Clover os gnu linux

Install Clover UEFI emulation environment from Linux

Clover EFI bootloader contains an UEFI emulation environment, which can be used on older systems without UEFI.

With Clover-Linux-installer, you can easily install Clover onto a GPT partitioned disk from Linux.

curl gzip p7zip p7zip-full or p7zip-plugins (depending on distribution) sudo

Use GParted or cgdisk to partition your hard disk.

Create a partition (about 200 MiB), set its type to «EFI System Partiton (0xef00)» and set on it a boot flag. Format it as FAT32.

Remember your disk device name (e.g. /dev/sdx) and your EFI System Partition device name (e.g. /dev/sdx9).

Connect to the Internet, because the installer will download the latest Clover as CloverV2.zip .

You do not have to switch to root user, but you must make «sudo» available.

Type ./install.sh , it might look like this:

Welcome to Clover-Linux-installer. Ensure your target disk has a GPT partition table. Create a FAT32 partition (about 200 MiB) and set it to "EFI System Partition" type. Type in your target disk device (e.g. /dev/sdx): /dev/sdx Type in your ESP partition device (e.g. /dev/sdx9): /dev/sdx9 You are about to install Clover on disk "/dev/sdx", partition "/dev/sdx9". Make sure you backed up your files before you continue, since the author of this installer program will not be responsible for any damage to your device or your files. Type "y" to continue, type Ctrl-C to quit: y Starting installation. . Installation finished successfully.

Or, installing on a disk image

gdisk multipath-tools (for kpartx)

Here is an example session:

# Allocate 512 MiB for your disk image fallocate -l 512M image.img # Alternatively you can use truncate -s 512M image.img # Partition the disk image gdisk image.img Command (? for help): n Partition number (1-128, default 1): 1 First sector (34-1048542, default = 2048) or size: 2048 Last sector (2048-1048542, default = 1048542) or size: +256M Hex code or GUID (L to show codes, Enter = 8300): ef00 Command (? for help): w Do you want to proceed? (Y/N): y # Attach the loopback device sudo losetup -f image.img losetup NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO /dev/loop9 0 0 0 0 image.img 0 sudo kpartx -av /dev/loop9 # If kpartx does not work, you can also try losetup with "-P". # Format the EFI System Partition sudo mkfs -t vfat -n EFI -F 32 /dev/mapper/loop9p1 # Install Clover ./install.sh Type in your target disk device (e.g. /dev/sdx): /dev/loop9 Type in your ESP partition device (e.g. /dev/sdx9): /dev/mapper/loop9p1 # Detach the loopback device sudo kpartx -dv /dev/loop9 sudo losetup -d /dev/loop9

For some buggy BIOS where BiosBlockIO is needed, search install.sh for BOOTFILE=boot6 and replace with BOOTFILE=boot7 .

Читайте также: Linux есть ли будущее

The original author of this program, clover-linux-installer, is StarBrilliant.

This program is released under General Public License version 3.

You should have received a copy of General Public License text alongside with this program. If not, you can obtain it at http://gnu.org/copyleft/gpl.html.

This program comes with no warranty, the author will not be resopnsible for any damage or problems caused by this program.

About

Install Clover UEFI emulation environment from Linux

License: GNU General Public License v3.0

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

Install Clover UEFI emulation environment from Linux

License

m13253/clover-linux-installer

This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Please sign in to use Codespaces.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

Readme.md

Install Clover UEFI emulation environment from Linux

Clover EFI bootloader contains an UEFI emulation environment, which can be used on older systems without UEFI.

With Clover-Linux-installer, you can easily install Clover onto a GPT partitioned disk from Linux.

curl gzip p7zip p7zip-full or p7zip-plugins (depending on distribution) sudo

Use GParted or cgdisk to partition your hard disk.

Create a partition (about 200 MiB), set its type to «EFI System Partiton (0xef00)» and set on it a boot flag. Format it as FAT32.

Remember your disk device name (e.g. /dev/sdx) and your EFI System Partition device name (e.g. /dev/sdx9).

Connect to the Internet, because the installer will download the latest Clover as CloverV2.zip .

You do not have to switch to root user, but you must make «sudo» available.

Type ./install.sh , it might look like this:

Welcome to Clover-Linux-installer. Ensure your target disk has a GPT partition table. Create a FAT32 partition (about 200 MiB) and set it to "EFI System Partition" type. Type in your target disk device (e.g. /dev/sdx): /dev/sdx Type in your ESP partition device (e.g. /dev/sdx9): /dev/sdx9 You are about to install Clover on disk "/dev/sdx", partition "/dev/sdx9". Make sure you backed up your files before you continue, since the author of this installer program will not be responsible for any damage to your device or your files. Type "y" to continue, type Ctrl-C to quit: y Starting installation. . Installation finished successfully.

Or, installing on a disk image

gdisk multipath-tools (for kpartx)

Here is an example session:

# Allocate 512 MiB for your disk image fallocate -l 512M image.img # Alternatively you can use truncate -s 512M image.img # Partition the disk image gdisk image.img Command (? for help): n Partition number (1-128, default 1): 1 First sector (34-1048542, default = 2048) or size: 2048 Last sector (2048-1048542, default = 1048542) or size: +256M Hex code or GUID (L to show codes, Enter = 8300): ef00 Command (? for help): w Do you want to proceed? (Y/N): y # Attach the loopback device sudo losetup -f image.img losetup NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO /dev/loop9 0 0 0 0 image.img 0 sudo kpartx -av /dev/loop9 # If kpartx does not work, you can also try losetup with "-P". # Format the EFI System Partition sudo mkfs -t vfat -n EFI -F 32 /dev/mapper/loop9p1 # Install Clover ./install.sh Type in your target disk device (e.g. /dev/sdx): /dev/loop9 Type in your ESP partition device (e.g. /dev/sdx9): /dev/mapper/loop9p1 # Detach the loopback device sudo kpartx -dv /dev/loop9 sudo losetup -d /dev/loop9

For some buggy BIOS where BiosBlockIO is needed, search install.sh for BOOTFILE=boot6 and replace with BOOTFILE=boot7 .

The original author of this program, clover-linux-installer, is StarBrilliant.

This program is released under General Public License version 3.

You should have received a copy of General Public License text alongside with this program. If not, you can obtain it at http://gnu.org/copyleft/gpl.html.

This program comes with no warranty, the author will not be resopnsible for any damage or problems caused by this program.

About

Install Clover UEFI emulation environment from Linux

Источник