Updating your Belkin adapter’s driver
Updating your Belkin network adapter’s driver fixes the previous version’s bugs and improves its functionality. This action must be done especially if you start experiencing connectivity issues with the computer where you installed the device. To perform an update, follow the steps below:
In this article, the Belkin N150 Wireless USB Adapter, F9L1001 is used as an example.
2. Enter the model number of your device in the search bar and press [Enter]. Your product’s model and version numbers are printed on the device sticker. For an illustration, click the How do I find my model number? link.
3. Under Product Results, click on your product or its Get Support button.
Alternatively, y ou can scroll down on the Downloads section under Support Results and click on your product’s download article then proceed to the sixth step .
You may also scroll down and click Download Software under the DOWNLOADS / FIRMWARE section.
5. You will be redirected to the Belkin network adapters article . Go to USB Network Adapters, look for your network adapter’s Model Number on the table, and click on its link under Download.
7. Click the Download link that corresponds to your adapter’s driver. You may be asked to specify a location to save the file or it may automatically be saved to a default download location depending on the settings of your web browser.
The latest driver is now downloaded to your computer. Continue with the steps below to learn how to install the driver.
Below are the step-by-step procedures for installing the drivers. Choose your device’s OS to start. Make sure that you have already plugged in the adapter to your computer before you begin.
1. On the desktop, hover your mouse over the top-right corner to reveal the Charms bar, then click the Settings icon.
4. Expand the Network adapters list. Right-click on your Belkin network adapter, then click the Update Driver Software option. A new window will open.
5. In the new window, click Browse my computer for driver software to specify a location or a file to be used for updating your network adapter.
6. Click Let me pick from a list of device drivers on my computer to specify the driver file.
7. Click Have Disk to browse for the driver file saved on your computer. A new window will open. Take note that it is recommended to enable the Show compatible hardware option to hide options that are not applicable for your device.
8. In the new window, click Browse. A file browser window will open.
9. In the file browser window, navigate to the location of the driver file you downloaded. Select the file, and then click Open. Make sure to select the driver file according to the architecture of your operating system (32-bit or 64-bit).
10. Click Next to begin installing your selected driver.
11. Click Close when the update is finished. If Windows asks you to restart your computer, do so.
1. Click the pearl icon.
2. Right-click Computer then click Properties.
4. Expand the Network adapters list. Right-click on your Belkin network adapter, then click the Update Driver Software option. A new window will open.
5. In the new window, click Browse my computer for driver software to specify a location or a file to be used for updating your network adapter.
6. Click Let me pick from a list of device drivers on my computer to specify the driver file.
7. Click Have Disk to browse for the driver file saved on your computer. A new window will open. Take note that it is recommended to enable the Show compatible hardware option to hide options that are not applicable for your device.
8. In the new window, click Browse. A file browser will open.
9. In the file browser, navigate to the location of the driver file you downloaded. Select the file, and then click Open. Make sure to select the driver file according to the architecture of your operating system (32-bit or 64-bit).
10. Click Next to begin installing your selected driver.
11. Click Close when the update is finished. If Windows asks you to restart your computer, do so.
Downloading the latest driver of your Belkin wireless adapter
Keeping the driver of your Belkin wireless adapter up-to-date will fix issues that you may have encountered while using it. An updated driver downloaded from the Belkin Support site may also contain device feature enhancements that are not available in the previous versions. This article will guide you on how to download the latest driver for your Belkin wireless adapter.
Before you begin, ensure that you have an active internet connection. If your computer is plugged into the router but cannot get online, disconnect it from your router and plug it directly into your Cable or DSL modem.
Some details on the images and troubleshooting steps may vary depending on your computer’s OS and browser version.
1. Go to the Belkin Support page, enter the model number of your device in the search bar and press [Enter].
NOTE: Your product’s model and version number are printed on the device sticker. For an illustration, click on the How do I find my model number? link. You may also check the model, version, and serial number of your Belkin device .
2. Select your specified product from the search results list then click Get Support to open its product support page. If there is no product support page, check the DOWNLOADS section and click your product’s download article.
The Belkin F5D6050 is used here as an example.
3. Scroll down to the bottom of the product page and click the link under the DOWNLOADS / FIRMWARE section.
5. Click the Download link that corresponds to the file you need and save the file to your computer. It is highly recommended to save this file on your Desktop to help you easily locate the file whenever you need it. You may also rename the file for easier identification.
You should now have successfully downloaded the latest driver for your Belkin wireless adapter. You may read the instructions on how to update the driver of your wireless adapter, and check a list of downloadable software for Belkin network adapters.
