Canon lide 120 драйвер linux

Canon lide 120 драйвер linux

Не получается заставить работать сканер canon lide 120. Сам сканер в системе виден
sane-find-scanner
found USB scanner (vendor=0x04a9 [Canon], product=0x190e [CanoScan], chip=GL848+) at libusb:001:024

scanimage -L
device `genesys:libusb:001:024′ is a Canon LiDE 120 flatbed scanner

Пробую сканировать с помощью Simple Scan 3.20.0. Программа в настройках сканер видит, но в результате сканирования выдает черный лист А4, хоть в сканере белый лист с текстом.

Кому-то помогало сканирование из терминала, но в моем случае опять прямоугольник малевича.
scanimage -d genesys:libusb:001:024 > /tmp/image.pnm

Пробовал сканировать с помощью xsane, вроде тоже некоторым людям это помогло. Но у меня опять прямоугольник малевича получился. Посмотрел в настройках xsane, сканер тоже виден.

Нагуглил, что некоторым людям помогает двиганье ползунков яркости, но у меня это никак не повлияло на результат.

В итоге помогло компилирование sane из исходников по этой инструкции https://help.ubuntu.com/community/CompileSaneFromSource
Теперь сканер работает в Simple Scan и в xsane

System: Host: imperio-msi-mint Kernel: 4.13.0-36-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: MATE 1.18.0 (Gtk 3.18.9-1ubuntu3.3) Distro: Linux Mint 18.3 Sylvia
Machine: System: Micro-Star product: PE70 6QE v: REV:1.0
Mobo: Micro-Star model: MS-1795 v: REV:0.A Bios: American Megatrends v: E1795IMS.11D date: 01/19/2018
CPU: Quad core Intel Core i7-6700HQ (-HT-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 20736
clock speeds: max: 3500 MHz 1: 2600 MHz 2: 2600 MHz 3: 2600 MHz 4: 2600 MHz 5: 2600 MHz 6: 2600 MHz
7: 2600 MHz 8: 2600 MHz
Graphics: Card-1: Intel Skylake Integrated Graphics bus-ID: 00:02.0
Card-2: NVIDIA GM107M [GeForce GTX 960M] bus-ID: 01:00.0
Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1368×768@60.00hz, 1600×900@60.00hz
GLX Renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2)
GLX Version: 3.0 Mesa 17.2.8 Direct Rendering: Yes
Audio: Card Intel Sunrise Point-H HD Audio driver: snd_hda_intel bus-ID: 00:1f.3
Sound: Advanced Linux Sound Architecture v: k4.13.0-36-generic
Network: Card-1: Intel Wireless 3165 driver: iwlwifi bus-ID: 02:00.0
IF: wlp2s0 state: up mac:
Card-2: Qualcomm Atheros AR8161 Gigabit Ethernet driver: alx port: d000 bus-ID: 03:00.0
IF: enp3s0 state: down mac:
Drives: HDD Total Size: 1480.3GB (21.0% used) ID-1: /dev/sda model: HGST_HTS721010A9 size: 1000.2GB temp: 33C
ID-2: /dev/sdb model: SPCC_Solid_State size: 480.1GB temp: 35C
Partition: ID-1: / size: 30G used: 12G (44%) fs: ext4 dev: /dev/sdb1
ID-2: /home size: 407G used: 22G (6%) fs: ext4 dev: /dev/sdb6
ID-3: swap-1 size: 4.09GB used: 0.00GB (0%) fs: swap dev: /dev/sdb5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 58.5C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 300 Uptime: 6 days Memory: 9097.0/15924.5MB Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35

Читайте также:  Linux professional institute linux essentials

Изображение

https://linux-hardware.org/?probe=a94b76ed20

Источник

Linux Mint Forums

Forum rules
Before you post please read how to get help. Topics in this forum are automatically closed 6 months after creation.

Alvin Level 5
Posts: 622 Joined: Wed Feb 13, 2019 8:33 am Location: Florida Contact:

Driver needed for Canon Lide 120 Scanner

Post by Alvin » Fri Mar 15, 2019 3:58 pm

A driver is needed so that I may use my Canon Lide 120 scanner with my Linux 19.1 Mint cinnamon system.

I do not wish to use the provided «Simple scan». It works but is does not allow operation from the buttons on the scanner. Also, it produced a copy with a grey background rather than paper-whiite. Lastly, it is an indirect method, requiring the use of Office Writer to obtain a printed copy from a pdf.

Is there a driver available to make full use of my scanner with Linux Mint? Your attention is appreciated.

Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.

Tomgin5 Level 6
Posts: 1029 Joined: Sat Mar 19, 2016 2:37 pm Location: Beaverton, Oregon USA

Re: Driver needed for Canon Lide 120 Scanner

Post by Tomgin5 » Sat Mar 16, 2019 7:51 pm

Strange I do not have any problem with my Lide 20 or Lide 210 with simple scan on wither 18.3 or 19.1 Cinnamon.

Alvin Level 5
Posts: 622 Joined: Wed Feb 13, 2019 8:33 am Location: Florida Contact:

Re: Driver needed for Canon Lide 120 Scanner

Post by Alvin » Sun Mar 17, 2019 1:33 pm

Tomgin5: Not strange at all! You do not specify how you are using your scanner. I want to use mine as I do in Windows7. There, I run the scan from the buttons on the scanner, any one of them. I do not have to create a PDF file in order to make a printed copy. I just turn on my printer and press the copy button on the scanner. I have to make a PDF with simple scan, then use an editor to send it to the printer. I find that unsatisfactory. Maybe, you are more easily satisfied.

