Bluetooth менеджер linux mint

Bluetooth менеджер linux mint

Great bluetooth app but with a generic bluetooth mouse, the connection is sluggish and i need toclick to make the cursor move (it moves after 3 seconds). The bluetooth mouse was connected when the error happend. The app works great with my Razor mouse.

now bundeled with with Mint21. It takes a lot of random trial and error to get anything connected, very frustrating, usually works in the end, average connect time is 30 minutes of messing around.

I had issues connecting my Bose 700 to the BT, looking online for an answer I found this software and it’s so much better then the built-in LM/LMDE one, so so much!

I was having problems connecting my mouse, this program fixed it. Work quite nicely.

A very useful program, it works without any problems. Many thanks to the developer!

Excellent! Meilleur que celui d’origine qui est plus esthetique qu’efficace :p

Its the bluetooth manager for humans,

i had problem with bad music interpretation via BT audio receiver with preinstalled bluetooth manager, but now its OK 🙂

I had endless issues with Blueberry and eventually found out about Blueman. I installed the PulseAudio bluetooth module and everything works like a charm.

I could pair various head sets. Mpow flame and two other Chinese Bluetooth headsets. It worked well for hours and many times. My Cambridge Silicon Radio — CSR V4.0 dongle came with only Windows Drivers so I was glad to find that Linux had packages that supported it. At one point my headset would not receive sound properly, I could not switch between A2DP and another audio type for the headset. I either dropped connection or played the sound out of phase and distorted reminiscent of the Jazz in Planet of the Apes. I hunted around looking for information on it but could not find a one-stop solution explaining how this software works with the dongle. Some discussion on killing multiple processes but I’m not sure what happened. My phone handles all these headsets automatically so connecting to Linux is a comparatively elaborate process. After giving up for a day I plugged in for a fresh start and managed to get one headset up and running. My conclusion is that Linux Mint does a very good job and that the sound is usually very clear and good considering the low cost of the equipment I used but there is an opportunity somehow for more people to get involved and educate the rest of us on what makes all this magic happen or how to use the tools to troubleshoot and fix connection issues..

So far seems good. Would like a tad more info about what some of icons & graphics are actually referring to.

Absolutely brilliant . connects instantly, and to be honest, works far better than it did when the computer ran on Windows 7 with the standard software,

Had trouble with the default bluetooth manager in KDE 18, devices would be paired but failt to connect/setup as the wrong device type was auto-assigned and no option is proveded to change that, in Blueman you assign device type during the initial pairing operation which avoids the issue. The interface is rather clunky and takes a while to work out how to use it, also removing devices often fails!! But overall it works, so well done.

Bluean is great! I removed blueberry because it did not work at all, installed blueman in stead. blueman worked on first attempt! Great!

just installed Linux Mint 19, worked right away with my CSR 4.0 dongle plugged in

yea the only one bluetooth tool that works 4 me (Linux Mint17.3)

Doesn’t exist in package manager anymore. Doesn’t pair with headphones.

Will NOT pair with phone! The Battle is lost.

lol as ryannerd said.. finally works per knielson’s suggestion. add new ppa: cschramm/blueman

Источник

How do I connect Bluetooth headset on Linux Mint

Bluetooth is a short-range wireless technology that is meant to connect electronic devices to share data or connect for media-related purposes. The major application domain of Bluetooth technology is to use it for media-related tasks or sharing data. Bluetooth allows two devices to connect without requiring any modem, network, or any third medium. Therefore, it is the prior choice of users to share files/data (within a short-range). Users may connect the speakers with any computing device or smartphone to play music/movies, or to have a handset calling and texting access.

Following the importance of this technology, this guide provides a demonstration to connect Bluetooth headset to the Linux Mint system.

How do I connect Bluetooth headset on Linux Mint

This section contains the procedural guide to connect Bluetooth headset on Linux Mint using the Command Line Interface, and Graphical User Interface methods:

How to connect Bluetooth headset using the terminal in Linux Mint

To connect Bluetooth to your Linux Mint, you must follow the steps provided below.

Step 1 : Before getting into details, check the status of Bluetooth service with the help of the command written below:

If the service is disabled or not working; you may provide the following commands to start and enable the Bluetooth service.

$ sudo systemctl start bluetooth

$ sudo systemctl enable bluetooth

Step 2 : Ensure that your system’s Bluetooth is discoverable to all nearby devices. For this, use the discoverable option of bluetoothctl as shown in the below-mentioned command.

Note : The bluetoothctl is a Linux-based utility to manage Bluetooth devices on the system

Now, scan for the devices by issuing the below-stated command.

The above command lists down the available devices with their MAC (Media Access Control Address) addresses as well. As in our case, the device is “MINISO-V4“, so we have noted its MAC address.

Step 3 : Pair the specific device using the following syntax. For instance, the command provided below will pair the “MINISO-V4” headset using its MAC address.

After pairing, it is recommended that you must trust the paired device with the help of the command written below.

After pairing, check for the list of paired devices by using the command written below. And you will get your paired devices list in the output.

Step 4 : And after pairing, connect that Bluetooth headset device with the help of the command provided below. Upon successful connection, the “Connection successful” message is returned.

Step 5 : Unpair or Disconnect

However, if you want to disconnect any device then you would execute the bluetoothctl command in the following way.

