4 Tools to Manage EXT2, EXT3 and EXT4 Health in Linux
A filesystem is a data structure that helps to control how data is stored and retrieved on a computer system. A filesystem can also be considered as a physical (or extended) partition on a disk. If not well maintained and regularly monitored, it can become damaged or corrupted in the long run, in so many different ways.
There are several factors that can cause a filesystem to become unhealthy: system crashes, hardware or software malfunctions, buggy drivers and programs, tuning it incorrectly, overloading it with excessive data plus other minor glitches.
Any of these issues can cause the Linux not to mount (or unmount) a filesystem gracefully, thus bringing about system failure.
In addition, running your system with an impaired filesystem may give rise to other runtime errors in operating system components or in user applications, which could escalate to severe data loss. To avoid suffering filesystem corruption or damage, you need to keep an eye on its health.
In this article, we will cover tools to monitor and maintain a ext2, ext3 and ext4 filesystems health. All the tools described here require root user privileges, therefore use the sudo command to run them.
How to View EXT2/EXT3/EXT4 Filesystem Information
dumpe2fs is a command line tool used to dump ext2/ext3/ext4 filesystem information, mean it displays super block and blocks group information for the filesystem on device.
Before running dumpe2fs, make sure to run df -hT command to know the filesystem device names.
Sample Output
dumpe2fs 1.42.13 (17-May-2015) Filesystem volume name: Last mounted on: / Filesystem UUID: bb29dda3-bdaa-4b39-86cf-4a6dc9634a1b Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: user_xattr acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 21544960 Block count: 86154752 Reserved block count: 4307737 Free blocks: 22387732 Free inodes: 21026406 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 1003 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 Flex block group size: 16 Filesystem created: Sun Jul 31 16:19:36 2016 Last mount time: Mon Nov 6 10:25:28 2017 Last write time: Mon Nov 6 10:25:19 2017 Mount count: 432 Maximum mount count: -1 Last checked: Sun Jul 31 16:19:36 2016 Check interval: 0 () Lifetime writes: 2834 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 6947324 Default directory hash: half_md4 Directory Hash Seed: 9da5dafb-bded-494d-ba7f-5c0ff3d9b805 Journal backup: inode blocks Journal features: journal_incompat_revoke Journal size: 128M Journal length: 32768 Journal sequence: 0x00580f0c Journal start: 12055
You can pass the -b flag to display any blocks reserved as bad in the filesystem (no output implies to badblocks):
Checking EXT2/EXT3/EXT4 Filesystems For Errors
e2fsck is used to examine ext2/ext3/ext4 filesystems for errors and fsck checks and can optionally repair a Linux filesystem; it is basically a front-end for a range of filesystem checkers (fsck.fstype for example fsck.ext3, fsck.sfx etc) offered under Linux.
Remember that Linux runs e2fack/fsck automatically at system boot on partitions that are labeled for checking in /etc/fstab configuration file. This is normally done after a filesystem has not been unmounted cleanly.
Attention: Do not run e2fsck or fsck on mounted filesystems, always unmount a partition first before you can run these tools on it, as shown below.
$ sudo unmount /dev/sda10 $ sudo fsck /dev/sda10
Alternatively, enable verbose output with the -V switch and use the -t to specify a filesystem type like this:
$ sudo fsck -Vt ext4 /dev/sda10
Tuning EXT2/EXT3/EXT4 Filesystems
We mentioned from the start that one of the causes of filesystem damage is incorrect tuning. You can use the tune2fs utility to change the tunable parameters of ext2/ext3/ext4 filesystems as explained below.
To see the contents of the filesystem superblock, including the current values of the parameters, use the -l option as shown.
Sample Output
tune2fs 1.42.13 (17-May-2015) Filesystem volume name: Last mounted on: / Filesystem UUID: bb29dda3-bdaa-4b39-86cf-4a6dc9634a1b Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: user_xattr acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 21544960 Block count: 86154752 Reserved block count: 4307737 Free blocks: 22387732 Free inodes: 21026406 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 1003 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 Flex block group size: 16 Filesystem created: Sun Jul 31 16:19:36 2016 Last mount time: Mon Nov 6 10:25:28 2017 Last write time: Mon Nov 6 10:25:19 2017 Mount count: 432 Maximum mount count: -1 Last checked: Sun Jul 31 16:19:36 2016 Check interval: 0 () Lifetime writes: 2834 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 6947324 Default directory hash: half_md4 Directory Hash Seed: 9da5dafb-bded-494d-ba7f-5c0ff3d9b805 Journal backup: inode blocks
Next, using the -c flag, you can set the number of mounts after which the filesystem will be checked by e2fsck. This command instructs the system to run e2fsck against /dev/sda10 after every 4 mounts.
