, it’s good enough, especially because it’s a wireless connection! My internet subscription from Tele2 is 100Mbps, so getting 95Mbps over WiFi is really good ^_^

Let’s go back to the PC. The PC has no WiFi-adapter, so I had to order a new one. I have ordered TP-Link AC600 (ARCHER T2U, V3) from CoolBlue which is dual band WiFi-adapter! That means it can operate on 5GHz and 2.4GHz networks, and that’s great!

The adapter works fine and doesn’t require any driver installation on Windows 10. Unfortunately, that was not the case on Ubuntu 20.04. Since I use Ubuntu as well on that PC, I also need internet on Ubuntu. The adapter didn’t work out of the box just like it did on Windows 10! To make it even worse, the adapter doesn’t come with any driver installation for Linux. Although CoolBblue claims on their site that it’s compatible with Windows and Linux, I couldn’t find any driver files on the CD that it’s delivered with the adapter. You will find only drivers for Windows and MacOs!

Unfortunately, you won’t find the Linux driver or any other helpful information on the site of TP-Link except a user-guide (Ubuntu 16.04) on how to compile the driver, which is already outdated (palmface).

Here how you can install the driver for your TP-Link Archer T2U mini WiFi-adapter to be able to use it!
Within your Ubuntu terminal (Alt+Ctrl+T) execute following commands:

Install dkms
sudo apt install dkms

Clone the repository of RTL8812AU/21AU and RTL8814AU
git clone https://github.com/aircrack-ng/rtl8812au.git

Navigate to the repo’s folder
cd rtl8812au

Install the driver using the following command
sudo make dkms_install
Previously the installation was performed using dkms_install.sh
sudo ./dkms-install.sh

At the end reboot your computer, after that you will see the WiFi icon next the sound volume icon in the upper-right side of your screen! Enjoy 🙂

To ensure the driver is loaded and running. Execute this command from your terminal
dkms status you must rtl8812au there alongside other modules. In my case, I got the following output:
rtl8812au, 5.6.4.2, 5.4.0-37-generic, x86_64: installed

You can remove the folder of the downloaded repo, but you may need it in the future if you want to remove the driver from your pc!
To remove the driver from your pc just execute the following command within the repo folder
sudo make dkms_remove

Источник

Gyanist

Tutorials and posts about Technology, Productivity, Self-Improvement and the Internet.

Search This Blog

How to make AC600 Archer T2U Nano work on Linux Mint and Ubuntu?

If you have Linux Mint or Ubuntu installed on your computer, the tp-link AC600 Archer T2U Nano won’t work right away if you don’t have the correct drivers installed.

Archer T2U Nano Driver Installation

So to get it working, first we have to install the RTL8812AU driver. The commands are —

git clone https://github.com/aircrack-ng/rtl8812au.git

sudo make dkms_install

Now your Wi-Fi network should start appearing in the list of all the networks. Even after it shows up, the 5GHz option may still not appear. For that, you’ll have to install another driver.

We have to install the driver for USB Wifi adapters using the RTL8821AU and RTL8811AU chipsets.

Follow the commands below —

Now, install the required packages —

sudo apt-get install -y dkms git

Now go to the newly created directory —

Download the driver —

git clone https://github.com/morrownr/8821au.git

Now, go to the newly created directory —

Then we’ll have to run the installation script with the command below —

To complete the process, reboot your system but make sure to save any progress and documents opened on your computer.

Finally reboot the system —

Now the 5GHz option should start appearing on the list of WiFi networks without any issue!

• Get link
• Facebook
• Twitter
• Pinterest
• Email
• Other Apps

Источник