Downloading the latest driver of your Belkin wireless adapter
Keeping the driver of your Belkin wireless adapter up-to-date will fix issues that you may have encountered while using it. An updated driver downloaded from the Belkin Support site may also contain device feature enhancements that are not available in the previous versions. This article will guide you on how to download the latest driver for your Belkin wireless adapter.
Before you begin, ensure that you have an active internet connection. If your computer is plugged into the router but cannot get online, disconnect it from your router and plug it directly into your Cable or DSL modem.
Some details on the images and troubleshooting steps may vary depending on your computer’s OS and browser version.
1. Go to the Belkin Support page, enter the model number of your device in the search bar and press [Enter].
NOTE: Your product’s model and version number are printed on the device sticker. For an illustration, click on the How do I find my model number? link. You may also check the model, version, and serial number of your Belkin device .
2. Select your specified product from the search results list then click Get Support to open its product support page. If there is no product support page, check the DOWNLOADS section and click your product’s download article.
The Belkin F5D6050 is used here as an example.
3. Scroll down to the bottom of the product page and click the link under the DOWNLOADS / FIRMWARE section.
5. Click the Download link that corresponds to the file you need and save the file to your computer. It is highly recommended to save this file on your Desktop to help you easily locate the file whenever you need it. You may also rename the file for easier identification.
You should now have successfully downloaded the latest driver for your Belkin wireless adapter. You may read the instructions on how to update the driver of your wireless adapter, and check a list of downloadable software for Belkin network adapters.
Updating your Belkin adapter’s driver
Updating your Belkin network adapter’s driver fixes the previous version’s bugs and improves its functionality. This action must be done especially if you start experiencing connectivity issues with the computer where you installed the device. To perform an update, follow the steps below:
In this article, the Belkin N150 Wireless USB Adapter, F9L1001 is used as an example.
2. Enter the model number of your device in the search bar and press [Enter]. Your product’s model and version numbers are printed on the device sticker. For an illustration, click the How do I find my model number? link.
3. Under Product Results, click on your product or its Get Support button.
Alternatively, y ou can scroll down on the Downloads section under Support Results and click on your product’s download article then proceed to the sixth step .
You may also scroll down and click Download Software under the DOWNLOADS / FIRMWARE section.
5. You will be redirected to the Belkin network adapters article . Go to USB Network Adapters, look for your network adapter’s Model Number on the table, and click on its link under Download.
7. Click the Download link that corresponds to your adapter’s driver. You may be asked to specify a location to save the file or it may automatically be saved to a default download location depending on the settings of your web browser.
The latest driver is now downloaded to your computer. Continue with the steps below to learn how to install the driver.
Below are the step-by-step procedures for installing the drivers. Choose your device’s OS to start. Make sure that you have already plugged in the adapter to your computer before you begin.
1. On the desktop, hover your mouse over the top-right corner to reveal the Charms bar, then click the Settings icon.
4. Expand the Network adapters list. Right-click on your Belkin network adapter, then click the Update Driver Software option. A new window will open.
5. In the new window, click Browse my computer for driver software to specify a location or a file to be used for updating your network adapter.
6. Click Let me pick from a list of device drivers on my computer to specify the driver file.
7. Click Have Disk to browse for the driver file saved on your computer. A new window will open. Take note that it is recommended to enable the Show compatible hardware option to hide options that are not applicable for your device.
8. In the new window, click Browse. A file browser window will open.
9. In the file browser window, navigate to the location of the driver file you downloaded. Select the file, and then click Open. Make sure to select the driver file according to the architecture of your operating system (32-bit or 64-bit).
10. Click Next to begin installing your selected driver.
11. Click Close when the update is finished. If Windows asks you to restart your computer, do so.
1. Click the pearl icon.
2. Right-click Computer then click Properties.
4. Expand the Network adapters list. Right-click on your Belkin network adapter, then click the Update Driver Software option. A new window will open.
5. In the new window, click Browse my computer for driver software to specify a location or a file to be used for updating your network adapter.
6. Click Let me pick from a list of device drivers on my computer to specify the driver file.
7. Click Have Disk to browse for the driver file saved on your computer. A new window will open. Take note that it is recommended to enable the Show compatible hardware option to hide options that are not applicable for your device.
8. In the new window, click Browse. A file browser will open.
9. In the file browser, navigate to the location of the driver file you downloaded. Select the file, and then click Open. Make sure to select the driver file according to the architecture of your operating system (32-bit or 64-bit).
10. Click Next to begin installing your selected driver.
11. Click Close when the update is finished. If Windows asks you to restart your computer, do so.