$ sudo tune2fs -c 4 /dev/sda10 tune2fs 1.42.13 (17-May-2015) Setting maximal mount count to 4
You can as well define the time between two filesystem checks with the -i option. The following command sets an interval of 2 days between filesystem checks.
$ sudo tune2fs -i 2d /dev/sda10 tune2fs 1.42.13 (17-May-2015) Setting interval between checks to 172800 seconds
Now if you run this command below, the filesystem check interval for /dev/sda10 is now set.
Sample Output
Filesystem created: Sun Jul 31 16:19:36 2016 Last mount time: Mon Nov 6 10:25:28 2017 Last write time: Mon Nov 6 13:49:50 2017 Mount count: 432 Maximum mount count: 4 Last checked: Sun Jul 31 16:19:36 2016 Check interval: 172800 (2 days) Next check after: Tue Aug 2 16:19:36 2016 Lifetime writes: 2834 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 6947324 Default directory hash: half_md4 Directory Hash Seed: 9da5dafb-bded-494d-ba7f-5c0ff3d9b805 Journal backup: inode blocks
To change the default journaling parameters, use the -J option. This option also has sub-options: size=journal-size (sets the journal’s size), device=external-journal (specifies the device on which it’s stored) and location=journal-location (defines the location of the journal).
Note that only one of the size or device options can be set for a filesystem:
$ sudo tune2fs -J size=4MB /dev/sda10
Last but not least, the volume label of a filesystem can be set using the -L option as below.
$ sudo tune2fs -L "ROOT" /dev/sda10
Debug EXT2/EXT3/EXT4 Filesystems
debugfs is an simple, interactive command line based ext2/ext3/ext4 filesystems debugger. It allows you to modify filesystem parameters interactively. To view sub-commands or requests, type «?» .
By default, the filesystem should be opened in read-write mode, use the -w flag to open it in read-write mode. To open it in catastrophic mode, use the -c option.
Sample Output
debugfs 1.42.13 (17-May-2015) debugfs: ? Available debugfs requests: show_debugfs_params, params Show debugfs parameters open_filesys, open Open a filesystem close_filesys, close Close the filesystem freefrag, e2freefrag Report free space fragmentation feature, features Set/print superblock features dirty_filesys, dirty Mark the filesystem as dirty init_filesys Initialize a filesystem (DESTROYS DATA) show_super_stats, stats Show superblock statistics ncheck Do inode->name translation icheck Do block->inode translation change_root_directory, chroot .
To show free space fragmentation, use the freefrag request, like so.
debugfs: freefrag
Sample Output
Device: /dev/sda10 Blocksize: 4096 bytes Total blocks: 86154752 Free blocks: 22387732 (26.0%) Min. free extent: 4 KB Max. free extent: 2064256 KB Avg. free extent: 2664 KB Num. free extent: 33625 HISTOGRAM OF FREE EXTENT SIZES: Extent Size Range : Free extents Free Blocks Percent 4K. 8K- : 4883 4883 0.02% 8K. 16K- : 4029 9357 0.04% 16K. 32K- : 3172 15824 0.07% 32K. 64K- : 2523 27916 0.12% 64K. 128K- : 2041 45142 0.20% 128K. 256K- : 2088 95442 0.43% 256K. 512K- : 2462 218526 0.98% 512K. 1024K- : 3175 571055 2.55% 1M. 2M- : 4551 1609188 7.19% 2M. 4M- : 2870 1942177 8.68% 4M. 8M- : 1065 1448374 6.47% 8M. 16M- : 364 891633 3.98% 16M. 32M- : 194 984448 4.40% 32M. 64M- : 86 873181 3.90% 64M. 128M- : 77 1733629 7.74% 128M. 256M- : 11 490445 2.19% 256M. 512M- : 10 889448 3.97% 512M. 1024M- : 2 343904 1.54% 1G. 2G- : 22 10217801 45.64% debugfs:
You can explore so many other requests such as creating or removing files or directories, changing the current working directory and much more, by simply reading the brief description provided. To quit debugfs, use the q request.
That’s all for now! We have a collection of related articles under different categories below, which you will find useful.
Filesystem Usage Information:
Check Disk or Partition Health:
Maintaining a healthy filesystem always improves the overall performance of your Linux system. If you have any questions or additional thoughts to share use the comment form below.