Bluetooth bootcamp driver windows 10

Bluetooth bootcamp driver windows 10

I followed this tutorial to install windows on an external SSD. After doing all the updates my bluetooth mouse worked for only 5 sec then stopped working. Regular solution to this is to change power management settings on bluetooth radio in device manager but there was no power management tab visible. I updated «Broadcom Serial Bus Driver» according to this answer here .

  • Right click start menu and choose «Device Manager».
  • Click on «View» menu and choose «Devices by connection».
  • Find «Broadcom Serial Bus Driver over UART Bus Enumerator», it should be under «Intel(R) Serial IO UART Host Controller».
  • Right click on it and select update driver.

It’s fully working for me now! I’ll report here if I find any more problems or alternative fixes.

Thanks to Julius Pargac & Kujo_Araragi .

My Config:

— Device: MacBookPro14,1 (13-inch, 2017, Two Thunderbolt 3 ports)

— Drive: WD My Passport SSD

— OS: Windows 10 Pro version 2004

— Bootcamp Version: 6.1.10

!! UPDATE 01 !!

If you are having problems with your mouse stuttering while downloading something from Wi-Fi etc. follow these steps. (original post here )

  • Right click start menu and choose «Device Manager».
  • Under «Network Adapters» you’ll see Realtek or Broadcom network adapter, double click and go to «Advanced» tab.
  • Set «Antenna Diversity» to «Aux»
  • Set «Bluetooth Collaboration» to «Enable»
  • Set «Roaming Decision» to «Optimize Bandwidth»
  • Restart your computer.

Thanks to: CF5 , RBZ & Aria Rezaei on superuser.com

!! UPDATE 02 !!

If you got an error saying «you already got the latest driver» you have to install the driver manually Follow these steps: (original post here )

  • Download this driver file.
  • Extract the .cab file to a folder of your choice.
  • Right click start menu and choose «Device Manager».
  • Find «Broadcom Serial Bus Driver over UART Bus Enumerator», it should be under «Intel(R) Serial IO UART Host Controller».
  • Right click on it and select update driver.
  • Choose to select the location of the new driver manually and browse to the folder where you extracted the driver.
  • If you already have the driver installed and want to update to a newer version got to «Let me pick from a list of device drivers on my computer».
  • Click «Have Disk»
  • Browse to the folder where you extracted the driver and click «Ok».

Thanks to: studiohorizon on Reddit

!! UPDATE 03 !!

It seems like bluetooth doesn’t work properly if I don’t turn off bluetooth in macOS before I switch to boot camp. It might be associated with the problem mentioned in this post .

Источник

Where can I find Windows 10 Bluetooth drivers for my mid-2011 Macbook Pro?

I have installed the Windows 10 Technical Preview on my mid-2011 MacBook Pro 13-inch. I had been running Windows 7 with no problems. The installation had been done using Apple’s BootCamp software. The problem is that, in Windows 10 Device Manager, my Bluetooth USB Host Controller (found in «Other Devices») shows that no drivers are installed. Worse yet, when I click on Properties for the device, I get:

Читайте также:  Asus x54h драйвера bluetooth windows 10

The drivers for this device are not installed. (Code 28)

There are no compatible drivers for this device.

To find a driver for this device, click Update Driver.

And, of course, no bluetooth radios show up in the Device Manager. Note that all of this was working perfectly in Windows 7.

Does anyone have any ideas?

MacBook Pro, OS X Yosemite (10.10.2), Windows 10 Technical Preview

Posted on Feb 3, 2015 5:50 AM

Also, on the OSX side look in About This Mac -> More Info -> System Report -> Bluetooth and post the hardware information so non-Apple drivers can also be located/tested.

Posted on Feb 3, 2015 5:56 AM

2) Extract the AppleBluetoothBroadcomInstaller64.exe with 7zip or anything else

3) Go to Device manager find the bluetooth device problem :

4) Update Driver Software > Browser my computer for driver software > let me pick from a list of device drivers on my computer > Have Disk > Browse the extracted folder > OK > Next > Close

5) Its should worked again.

1.) Launch Boot Camp Assistant
2.) Choose «Download the latest Windows support software from Apple» (FAT formatted external USB drive needed)
3.) Boot into Windows 10
4.) Open «BootCamp» folder on your USB drive and double click «setup.exe»

This worked on a 15″ Retina MacBook Pro mid 2014 running Windows 10 Pro.

