Versions this guide is based on:
Because IOL is an internal IOS version, IOL can be used by Cisco employees or by authorized customers only.
Upload the downloaded image to the EVE using for example FileZilla or WinSCP to: /opt/unetlab/addons/iol/bin/ .
Type following command to fix permissions:
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
IOL images must end with the “.bin” extension and must be executable. EVE-NG Pro has not required to generate iourc license.
License must be stored under the same path. IOU/IOL license is bound to the hostname and domain name of the server. A test should be made to check if IOU/IOL images can run properly.
Google for how to create iourc license file. Bellow is an EXAMPLE how it should look like:
cat /opt/unetlab/addons/iol/bin/iourc [license] unl01 = 0123456789abcdef;
Testing Cisco IOU/IOL Images:
cd /opt/unetlab/addons/iol/bin touch NETMAP LD_LIBRARY_PATH=/opt/unetlab/addons/iol/lib /opt/unetlab/addons/iol/bin/ 1 *************************************************************** IOS On Unix - Cisco Systems confidential, internal use only Under no circumstances is this software to be provided to any non Cisco staff or customers. To do so is likely to result in disciplinary action. Please refer to the IOU Usage policy at wwwin-iou.cisco.com for more information. *************************************************************** Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706
- EVE System Requirements
- Installation
- Virtual Machine Install
- Bare Install
- Google Cloud Install
- EVE-PRO/LC
- Configure EVE during first boot
- Backup EVE-NG content
- Re-install and re-host EVE-PRO
- A10 vThunder
- AlienVault Cybersecurity OSSIM
- Android Nodes
- Arista vEOS Switch
- Arista vEOS Router
- Aruba ClearPass
- Aruba CX Switch
- Aruba Mobility Controller
- CheckPoint
- Cyberoam Firewall
- Cisco ACS
- Cisco ASAv
- Cisco CSRv1000 (SD-WAN)
- Cisco CSRv1000 16.x, 17.x
- Cisco Catalyst 8000v
- Cisco Catalyst 9000v
- Cisco CUCM
- Cisco DCNM
- Cisco ND (Nexus Dashboard)
- Cisco Dynamips images (Cisco IOS)
- Cisco ESA (Email Security Appliance)
- Cisco Firepower 6 images
- Cisco Firepower 7 images
- Cisco IOL (IOS on Linux)
- Cisco ISE
- Cisco ISRv
- Cisco Nexus 9000v switch
- Cisco Prime Infra
- Cisco StealthWatch
- Cisco vIOS from CML
- Cisco SDWAN Viptela images set
- Cisco vWAAS
- Cisco Wireless C9800-CL
- Cisco vWLC (Virtual Wireless LAN Controller)
- Cisco WSA (Web Security Appliance)
- Cisco SMA Zeus
- Cisco XRv
- Cisco XRv 9000
- Citrix Netscaler
- Clavister Netwall cOS
- Cumulus VX
- Dell OS 10 Switch
- Extreme EXOS
- Extreme VOSS
- F5 BIGIP
- Fortinet images
- Forcepoint FW
- Forescout CounterACT FW
- Hewlett Packard VSR1000
- Hillstone Firewall
- Huawei AR1000v
- Huawei USG6000v
- Infoblox DDI
- Juniper Apstra AOS Server
- Juniper vJunos EX Switch
- Juniper vJunos EVO Router
- Juniper J-Space
- Juniper vMX
- Juniper vQFX
- Juniper VRR
- Juniper SDWAN 128T
- Juniper vSRX 3.0 Version 18.X and later
- Kemp Load Master
- Kerio Control FW
- Linux images
- Mikrotik Cloud router
- MS Windows Workstation
- MS Windows Server
- Nokia VSR Single node
- Nokia VSR Multi Line cards
- OPNsense Firewall
- Palo Alto
- Palo Panorama
- pfSense FW 2.4
- pfSense FW 2.5.2
- Plixer Scrutinizer Netflow
- Pulse Secure Connect
- Radware Alteon VA
- Riverbed SteelHead Virtual CX
- Silver Peak
- SonicWALL FW
- Sophos FW
- Stormshield FW UTM
- TrendMicro vTPS FW
- Versa Networks SD-WAN
- Watchguard FireboxV
- VM Ware ESXi
- VM ware NSX
- VM Ware vCenter
- VM Ware Velocloud SD-WAN
- VyOS Vyatta
- Zabbix Monitoring
- ZScaler Virtual Service Edge (vzen)
- CBT Nuggets Knox Videos
- Cisco CML images
- Commit changes on previously created Qemu image
- EVE embedded Dockers Setup and Usage
- Create customized windows image for EVE
- Designing EVE topology adding objects and text
- Designing EVE mapping nodes to custom topology
- Operate with EVE initial configurations
- Create lab and connect nodes in the EVE
- Expand HDD on EVE VM
- Use HTML5 and native console
- EVE WEB UI Interface functions and features
- Install local management Telnet, VNC and Wireshark for windows
- EVE-NG short presentation
- Template, icons and config scripts update from GIT
- EVE-PRO Upgrade from v4.x to v5.x
- EVE Pro v4 content migration to V5 (rsync)
- Upgrade EVE Professional or Learning Centre to the newest version
- Upgrade EVE Community to the newest version
- Enable SSL EVE PRO with Let’s Encrypt
- Enable SSL EVE Community with Let’s Encrypt
- Enable SSL EVE Community with Self-Sign
- Release Notes EVE (PE) Professional
- Release Notes EVE (CE) Community
EVE-NG hosting partners. Rent EVE server online.
Official partnership. Solution tested and approved by EVE-NG Ltd