Bluetooth kali linux установка

Troubleshoot, fix and enable Bluetooth on Kali Linux

In this short tutorial, we’ll show how to enable Bluetooth on Kali Linux. We’ll go through the commons steps for setting up the Bluetooth and cover different situations and possible issues:

• check if you have all core system packages in place
• assure that your Bluetooth device is not blocked
• install Blueman package
• check service status and start it if it’s not already started
• potential issues and solutions:
  • an issue with libgcc-9-dev package— to solve this issue check out this tutorial

  2. Check if you have all core system packages in place

  If you installed the basic/core version of Kali Linux, it’s good practice to do do the update and upgrade after the installation, so that you have a complete package list. For that purpose use the following commands:

  sudo apt-get update sudo apt-get upgrade

  If these commands results say that everything is up to date and you’re sure that you didn’t do any updates on your new system, check the contents of the /etc/apt/sources.list fille. For this purpose, you can use any text editor, for example, nano:

  sudo nano /etc/apt/sources.list

  In my case, I downloaded and installed a rolling release and I didn’t have any repositories configured. The contents of my sources.list file was as follows:

  # deb cdrom:[Debian GNU/Linux 2019.4 _Kali-rolling_ - Official Snapshot am> #deb cdrom:[Debian GNU/Linux 2019.4 _Kali-rolling_ - Official Snapshot amd> # This system was installed using small removable media # (e.g. netinst, live or single CD). The matching "deb cdrom" # entries were disabled at the end of the installation process. # For information about how to configure apt package sources, # see the sources.list(5) manual. 

  deb http://http.kali.org/kali kali-rolling main non-free contrib

  After I did this, I executed update&upgrade again, waited for a half an hour and in the end I actually had all things in place.

  3. Be sure that your Bluetooth device is not blocked

  Sometimes, it happens that the Bluetooth device itself is blocked/disabled. This could happen due to software or hardware reasons. To check the device status, use the rfkill list command:

  0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no 3: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Assure that the Bluetooth device you’re trying to use for the connection is not blocked. In case that it’s blocked, use the following command to unblock it:

  sudo rfkill unblock bluetooth

  For a more detailed tutorial on rfkill tool, check out this tutorial.

  3. Assure that Bluetooth service is started

  If your Bluetooth device was blocked/disabled, it’s a chance that the Bluetooth service is not started on your machine, so start it using:

  sudo service bluetooth start

  4. Install blueman package

  Blueman is a Bluetooth manager with great UI that uses blueZ in the background. It will help you to easily manage your Bluetooth devices. If you don’t have it already, install it using

  sudo apt-get install blueman

  In this step, I had the issue with package versions saying:

  After all of this goes fine, you’ll see the Bluetooth icon next to the clock and you’ll be able to connect and use your Bluetooth devices.

  5. Conclusion

  In this tutorial, we showed how to enable Bluetooth on Kali Linux and troubleshoot the issues.

  Check also.

  Источник

  How To Install Bluetooth Adapter in Kali Linux [2022]

  

  With the increasing popularity of Bluetooth devices like mice, keyboards, and headsets, it can be difficult to imagine using the wired versions of these devices. Some Linux distributions as well as kali Linux comes with preinstalled Bluetooth for you right out of the box. But sometimes it doesn’t work. However, I will guide you on how to install Kali Linux Bluetooth.

  Many Linux users complain that the Bluetooth adapter does not work after fresh Kali Linux installation. Bluetooth connectivity issues in Linux have been around for a long time. Many users get trouble sharing their documents with others. Others struggle to link their PCs to their handhelds or headphones in order to listen to their favorite playlists or binge-watch videos.

  This problem still exists in the Ubuntu LTS and Kali Linux versions that were just released. There are a lot of user complaints about this on the Linux forums. So, in this post, we’ll show you how to solve this problem once and for all.

  Probable Kali Linux Bluetooth problems

  • Bluetooth Adapter not working
  • Bluetooth toggle not showing in the top panel
  • Can’t turn on the Bluetooth service

  How does Bluetooth work in Kali Linux?

  BlueZ is the official Linux Bluetooth stack. It provides, in its modular way, support for the core Bluetooth layers and protocols.