So this may be a little risky, but. there’s a freeware app called Bluetooth Driver Installer. I just ran 1.0.1.98 Beta 64-bit on Windows 10 Professional 10240 (presumably RTM). Assuming this app is safe (I crossed my fingers), it does create a restore point before it starts installing, so if it screws anything up, you should be able to roll back. The first time I ran it, it failed because it couldn’t write to C:\Windows\inf\bth.inf. Here’s a workaround.

Browse to the file, right click, click Properties. On the ‘Security’ tab, click ‘Advanced’. ‘Owner’ should show ‘TrustedInstaller’. Change it to your username. Hit OK, OK, OK, etc. a few times to get out of the properties dialog. Then pull up the properties on it again, go back to the ‘Security’ tab. Hit ‘Edit’ and add ‘Everyone’ — Full Control. Now the installer works. In Device Manager, it shows up under the Bluetooth sub-tree as ‘Microsoft Bluetooth Enumerator’, ‘Microsoft Bluetooth LE Enumerator’, and ‘My new generic Bluetooth adapter’.

Afterwards, I recommend putting all the bth.inf permissions back to the way they were. Edit the permissions again and remove the ‘Everyone’ permission you created. Then click ‘Advanced’. Click ‘Change’ next to the Owner. You have to type in ‘NT Service\TrustedInstaller’ (this won’t show up in search results, so just type/copy+paste it w/o the »s). Hit OK a bunch of times and you’re all set.

Читайте также:  Адаптер елм 327 блютуз подключение

I just did this a few minutes ago so I don’t know whether Windows 10 will undo the modifications one day. Also sfc /scannow may not like it.

Источник

Bluetooth не распознается в Windows 10, 8 в BootCamp [FIX]

Bluetooth не распознается после того, как некоторые пользователи BootCamp обновились до Windows 10, 8.1. Прочтите это руководство, чтобы узнать, как можно решить эту проблему.

Обновления Windows 10, 8.1 часто вызывают много проблем у тех, кто использует BootCamp для запуска его на своих устройствах Mac OS. Те, кто купил в конце 2013 года ноутбуки Retina MacBook, кажутся наиболее уязвимыми, и некоторые из них остро нуждаются в поддержке BootCamp в Windows 8.1. Теперь есть еще одна проблема, связанная с Windows 8.1, которую мы обнаружили на форумах поддержки Apple: Bluetoth либо не распознан, либо не может быть включен .

Это очень неприятная проблема, поскольку она не находит и не сопрягает ваше устройство Bluetooth, например клавиатуру или динамик. Для некоторых пользователей решение проблемы с Bluetooth в Windows 8.1 было очень простым, так как один из них сообщает:

После обновления Windows до 8.1 в Bootcamp мне пришлось удалить мой драйвер MotioninJoy для распознавания Bluetooth.

Я наконец понял, как заставить мой компьютер распознавать драйвер bluetooth в Windows 8 и 8.1 . По какой-то причине драйвер MotionInJoy, который я установил некоторое время назад, заставил драйвер Bluetooth исчезнуть. То, что вы хотите сделать, это зайти в Диспетчер устройств (Настройки/Панель управления/Диспетчер устройств). В самом низу ваш дополнительный игровой драйвер должен быть для MotionInJoy. Я просто удалил его, подождал 1 минуту и ​​снова открыл диспетчер устройств. Затем появился драйвер Bluetooth, и я снова смог подключить свою клавиатуру . Я сейчас пишу с него

Устранить проблемы с Bluetooth с BootCamp

Итак, вот шаги, необходимые для решения проблемы Bluetooth с BootCamp.

1. Удалите драйвер игры MotionInJoy

  1. Зайдите в Диспетчер устройств (Настройки/Панель управления/Диспетчер устройств)
  2. Найдите дополнительный драйвер игры MotionInJoy внизу списка
  3. Удалите его, подождите несколько минут или перезагрузите систему
  4. Откройте снова диспетчер устройств и драйвер Bluetooth должен быть там

2. Переустановите драйверы

Если проблема не устранена, попробуйте переустановить драйверы Apple. Запустите BootCamp со стороны Mac, и вы увидите сообщение с предложением загрузить новые драйверы Windows. Загрузите доступные драйверы. Теперь запустите Windows и установите соответствующие драйверы.

