Both wifi and ethernet

Use wifi and ethernet simultaneously on Windows 10

I have noticed recently that during downloading or updating games in my Steam library, I can somehow manage to double the speed at which this occurs by unplugging my ethernet cable, waiting a few seconds, and then plugging it back in again. This allows me to utilise both my wifi connection and my ethernet connection (to the same router) at the same time. However, as soon as the Steam operation has completed, Windows (I believe) defaults back to only using my ethernet connection and disables the wifi. I would like to know if there is any way to stop Windows from doing this — without the use of third-party applications — to allow me to use both connections simultaneously, or if it’s just a weird thing that Steam does. Thanks in advance, James. Edit: It turns out that it’s not just steam that does this thing with the internet; Nvidia GeForce Experience and some other apps manage to sustain a connection over ethernet and WiFi at the same time, but when the download is complete, Windows (I guess) turns off WiFi connectivity and defaults to ethernet.

2 Answers 2

I am studying Computer Science at a university where I have 100mbps ethernet and 100mbps wifi available in my dorm. I have always been using the ethernet for everything as its way more stable when downloading games than wifi which fluctuates a lot. I wanted to combine both of them to increase my speed and looked online and found that i have to make a network bridge so that both the connections get combined. The steps are as below:

1. Go to Control Panel and click Network and Internet.
2. Click Network and Sharing Center.
3. On the left column click change adapter settings.
4. Select both the connections and right click to see options. Click network bridge.
5. Windows will automatically make a network bridge and you are done.

Where there is throttling on the server side, it may be possible to increase download speed by opening additional connections. The speed increase you observed is likely because you’ve opened a second download thread, not because you’re getting throughput over Ethernet (which should be the maximum speed of the router) and WiFi (which may be slower, particularly far from the router).

You state specifically «without the use of third-party applications». In that case, you’re out of luck. Microsoft Edge and IE do not offer multiple connections for a single download, though you can try this MS fix to increase number of downloads, as opposed to connections. There are add-on application managers, some installed as extensions to a browser, but they are all third-party tools. There might even be a browser with such a manger built into it, but, again, that’s a third-party app.

You may reconsider and try a third-party download manager, such as Free Download Manager (FDM). In the screenshot below, the Low setting allows up to 15 simultaneous connections to one site, five connections each to three sites, or any other combination up to the total of 15 connections.

• Not all sites allow multiple connections. In those cases, there will be no speed increase over direct download through a browser.
• Though FDM appeared clean, check any downloaded application at VirusTotal.com. Some applications also include adware or malware, .

Источник

Is it Feasible to Connect Both Ethernet and Wi-Fi to a Single Network?

To prevent unnecessary hassle, it is recommended to modify your routing table to segregate certain traffic over specific interfaces rather than adding static routes for specific IP networks. The latter approach may result in traffic being directed out the wrong interface, requiring frequent maintenance.

Possible to have both Wi-Fi and Ethernet connected to the same network?

As you may have discovered, it is not recommended to have addresses from the same network on multiple interfaces due to routing concerns.

Each interface in routing requires a distinct network, and due to overlapping, one of them will eventually take priority over the other.

To connect multiple interfaces to a single network, it is recommended to combine them in a bridge interface.

The IP address will be «owned» by the bridge interface, while the true interfaces will be grouped together under a virtual entity indicated by br0 .

allow-hotplug eth0 iface eth0 inet manual allow-hotplug wlan0 iface wlan0 inet manual auto br0 iface br0 inet dhcp bridge_ports eth0 wlan0 

Set up Network Interfaces as a Bridge or Switch in Debian Linux

Due to my insufficient «reputation points» to comment, this is more of an addendum rather than a comprehensive solution.

Initially, it is necessary to ensure the autonomous functioning of both interfaces. Subsequently, you may choose to distribute outgoing connections across both interfaces rather than creating a bridge.

The website with the URL «https://www.tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.rpdb.multiple-links.html» provides information on utilizing multiple links for routing purposes.

At the beginning, I had two devices configured by network manager with the default route to the internet.

❯ ip route default via 192.168.0.1 dev eno1 proto dhcp metric 100 default via 192.168.0.1 dev wlp4s0 proto dhcp metric 600 169.254.0.0/16 dev wlp4s0 scope link metric 1000 192.168.0.0/24 dev eno1 proto kernel scope link src 192.168.0.246 metric 100 192.168.0.0/24 dev wlp4s0 proto kernel scope link src 192.168.0.213 metric 600 

Subsequently, I executed the instruction outlined in the load balancing section.

Here’s a resource that can be helpful for advanced routing with multiple links: the lartc.rpdb.multiple-links.html page on the TLDP website.

❯ P1=192.168.0.1 ❯ P2=192.168.0.1 ❯ IF1=eno1 ❯ IF2=wlp4s0 ❯ ip route add default scope global nexthop via $P1 dev $IF1 weight 1 \ nexthop via $P2 dev $IF2 weight 1 

Success! I have established connections on both devices.