You can unpair any device by using the remove keyword as shown in the command below.

How to connect Bluetooth headset using Graphical Interface in Linux Mint

If your Bluetooth manager is working fine, then you will find the Bluetooth symbol on the desktop taskbar as seen in the image below.

Upon clicking, all the devices will be displayed as can be seen in the image below and here the name of the headset device is “MINISO-V4”.

After clicking on the Bluetooth headset name, the connection will be made instantaneously.

And the status will be changed to “Connected” as displayed below.

You can get further details by clicking on it and after doing so the interface obtained is displayed below.

From the image shown above:

– You can disconnect your headset by clicking on the “Remove Device” button

– To get detailed sound settings, you can click “Sound Settings”

Conclusion

Wireless technology has improved the accessibility of several devices in a network. Bluetooth is a short-range wireless technology being used to connect electronic devices, share data or play any music. This guide provides a detailed demonstration to use Bluetooth to connect your headset to the Linux Mint system. We have also provided the installation and configuration of the Bluetooth manager on Linux Mint; this configuration is required as in many cases users are not able to get the nearby devices.

Источник

bluetooth в linuxmint

Намедни взялся настроить на ноутбуке жены линукс взамен порядком подзабитой w7 всякими мейлгвардами и другими маргетингтулз.exe бякостями ну и чтобы обезопаситься первентивно. По опыту использования на работе выбор дистрибутива пал на Linuxmint Mate 64 bit. Ноутбук — Sony Vaio, модель «такой, розовенький».

Система встала успешно, всё оборудование увиделось «слёту», разве что потребовалось настроить звук: выставить у встроенного (Built-in Audio) профиль Analog Stereo Output и этот же Built-in указать во вкладке «Выход».

Не заработал же под Mate только Bluetooth. Борьба с ним весьма легка: заходим в менеджер пакетов и находим там mate-bluetooth, который безжалостно удаляем. После чего в терминале запускаем:

sudo -s
apt-get update
apt-get install gnome-bluetooth
bluetooth-wizard (последняя команда запустит мастер настройки подключения нового устройства)

Теперь у моей жены ее розовенькая сонька, как и на винде, успешно дружит с ее розовенькой же bluetooth мышкой (модель VGP-BMS20).

Если не помогло — пишите, разберемся.
Форум таких же мучеников — тут: http://forums.linuxmint.com/viewtopic.php?t=102417&f=206

Добавить комментарий Отменить ответ

Для отправки комментария вам необходимо авторизоваться.

• AltLinux
• DevOps
  • lvm create and resize
  • Terraform configs
  • Postgres backup & restore
  • Gitlab восстановление из бэкапа
  • Gitlab: настройка mattermost
  • nginx и tomcat https для Jira
  • Proxy settings nginx http2 installation
  • Настройка Jira Software — подготовка к первому запуску
  • Настройка почтового сервера на Jira Confluence
  • Обновление Jira Confluence на CentOS
  • Установка gitlab на Centos
  • Установка Jira Confluence на CentOS
  • Установка Jira Software на CentOS
  • Установка и запуск PostgreSQL на CentOS
  • SSL-объединенный сертификат
  • Борьба со спам-ботами на сайте.
  • Бэкап сайта — он же перенос WordPress на другой сайт
  • Несколько сайтов на одном сервере
  • Обновление вордпресс
  • Обновление сертификата letsencrypt
  • Отключение Selinux
  • Отслеживание доступности сайта.
  • Перенос WordPress — смена доменного имени
  • Подключение к стороннему MySQL
  • Защита консоли (ssh) — ручная настройка
  • Защита консоли сервера (sshd)
  • Защита консоли сервера: Fail2ban
  • Как распознать вирус и вредонос во вложении
  • Надёжность паролей — наглядная демонстрация
  • connect to ubuntu desktop sharing from mac
  • MacOs encrypt-decrypt disk
  • Как подключить ntfs диск к маку на редактирование
  • Настрока области просмотра в Mail
  • Русская клавиатура на макбуке
  • Уязвимость в Макбуке
  • Про торговых ботов
  • DNS привязка сайта.
  • Автозагрузка в CentOS: добавление демона
  • Выбор CMS платформы.
  • Выбор доменного имени.
  • Выбор хостинга.
  • Настройка постоянных ссылок
  • Размещение. Хостинг.
  • Регистрация доменного имени. Выбор регистратора.
  • Связь с Фейсбуком
  • Установка CMS платформы WordPress.
  • Установка mysql на Centos 7
  • Установка счетчиков посещаемости.
  • Evernote на Ubuntu и Linux Mint
  • Блокирование отображения рекламы
  • Браузер по умолчанию
  • Защита от отслеживания в Firefox
  • Как посещать любые сайты
  • Меняющиеся обои рабочего стола в линуксе
  • Настройка eToken на Линукс
  • Настройка браузера Chrome
  • Настройка превьюшек в LinuxMint
  • Открытие файлов без сохранения в хроме
  • Подключение внешнего/сетевого диска
  • Проверка контрольных сумм
  • Установка Clear.OS с загрузочной флешки и настройка шлюза
  • Установка сертификата для Цитрикса
  • Хранение паролей
  • Шифрованное облачное хранилище

  Источник