Check users group in linux

How to Know The Groups of a Linux User

This quick tip teaches you how to find the groups a Linux user belongs to in Linux command line.

Groups are the essential part of basic Linux filesystem security by design. If you know about the file permissions in Linux, you already know that groups play a huge role in limiting and allowing access of files to the desired users only.

The idea is to collect users in a group based on their roles. This way, you can easily set permissions for the intended groups of user. For example, users in sudo groups can run commands with superuser privileges while other users cannot.

Now that might make you curious about knowing which groups you belong to and this is exactly what I am going to show you in this quick tutorial.

Check user group in Linux command line

To find out which groups your user account belongs to, simply use this command:

This will show all the groups you belong to.

[email protected]:~$ groups abhishek adm cdrom sudo dip plugdev lpadmin sambashare kvm

As you can see, the user abhishek belongs to groups abhishek, sudo, adm and several other groups.

I am using Ubuntu in this tutorial and Ubuntu creates a group with the same name as the user. This is why you see user abhishek belonging to group abhishek.

Find out groups of other users in Linux

You just learned to see the groups you belong to. What about checking the groups of other users on your system?

You probably already know how to list users in Linux. When you know the username, you can find which group it belongs to by using the groups command in this way:

Obviously, you’ll have to replace the user_name in the above command with the name of the other user.

[email protected]:~$ groups prakash prakash : prakash sudo

You can also check groups of more than one users at a time by

groups user_1 user_2 user_3

The output will display the groups information for each user in separate rows:

[email protected]:~$ groups abhishek prakash abhishek adm cdrom sudo dip plugdev lpadmin sambashare kvm prakash : prakash sudo

Bonus Tip: Get group information along with gid

You can also get group information of a user with id command. The additional benefit of the id command is that it also displays the uid of the user and gid of the groups. Read this article to know more about UID in Linux.

The user name is optional and by default, it will show the information about your user account.

uid=1000(abhishek) gid=1000(abhishek) groups=1000(abhishek),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),116(lpadmin),126(sambashare),127(kvm)

You can see that getting the group information of a user is a simple task. It could come in handy in many situations and I would let you experience them on your own.

Bonus Tip 2: Get primary group of a user in Linux

Every user has a default or primary group. You can check the primary group of a user with id command in the following fashion:

You can change the primary and secondary group of a user with the usermod command.

I hope this quick little tip helped you to list user groups in Linux. You may also want to read about checking the members of a group in Linux.

If you have questions or suggestions, please feel free to use the comment section.

Источник

How to find out what group a given user has?

This appears to be pretty useful as well. It has more verbose output than the ‘groups’ command, so if you need the group id/user id use this!

On Linux/OS X/Unix to display the groups to which you (or the optionally specified user) belong, use:

which is equivalent to groups [user] utility which has been obsoleted on Unix.

On OS X/Unix, the command id -p [user] is suggested for normal interactive.

Explanation on the parameters:

-G , —groups — print all group IDs

-n , —name — print a name instead of a number, for -ugG

-p — Make the output human-readable.

or just study /etc/groups (ok this does probably not work if it uses pam with ldap)

Below is the script which is integrated into ansible and generating dashboard in CSV format.

sh collection.sh #!/bin/bash HOSTNAME=`hostname -s` for i in `cat /etc/passwd| grep -vE "nologin|shutd|hal|sync|root|false"|awk -F':' '' | sed 's/[[:space:]]/,/g'`; do groups $i; done|sed s/\:/\,/g|tr -d ' '|sed -e "s/^/$HOSTNAME,/"> /tmp/"$HOSTNAME"_inventory.txt sudo cat /etc/sudoers| grep -v "^#"|awk ''|grep -v Defaults|sed '/^$/d;s/[[:blank:]]//g'>/tmp/"$HOSTNAME"_sudo.txt paste -d , /tmp/"$HOSTNAME"_inventory.txt /tmp/"$HOSTNAME"_sudo.txt|sed 's/,[[:blank:]]*$//g' >/tmp/"$HOSTNAME"_inventory_users.txt 

My output stored in below text files.

cat /tmp/ANSIBLENODE_sudo.txt cat /tmp/ANSIBLENODE_inventory.txt cat /tmp/ANSIBLENODE_inventory_users.txt 

Источник

How can I find out which users are in a group within Linux?

I’ve recently been creating new users and assigning them to certain groups. I was wondering if there is a command that shows all the users assigned to a certain group? I have tried using the ‘groups’ command however whenever I use this it says ‘groups: not found’

That is the groups command. It is unlikely that you do not have it on Linux, since it is part of coreutils.

11 Answers 11

I prefer to use the getent command .

Since getent uses the same name service as the system, getent will show all information, including that gained from network information sources such as LDAP.

So for a group, you should use the following .

getent group name_of_group 

where name_of_group is replaced with the group you want to look up. Note that this only returns supplementary group memberships, it doesn’t include the users who have this group as their primary group.

There are a whole lot of other lookups that you can do . passwd being another useful one, which you’ll need to list primary groups.

The other answers doesn’t apply if you are not administrator and the group info is stored in other server.

This could be really confusing probably because of primary/secondary difference. I think this should be avoided in favor of sudo lid -g .I have a system where this answer lists 8 users in a group whereas sudo lid -g lists 10.

grep '^group_name_here:' /etc/group 

This only lists supplementary group memberships, not the user who have this group as their primary group. And it only finds local groups, not groups from a network service such as LDAP.