❯ ip route default nexthop via 192.168.0.1 dev eno1 weight 1 nexthop via 192.168.0.1 dev wlp4s0 weight 1 default via 192.168.0.1 dev eno1 proto dhcp metric 100 default via 192.168.0.1 dev wlp4s0 proto dhcp metric 600 169.254.0.0/16 dev wlp4s0 scope link metric 1000 192.168.0.0/24 dev eno1 proto kernel scope link src 192.168.0.246 metric 100 192.168.0.0/24 dev wlp4s0 proto kernel scope link src 192.168.0.213 metric 600 

It could potentially complicate the debugging process in case there are any issues with the connection 😉

I am not familiar with the process of retaining the configuration after reboots, particularly when used alongside the network manager.

Running wifi and ethernet at the same time, Sorry but you can’t have wifi and ethernet at the same time on a computer, the best option is ethernet for reliable internet. You can use the electric wire for transmission and see an improvement in the best case, but it is not the same as an ethernet cable. I hope this information is useful to you.

How to Use Ethernet and WiFi at same time in Windows

This Tutorial helps to How to Use Ethernet and WiFi at same time in Windows 10 [Tutorial ]Thanks friends for watching this Video,Please Subscribe and Support

How to make wifi and ethernet work at the same time on

This is not a video on how to make your Internetspeed faster by combining your ethernet and your wifi .This video shows how you would configure your laptop so

How to make Ethernet and WiFi Work together (Windows)

Free audiobook with Amazon Audible TrialIN: https://amzn.to/2JqDrTg (affiliate links)US: https://amzn.to/2LSPHh1How to make Ethernet and WiFi Work together |

Should I use Wi-Fi and Ethernet at the same time? [duplicate]

It is possible to keep both systems on without any issue. Your device will automatically select one, ensuring everything runs smoothly. Additionally, you can prioritize one system over the other to ensure that your preferred system is utilized whenever it is accessible.

Ethernet has the potential to be faster than WiFi, especially in situations where multiple devices and access points are in close proximity, such as in apartments. This is because WiFi devices tend to slow down in such situations. If you require gigabit network speeds, Ethernet is generally the faster option, as achieving gigabit WiFi speeds usually requires being in close proximity to the access point.

AirDrop necessitates a Wi-Fi connection for establishing a direct connection between two devices. Apart from AirDrop, Ethernet offers superior speed and reduced interference, but there are no other reasons to favor one over the other.

Should I use Wi-Fi and Ethernet at the same time?, All things being equal Ethernet is sometimes faster due to WiFi devices slowing down when lots of devices and access points are close together (like in apartments). If you need gigabit network speeds then Ethernet will usually be faster as you generally need to be close to your access point for gigabit WiFi …

Connecting to wifi and ethernet at the same time

There seems to be an IP addressing conflict as both subnets appear to be identical, specifically 192.168.1.0/24. It is necessary to assign a distinct subnet to one of the two networks.

Connecting to wifi and ethernet at the same time, I have a setup pihole to run on my Raspberry PI with the below network setup. Wifi — Connected to Guest Network (Static IP: 192.168.1.56) Ethernet — Connected to Main Network (Static IP: 192.168.1.55) But when ethernet and wifi are connected at the same time my wifi’s IP 192.168.1.56, is not …

Using a wi-fi and an ethernet connection at the same time thus having more bandwidth?

Despite the fact that multi-homing on iOS 7 permits traffic to be sent over both LTE and WiFi networks simultaneously, there is no effective method of achieving this on OS X Mavericks and earlier versions.

Link Aggregation has been a part of the Mac OS since version 10.4 and proves to be beneficial when using a gigabit switch. A switch that supports LACP and two physical ethernet ports, as commonly found in G4 and G5 PowerMacs and MacPro models, is required. Compatibility with the ethernet switch and the necessary hardware are the only requirements as the OS X network stack includes this feature.

The absence of two ethernet ports on Mac OS X prevents the display of LACP as an available option. Additionally, I am not aware of any switches that support LACP over wireless or enable the combination of wired and wireless interfaces. While it may be possible to deceive the OS in some way, without the cooperation of the switch, rewriting LACP on the switch is essential for it to function correctly.

Modifying your routing table makes it simpler to separate particular traffic through specific interfaces. This enables you to transfer some traffic through wifi while sending others through the wire.

To prioritize one ISP over the other for specific applications like Netflix, you can set up a route to their network and prefer one gateway IP. However, it is not practical to instruct an application to use only one interface because it requires custom coding. Instead, local routing tables or those on the router can be utilized to direct certain traffic to a preferred gateway. Advanced routers offer quality of service options where you can assign a priority metric such as VOIP or video conference traffic to ensure optimal network performance. During times of network congestion, non-critical traffic can be steered to a different route to maintain fast network speeds for better responses.

Running these routers is an expensive affair, as the hardware alone costs around $3k US. On top of that, the cost for training and obtaining software licenses for the routers is triple that amount.

In order to choose a default route, you must select one interface as your default gateway since only one is allowed. Adding static routes for particular IP networks may result in traffic being directed out of the other interface for those networks, but it can become burdensome to maintain. It’s important to note that the same route/ISP used to send out traffic will also be the one that return traffic comes back on.

Combining both ISPs to increase your bandwidth is not possible on your client computer unless you have dynamic routing software installed. However, a proper hardware router is designed for this task, not your machine.

Possible to have both Wi-Fi and Ethernet connected to, I am running Arch Linux (on a Raspberry Pi 3) and tried to connect both the Ethernet and the Wi-Fi to the same network. route shows me the following: $ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default gateway 0.0.0.0 UG 1024 0 0 eth0 default gateway …

Источник