Can to wifi converter

1. Overview

The GCAN-211 is a converter that integrates two CAN interfaces, one Ethernet interface and one WiFi interface. With GCAN-211, users can connect CAN-Bus networks and WiFi to extend the range of CAN-Bus applications.

2. Properties at a glance

Power supply: 9~30V(50mA，24V DC)

Working temperature range from -40 to 85 °C

CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS 11898
standards

CAN baud rates range from 5Kbps to 1Mbps

CAN-Bus interface with electrical isolation

CAN-Bus isolation module insulation voltage: DC 1500V

Standard Ethernet interface: RJ45, supports 10 / 100M adaptive

The working port, the target IP and the target port can be modified

Support agreement: ETHERNET, ARP, IP, ICMP, UDP, DHCP, DNS, TCP

Compatible with SOCKET work (TCP Server, TCP Client, UDP)

2.4G WLAN interface, in line with IEEE802.11a / b / g standard

Size:(L)118mm * (W)94mm * (H)23mm(size without antenna)

3. converter used

GCAN-211 converter uses a network cable to connect to PC, uses +9 ~ 30V DC power supply(recommended + 12V or + 24V power supply), uses the «GCAN-211 Config» software to configure.

3.1 Restore the factory settings

GCAN-211 WiFi default IP: 192.168.1.11,If the user has modified the IP and forget it. By pressing the reset button, you can restore the factory settings. After GCAN-211 is powered on, you can find the reset button as shown above. Then press the button for about 5-6 seconds. When the indicator flashes, the system is restored successfully.
Please note: PC and GCAN-202 must be in the same network segment.

3.2 The structure of CAN-Bus

This is CAN-Bus connection, as Figure below.
Topology structure of CAN-bus

3.3 Termination resistor

CAN-Bus requires two 120Ω termination resistors in the furthest of the two terminals, as Figure below.
GCAN-204 connection to other CAN converter Please note: you should connect the two ends of the resistor to CAN_L and CAN_H respectively.

3.4 Indicator light

GCAN-211 converter has one PWR indicator, one SYS indicator, one LAN indicator, two CAN indicator, to indicate the converter status. More functions are shown in zhe following table.
Status of the GCAN-202 indicator

4. Technical s pecifications

Power supply: 9~30V(50mA，24V DC)

Working temperature range from -40 to 85 °C

CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS 11898
standards

CAN baud rates range from 5Kbps to 1Mbps

CAN-Bus interface with electrical isolation

CAN-Bus isolation module insulation voltage: DC 1500V

Standard Ethernet interface: RJ45, supports 10 / 100M adaptive

The working port, the target IP and the target port can be modified

Support agreement: ETHERNET, ARP, IP, ICMP, UDP, DHCP, DNS, TCP

Compatible with SOCKET work (TCP Server, TCP Client, UDP)

2.4G WLAN interface, in line with IEEE802.11a / b / g standard

If you have technical problems, please contact us by email. We will reply to you within 24 hours after receiving the mail.

GCAN-211(WiFi-CAN) converter
User Manual(Click to view)

Please ask for more information to the Engineer.

Источник

Can to wifi converter

• 

CAN to WiFi

Part No.: MPADFW-CAN-to-WiFi
This series of products allows to integrate a CAN network with a WiFi net.

Product Description

CAN / WiFi — Converter

This series of products allows to integrate a CAN network with a WiFi net.

The HD67644-WiFi is a CAN / WiFi Converter and it allows you to connect some CAN devices with a WiFi net (for example a PC, Supervisory System. ) in order to exchange the informations between the networks.

The order code is HD67644-WiFi-B2.

HD67644-WiFi-B2

CAN / WiFi — Converter ( Housing type: B, Terminal Blocks Connectors )

Accessories

Order Code	Description
AC34011	Isolated Converter 100..240V AC to 12V DC stabilized — AC/DC
AC34012	Isolated Converter 100..240V AC to 24V DC stabilized — AC/DC
AC34131	Patch Cross Cable Cat6 2 Meters

Microport Computer Electronics Inc.

Источник

CAN Converters: CAN COM, USB, Ethernet, and Wifi Solutions

ICP DAS CAN converters are used to establish a physical coupling of two or more communication interface, and are infrastructure components with which complex network structures can be implemented. They can be used to implement the data conversion between CAN and COM, USB or Ethernet interface. For example, the I-7530 series devices are high speed or low speed/fault-tolerance CAN bus to RS-232, RS-485 and RS-422 interface converters. The I-7540 series devices are high speed CAN bus to Ethernet or Wi-Fi interface converters. And the I-7565 series devices are high speed CAN bus to USB interface converters. By selecting the necessary CAN converters, user can control and integrate the data exchange and transmission between multi-interfaces easily.

A telematics and vehicle control system needs to be closely integrated with each other by implementing data exchange interface. LSFT (Low Speed/Fault Tolerance) CAN is a familiar type of interface in the application of automotive electronics systems. The I-7530-FT is specially designed for solving the problem of interface transformation between LSFT CAN and RS-232. In this way, the armor cash carrier manufacturer can efficiently control the door of the cash vault and directly monitor the status of the rear access vehicle door on the telematics.

The pick-up truck and gyroscope and automatically send data to CAN and RS-232 bus. And the I-7540D will bypass these data to the PC side. Then the PC can collect, analyze , extract and filter those data, like “vehicle speed”, “engine speed”, “fuel expenditure speed”, “inlet-air pressure”, “intake manifold pressure” and the gyroscope trajectory and extract. Then the necessary data can be saved into database for future used.