  • Bluetooth kernel subsystem core
  • L2CAP and SCO audio kernel layers

  How to Set Up Bluetooth in Kali Linux?

  This short tutorial will show how to install Bluetooth in Kali Linux. We’ll go through the commons steps for setting up the Bluetooth and cover different situations:

  

  Update Kali Linux Bluetooth driver including all core system packages

  

  If you installed the basic/core version of Kali Linux, it’s good practice to do the update and upgrade after the installation, so that you have a complete packing list. For that purpose use the following commands:
  sudo apt-get update
  sudo apt-get upgrade

  

  If your distribution doesn’t already have Bluetooth set up for you, you will need to install Bluez Blueman, which contains the driver stack for Bluetooth adapters as well as utilities for the CLI administration of Bluetooth. Install it using:
  sudo apt-get install blueman bluez-utils bluez bluetooth

  

  After installation, you will need to activate and start the Bluetooth service. If you are using a Bluetooth dongle, you will first have to run the following command:
  modprobe btusb
  To enable the Bluetooth service, run the following command:
  sudo systemctl enable bluetooth.service
  To start the Bluetooth service, use this command:
  sudo systemctl start bluetooth.service
  
  Connect your devices
  You will see the Bluetooth icon on the top of the panel

  

  Click on the icon and you will see like below:

  Install it using this command: sudo dnf install bluez bluez-tools

  Using the following command: sudo pacman -S bluez bluez-utils

  The Dongle or device may not be recognized by the system. This issue usually arises because the drivers for the respective adapter are not installed. Some adapters are also not recognized by Linux. In that case, you should find a compatible adapter.

  There are some Bluetooth devices that block the connections by default. This is a frequent case in Linux. You can check those settings manually or using the terminal. If your Bluetooth device was blocked/disabled, it’s a chance that the Bluetooth service is not started on your machine, so start it using: sudo service bluetooth start

  Wrapping Up

  In short, I tried to cover how to set up Kali Linux Bluetooth. But still, if you have any connection issues, please let me know. Do comment below this content. I will try my best to solve your problem. There can be several reasons why you cannot connect a Bluetooth device to your system.

  Источник

  How To Install Bluetooth Adapter in Kali Linux [2023]

  

  With the increasing popularity of Bluetooth devices like mice, keyboards, and headsets, it can be difficult to imagine using the wired versions of these devices. Some Linux distributions as well as kali Linux come with preinstalled Bluetooth for you right out of the box. But sometimes it doesn’t work. However, I will guide you on how to install Kali Linux Bluetooth.

  Many Linux users complain that the Bluetooth adapter does not work after a fresh Kali Linux installation. Bluetooth connectivity issues in Linux have been around for a long time. Many users get trouble sharing their documents with others. Others struggle to link their PCs to their handhelds or headphones in order to listen to their favorite playlists or binge-watch videos.

  This problem still exists in the Ubuntu LTS and Kali Linux versions that were just released. There are a lot of user complaints about this on the Linux forums. So, in this post, we’ll show you how to solve this problem once and for all.

  Probable Kali Linux Bluetooth problems

  • Bluetooth Adapter not working
  • Bluetooth toggle not showing in the top panel
  • Can’t turn on the Bluetooth service
  • Kali Linux Bluetooth Manager is not found in the application menu
  • The system seems to recognize devices, but cannot actually find any devices.

  How does Bluetooth work in Kali Linux?

  BlueZ is the official Linux Bluetooth stack. It provides, in its modular way, support for the core Bluetooth layers and protocols.

  Currently, BlueZ consists of many separate modules:

  • Bluetooth kernel subsystem core
  • L2CAP and SCO audio kernel layers
  • RFCOMM, BNEP, CMTP, and HIDP kernel implementations
  • HCI UART, USB, PCMCIA, and virtual device drivers
  • General Bluetooth and SDP libraries and daemons
  • Configuration and testing utilities
  • Protocol decoding and analysis tools

  How to Set Up Bluetooth in Kali Linux?

  This short tutorial will show how to install Bluetooth in Kali Linux. We’ll go through the commons steps for setting up Bluetooth and cover different situations:

  Источник

  Читайте также:  Acer aspire 5742 блютуз