This could be really confusing probably because of primary/secondary difference. I think this should be avoided in favor of sudo lid -g .I have a system where this answer lists 8 users in a group whereas sudo lid -g lists 10.

This should NOT be the accepted answer. Modern Linux installations have multiple sources for user/group information — not just local /etc/passwd and /etc/group — e.g. nsswitch or sssd . Use getent passwd for user info & getent group for group information — this will cover all modern Linux configurations.

Easier to do groups [username]

If you want to list all local users and their local groups you can do

cat /etc/passwd | awk -F’:’ ‘< print $1>‘ | xargs -n1 groups

If you get «groups: command not found», it is likely you’ve edited your environmental path for the worse, to reset your path do PATH=$(getconf PATH)

It works for a particular group if | grep is added and gives the correct answer unlike getent group name_of_group or grep ‘^group_name_here:’ /etc/group

Instead of cat /etc/passwd , you should use gentent passwd so users in nis/ldap would still be listed. The only drawback is that it can take quite a while.

groupmems -g groupname -l

lists all users in the named group.

Note that groupmems is part of the shadow utils used on most Linux distros, however groupmems is currently absent from Debian and derivative (a bug now fixed but not included in any release yet (as of Nov 2016))

Also note that groupmems only deals with groups in /etc/group (not the ones in LDAP or other user database) and requires superuser privileges as it tries to open /etc/gshadow.

Despite the caveats mentioned above, this command is ideal for certain situations because it doesn’t require additional parsing of the output (i.e. cut and friends).

This could be really confusing probably because of primary/secondary difference. I think this should be avoided in favor of sudo lid -g . I have a system where this answer lists 8 users in a group whereas sudo lid -g lists 10.

groups command prints group memberships for a user. You can use lid command to list users in a group like:

Update: On Debian based distributions the command name differs as libuser-lid . Both commands are provided by libuser package as @chris-down mentioned.

$ sudo libuser-lid -g lpadmin kadir(uid=xxxx) 

What’s more, on Ubuntu 20.04 LTS, lid is part of the id-utils package. After installation it turned out that this lid does not support the -g option. I understand that Kadir answered 6 years ago, but maybe it’s time to update the information given here.

@LaryxDecidua id-utils manipulates id databases, it doesn’t work with files such as /etc/group or /etc/passwd . Its lid is not at all similar to libuser ’s.

I am surprised nobody mentioned

This command will give a list of groups the user is in.

Because — contrary to the title — the questioner wanted to know the users within a given group, not the groups of a given user, as detailed in the question. I now rephrased the title to match the contents.

Even though , is it different from the actual question, everyone will find this too as a useful information , I bet !

cut -d: -f1,4 /etc/passwd | grep $(getent group | cut -d: -f3) | cut -d: -f1 

I disagree. Because it reads users in /etc/passwd, this will not work with other nsswitch modules that access LDAP etc.

Didn’t work correctly for me: I got 4 members in a group whereas sudo lid -g lists 8. @Bhavik The accepted answer is not correct either.

Works nicely, especially if cut -d: -f1,4 /etc/passwd is replaced with getent passwd | cut -d: -f1,4 . As many people have pointed it out, getent will query non-local information sources.

Some will tell you to install libuser (for ‘lid’) or members (for ‘members’). But building upon the answer https://unix.stackexchange.com/a/349648/77959 which handled this issue with login group membership I found another group not being covered by that script. So — here’s the best of both approaches combined:

#!/bin/bash if [ $# -eq 1 ]; then gid=`getent group "$1"|cut -d: -f3` list_a=`cut -d: -f1,4 /etc/passwd | grep ":$gid$" | cut -d: -f1` list_b=`getent group "$1"|cut -d: -f4|sed 's/,/\n/g'` echo -e "$list_a\n$list_b"|grep -v "^$"|sort|uniq else echo "pass me a group to find the members of" fi 

It worked correctly on my system unlike answers involving getent or grep ‘^group_name_here:’ /etc/group

OP phrased the question to exclude the possibility of using the groups command. Since that is part of coreutils on Linux, either (a) it was removed, or (b) OP is mistyping the name.

OP could have used groups like this, for instance:

for name in $(cut -d: -f1 /etc/passwd);do groups $name|grep -w sudo|awk '';done 

One suggested answer just grep’s for the group name in /etc/group . Sometimes that works as intended.

A slightly better use of grep takes into account the syntax of /etc/group :

group_name:password:GID:user_list 

so that only the part before the first colon is a valid group-name. A plain grep without regard to syntax can (and will) pick up misleading matches from the file. Use regular expressions to make the grep match exactly what is needed:

grep -E '^users:' /etc/group |sed -e 's/^.*://' 

or using a shell variable:

grep -E '^'$groupname':' /etc/group |sed -e 's/^.*://' 

However, that only lists those not in a default group. To add those, you need to take into account the password file, e.g., by extracting the group-id number from /etc/group , and printing the users whose default group matches from /etc/passwd , e.g.,

You could do the same thing using just grep and sed, but it is more work than using awk.

Another suggested answer proposed using getent , which also is likely to be on a Linux machine (with Debian, it is part of GNU libc). However a quick check of that shows it providing only the /etc/group content.

I (like most) do not have libusers or lid installed, so I cannot comment on whether it satisfies OP’s conditions.

There is also the id program, which gives group information. Someone might expand on that as a possible answer.

Источник