Читайте также:  Единое пространство пользователей astra linux

ClixTrix Level 6
Posts: 1069 Joined: Wed Dec 09, 2015 11:40 am Location: Columbus, Ohio, USA

Re: Driver needed for Canon Lide 120 Scanner

Post by ClixTrix » Sun Mar 17, 2019 4:01 pm

Alvin wrote: ⤴ Fri Mar 15, 2019 3:58 pm A driver is needed so that I may use my Canon Lide 120 scanner with my Linux 19.1 Mint cinnamon system.

I do not wish to use the provided «Simple scan». It works but is does not allow operation from the buttons on the scanner. Also, it produced a copy with a grey background rather than paper-whiite. Lastly, it is an indirect method, requiring the use of Office Writer to obtain a printed copy from a pdf.

Is there a driver available to make full use of my scanner with Linux Mint? Your attention is appreciated.

I had an old Canon Canoscan similar to your model. I understand what you want to do, i.e. push the Copy button and have the system automatically scan and print the results. I don’t think Canon supplies software to support this feature in Linux. However.

If I recall, there is a package which installs a daemon to monitor and act on the scanner buttons. I looked in Software Manager and the current package is Scanbd (older package is Scanbuttond which is what I remembered). I believe the package allows trigger of scripts for COPY-PRINT. Not much in the Forum on that package, but there may be some tips over at Ubuntu.

Linux Mint 19.2 x64 Cinnamon 4.15.0-118-generic
Gigabyte GA-AB350M-D3H (F20) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 2x8GB / Sapphire Radeon HD6450
NVMe-SSD: Samsung 960 EVO 250GB / SATA-SSD: Samsung 850 EVO 250GB + Toshiba OCZ VX500 512GB

Alvin Level 5
Posts: 622 Joined: Wed Feb 13, 2019 8:33 am Location: Florida Contact:

Читайте также:  Установить драйвер вай фай линукс

Re: Driver needed for Canon Lide 120 Scanner

Post by Alvin » Sun Mar 17, 2019 4:49 pm

Clix Trix: Thanks for a suggestion in the right direction. I have decided simply to keep my dual OS with Windows 7 and Linux Mint. When I boot Windows 7 in 2020, I shall simply disconnect from the internet and use it for local purposes, such as copying. That seems easier than searching for packages. I have plenty of hard drive space for both systems.

There are other programs easier to use on Windows 7 than to recreate on Mint. I do my system image backups using Windows Macrium Free on a recovery boot disc, for example. I think I shall manage well until my motherboard gives out. Desktop PCs are now so expensive that in the future, I may do without one. My tablet will keep me connected.

Heraclitus. long ago, observed that everything changes: never do we put our toes into the same river twice.

  • Important Notices
  • ↳ Rules & Notices
  • ↳ Releases & Announcements
  • ↳ Main Edition Support
  • ↳ Beginner Questions
  • ↳ Installation & Boot
  • ↳ Software & Applications
  • ↳ Hardware Support
  • ↳ Graphics Cards & Monitors
  • ↳ Printers & Scanners
  • ↳ Storage
  • ↳ Sound
  • ↳ Networking
  • ↳ Virtual Machines
  • ↳ Desktop & Window Managers
  • ↳ Cinnamon
  • ↳ MATE
  • ↳ Xfce
  • ↳ Other topics
  • ↳ Non-technical Questions
  • ↳ Tutorials
  • Debian Edition Support
  • ↳ LMDE Forums
  • ↳ Beginner Questions
  • ↳ Installation & Boot
  • ↳ Software & Applications
  • ↳ Hardware Support
  • ↳ Networking
  • ↳ Tutorials
  • ↳ Other Topics & Open Discussion
  • ↳ LMDE Archive
  • Interests
  • ↳ Gaming
  • ↳ Scripts & Bash
  • ↳ Programming & Development
  • Customization
  • ↳ Themes, Icons & Wallpaper
  • ↳ Compiz, Conky, Docks & Widgets
  • ↳ Screenshots
  • ↳ Your Artwork
  • Chat
  • ↳ Introduce Yourself
  • ↳ Chat about Linux Mint
  • ↳ Chat about Linux
  • ↳ Open Chat
  • ↳ Suggestions & Feedback
  • International
  • ↳ Translations
  • ↳ Deutsch — German
  • ↳ Español — Spanish
  • ↳ Français — French
  • ↳ Italiano — Italian
  • ↳ Nederlands — Dutch
  • ↳ Português — Portuguese
  • ↳ Русский — Russian
  • ↳ Suomi — Finnish
  • ↳ Other Languages
  • ↳ Čeština-Slovenčina — Czech-Slovak
  • ↳ Magyar — Hungarian
  • ↳ 日本語 — Japanese
  • ↳ Polski — Polish
  • ↳ Svenska — Swedish
  • ↳ Українська — Ukrainian

Powered by phpBB® Forum Software © phpBB Limited

Источник

Оцените статью
Adblock
detector