The I-7540D-WF can be used on ABS (Anti-Lock Brake System) /ESP (Electronic Stability Program) and Train-aided radar system. The mobile device, like iPad/ iPhone(iOS) and devices that support Android OS, can connect with the I-7540D-WF and convert the necessary data from Wi-Fi signal to CAN signal .Then sending these data to the ABS/ESP system or Train-aided radar system for data update.

Источник

CAN to WiFi converter module from Axiomatic

Designed for wireless connectivity to a vehicle CANbus.

Axiomatic Technologies Corp. has introduced a rugged, adaptable CAN to WiFi converter for secure and reliable wireless connectivity to a vehicle CANbus.

The AX141200 CAN to WiFi converter is used for wireless CANbus monitoring in off-highway, mining, industrial machines and control systems. It offers remote bi-directional CANbus accessibility over a wireless link, and acts as a wireless bridge, said the company.

The module has one CAN port for a high data transfer rate and with a configurable baud rate. It is a rugged controller with an integrated TE Deutsch 8-pin connector and an IP67 protection rating. The converter is powered from a 12 V or 24 Vdc battery. It has a status LED indicator.

CAN frames are converted into UDP or TCP IP datagrams, and vice versa, sending them over a wireless network using a WiFi protocol. The AX141200 Wi-Fi connection is provided by an internal antenna. The WiFi port can work in a station or access point mode in 2.4GHz or 5GHz frequency range.

Based in Mississauga, Ontario, Canada, Axiomatic engineers and manufactures a wide range of rugged electronics for machines which interfaces to provide end-users and OEMs with a solution to integrate legacy or standard systems.

The company said its controls feature compliance for harsh machine environments with surges, load dump, power transients as well as exposure to dust, water, high humidity and vibrations.

Источник

Wifi Can Bus Can To Wifi Converter 2.4g Wlan Interface

Product DescriptionIntroduction
The GCAN-211 is a CAN Bus converter, used for WiFi and CAN Bus connection. It is a high-performance CAN Bus converter, whose function is to realize interconnection easier and extends the application scope of CAN Bus.
Hardware Features
1. High speed 32-bit industrial grade processor
2. Embedded Watchdog timer
3. FLASH storage, can store parameters
4. External voltage (DC+9~30V), recommend voltage12V/24V
5. Current: 80mA, 24V DC
6. Electrostatic discharge (ESD) Immunity level: Contact Discharge±2KV, Air Discharge±15KV
7. Fast transient Burst Impedance Level: ±1KV
8. Surge immunity level: ±1KV
9. Working temperature: -40.00℃~ 85.00℃
10. Working humidity: 5%~95%, no condensation
11. Dimensions: 118mm (L) * 93mm (W) * 23mm (H)
CAN Features
1. Integrate two CAN-Bus channels, with terminal connection
2. Support CAN2.0A and CAN2.0B, conform to ISO/DIS11898
3. Support communication baud rate: 5Kbps~1Mbps
4. Electric isolation, insulation level: DC 1500V
5. 32 FIFO receiving buffers, maximum flow: 8000 FPS
Ethernet Features
1. Restore the network connection automatically after disconnecting, can establish a TCP connection.
2. SOCKET working mode compatibility (TCP Server, TCP Client, UDP, etc), program communication software according to standard SOCKET rules
3. Support protocol: Ethernet, ARP, IP, ICMP, UDP, DHCP, DNS, TCP
4. Support secondary development, we can provide VB routine
WiFi Features
1. Integrate 2.4G WLAN interface, conform standard IEEE802.11a/b/g
2. Support AP and Station mode
Detailed ImagesRelated ProductsCertificationsOur CompanyShenyang Guangcheng Technology CO., LTD

It is national certified high-tech enterprise. Our company has more 20 own intellectual-property rights with all of main products developed by ourselves, which is a leading supplier and service provider of industrial interconnection industry in China. We major in development, production, sales of industrial communication equipments and automatic equipments. The products cover CAN-Bus analyzer, ECU downloader, industrial gateway, remote IO, PLC core-board, and servo driver, software and hardware of industrial communication and providing for comprehensive solution. Since founded in 2010, our company has been on a mission to “promote the progress of industrial interconnection technique, offer competitive product and service”. We always create value for our customers. Now, we have served over 10 billion customers, involving traffic, electric power, energy, medical apparatus, ship, military industry, and automatic, multiple industries.
Our Service
1. Service: 1 years guarantee, and professional technical staff help.
2. Supply ability: We usually have 300-500 units in stock for urgent orders.
3. Capacity: 500/month, can meet the demand of most enterprises application.
4. Lifetime: At least 5 years for each device, can still produce just if you need.
5. Cooperation: Welcome the cooperation with distributors all over the world.
Packing & Delivery

Packing
1. Standard package. Carton
2. Customized designDelivery Time
2~5 days after receipt of your payment
FAQ
1.How to make sure the quality?
A. Process Quality Control
B. Final Quality Control
C. Outgoing Quality Control
2. How to get the order?
First,Tell us the model and quantity of the products you want.
Second ,we will make a PI for you.
Third, After confirm everything,the payment will be arranged (Paypal, Western Union,T/T or Ali Trade Assurance for your money safety are welcomed)
Fourth, we will send you the goods within the promissory time.
3. What’s the delivery time?
A. Sample within 2-5days;
B. Wholesales 4-7days according different quantities;
C. OEM 7-14 days after all info /confirm/ied.
D. ODM depends on the detail requirements.
4. Can you do the design for us?
Yes, Just tell us your idea (logo,text., etc) and our professional R&D team will help to carry out your ideas into reality.
Your any requests would be much appreciated, so DO NOT hesitate to contact us

Источник