– СВЯЗАННО: более 60% пользователей Windows переключатся на MacOS для большей конфиденциальности

3. Установите Apple встроенный драйвер Bluetooth

Один пользователь предположил, что установка встроенного драйвера Apple от Apple устранила проблему. Вот шаги, чтобы следовать:

  1. Откройте Диспетчер устройств> перейдите в поддерево Bluetooth-радио> щелкните правой кнопкой мыши на «Apple Broadcom Встроенный Bluetooth»> выберите «Обновить программное обеспечение драйвера»
  2. Перейдите к пункту «Поиск драйверов на моем компьютере».> Позвольте выбрать из списка драйверов устройств на моем компьютере.
  3. Теперь выберите «Apple Inc.» для производителя и «Apple Встроенный Bluetooth» для модели> нажмите «Далее»
  4. После того, как драйвер будет установлен, вы должны увидеть «Apple Bluetooth» и «Microsoft Bluetooth Enumerator», перечисленные в разделе «Радио Bluetooth» в диспетчере устройств.
  5. Теперь вы сможете настроить ваши устройства Bluetooth.

Попробуйте исправления и дайте нам знать в разделе комментариев, если они сделали работу за вас.

Источник

FIX: Bluetooth Not Recognized in Windows 10/11 on BootCamp

Bluetooth Not in Windows 10 BootCamp

Bluetooth is not recognized after some BootCamp users have upgraded to Windows 10, 8.1. Read this guide to learn how you can fix this problem.

Читайте также:  Лучшие bluetooth наушники на шнурке

Windows 10, 8.1 upgrades often cause a lot of problems for those who use BootCamp to run it on their Mac OS devices. Those who have bought the late 2013 Retina MacBook laptops seem to be the most exposed and some of them are in desperate need of BootCamp support in Windows 8.1. Now, there’s another Windows 8.1 related issue that we discovered from Apple’s support forums – Bluetoth is either not recognized or it can’t be turned on.

This is a very annoying issue as it won’t find and pair your Bluetooth device, such as the keyboard or a speaker. For some users, the fix for the Bluetooth issue in Windows 8.1 was very simple, as one of them reports:

After upgrading Windows to 8.1 in Bootcamp I had to uninstall my MotioninJoy driver in order for Bluetooth to be recognized.

And here’s the full explanation:

I finally figured out how to get my computer to recognize the bluetooth driver in Windows 8 and 8.1. For some reason the MotionInJoy driver I installed a while ago made the Bluetooth driver disappear. What you want to do is go to Device Manager (Settings/Control Panel/Device Manager). At the very bottom your extra game driver should be for MotionInJoy. I simply uninstalled it, waited 1 min and re-opened the device manager. Then the Bluetooth driver was there and I could pair my keyboard again. I’m currently writing from it

Fix Bluetooth issues with BootCamp

So, here are the steps needed to fix the Bluetooth problem with BootCamp.

1. Uninstall MotionInJoy game driver

  1. Go to Device Manager (Settings/Control Panel/Device Manager)
  2. Find the extra game driver MotionInJoy at the bottom of the list
  3. Uninstall it, wait for a few minutes or restart your system
  4. Open again the Device Manager and the Bluetooth Driver should be there

2. Reinstall the drivers

If the issue persists, try reinstalling the Apple drivers. Run BootCamp from the Mac side and you should see a message inviting you to download new Windows drivers. Download the available drivers. Now, launch Windows and install the respective drivers.

3. Install Apple built-in Bluetooth driver

One user suggested that installing the Apple built-in Bluetooth driver fixed the problem. Here are the steps to follow:

  1. Open Device Manager > go to the Bluetooth Radios subtree > right-click on ‘Apple Broadcom Built-in Bluetooth’ > select ‘Update Driver Software’
  2. Go to ‘Browse my computer for driver software’ > Let me pick from a list of device drivers on my computer
  3. Now, select Apple Inc. for Manufacturer and ‘Apple Built-in Bluetooth’ for Model > hit Next
  4. Once the driver has been installed, you should see the ‘Apple Built-in Bluetooth’ and ‘Microsoft Bluetooth Enumerator’ listed under Bluetooth Radios in Device Manager.
  5. You should now be able to setup your Bluetooth devices.

Try the fixes and let us know in the comments section if they did the job for you.

RELATED STORIES TO CHECK OUT:

Источник

Оцените статью
Adblock
detector