Create script file in linux

How to Create and Use Bash Scripts

Bash scripting is an extremely useful and powerful part of system administration and development. It might seem extremely scary the first time you do it, but hopefully this guide will help ease the fear.

Bash is a Unix shell, which is a command line interface (CLI) for interacting with an operating system (OS). Any command that you can run from the command line can be used in a bash script. Scripts are used to run a series of commands.

Bash is available by default on Linux and macOS operating systems.

This is not meant to be an extensive guide to bash scripting, but just a straightforward guide to getting started with making your first script, and learning some basic bash syntax.

Note: Newer macOS installations (from Catalina) come installed with zsh (Z shell) as the new default, but everything in this article will still be applicable.

• A basic command line knowledge is required. Everything you need to know to get started can be found in my How to Use the Command Line article.

This guide was created on macOS, and will be using /Users/you as the default user directory for all examples. However, the concepts here will apply to any Unix-like operating system, including macOS and various Linux distributions.

In this tutorial, we’re going to:

Making a bash script is a lot simpler than you might think.

Create a file called hello-world , using the touch command.

Edit the file with the program of your choice. Within the file, print a string that says «Hello, world!’ using echo .

Now from the command line, run the script using the bash interpreter:

You’ll see the script has run successfully from the output.

That’s it, you’ve created your first script!

So far, you’ve learned how to run a script from the command line prefixed with the bash interpreter. However, if you want to run the script by name alone, it won’t work. Try to run the file simply by typing the name of the file and pressing enter. Note that we’re prefixing the file with ./ , which means a file in the current directory.

bash: ./hello-world: Permission denied

In order to run a file directly, we’ll need to change the permissions to allow the script to be executable for the user. chmod is a command that changes permissions on a file, and +x will add execute rights to the script.

In order to interpret the file as an executable, you’ll also have to add the shebang ( #! ) at the top of the script. In Unix-like systems, a text file with a shebang is interpreted as an executable file. You can confirm where the bash interpreter is located with which bash.

We’ll add #!/bin/bash to the top of the script.

Note: You may also see #!/usr/bin/env bash instead, which can be used if you don’t know the exact path for bash.

Now you can run hello-world directly.

Note: In order to run a bash script without specifying the directory (using ./ , for example) you would have to add the directory of the script to the PATH by running export PATH=$PATH:/path/to/script/directory . However, this is generally not necessary for personal scripts.

A simple string in Bash does not require double quotes — you can write it directly.

 echo Just a regular string

A single or double quote will expect a closing match, so in order to use one in such a string, you would need to escape the quote.

However, if you want to use a single or double quote in a string without escaping characters, you can do so by wrapping your string in quotes.

 echo 'A single quoted "string"' echo "A double quoted 'string'"

A single quoted "string" A double quoted 'string'

With the -e flag, bash will interpret strings with backslash-escaped characters, such as \n for newline. This also requires a quoted string.

 echo -e "This string has a \new line"

This string has a new line

Double quoted strings are also important for use with variables, as we’ll see in the next section.

A variable is declared without a dollar sign ( $ ), but has one when invoked. Let’s edit our hello-world example to use a variable for the entity being greeted, which is World .

 #!/bin/bash who="World" echo "Hello, $who!"

Note that who = «World» with a space between the assignment is not valid — there must not be a space between variable and value.

Double quoted strings are required for interpolating variables. Within a single quoted string, the dollar sign would be interpreted literally

Another way you might see variables written is surrounded by curly brackets along with the dollar sign, which is known as parameter expansion.

This syntax is necessary for anything more complex you might do with a variable, such as getting one item from an array.

If you would like to use the output of a shell execution within a string, you can do so with a dollar sign followed by parentheses. ( $() ). For example the whoami command will print out your current user. To use it within a string, wrap whoami in the shell execution syntax.

We declared a variable in the last example, but we can also have the user set the value of a variable dynamically. For example, instead of just having the script say Hello, World! , we can make it ask for the name of the person calling the script, then output that name. We’ll do this using the read command.

 #!/bin/bash echo 'Who are you?' read who echo "Hello, $who!"

Who are you? > Tania Hello, Tania!

Operators are slightly different in bash than what you might be used to.

In order to compare numbers, you will use the operators in the number comparison column, such as -lt for less than.

In order to compare strings, you will use the operators in the string comparison column, such as < for less than.

This is the opposite of what you might expect, but it’s the way it works in bash.

Number Comparison	String Comparison	Description
-eq	==	Equal
-ne	!=	Not equal
-gt	>	Greater than
-ge	>=	Greater than or equal
-lt		Less than
-le		Less than or equal

You can also use -z to test for emptiness on a string.

if statements use the if , then , else , and fi keywords. The condition goes in square brackets.

 #!/bin/bash echo 'How old are you?' read age if [ $age -gt 20 ] then echo 'You can drink.' else echo 'You are too young to drink.' fi

How old are you? > 30 You can drink.

Bash uses for , while , and until loops. In this example, I’ll use the for. in loop to get all the files in a directory and list them.

 #!/bin/bash files=/Users/you/dev/* for file in $files do echo $(basename $file) done

hello-world check-id list-files

An array in bash is defined inside parentheses. There are no commas between the items of the array.

 beatles=('John' 'Paul' 'George' 'Ringo')

To access an item from an array, you’ll use square brackets ( [] ). Arrays are 0-indexed in bash. It is also necessary to use the paramter expansion syntax.

I hope this article has been helpful for you to get started with bash scripting. The concept of having a script that has complete access to anything on my computer was initially a frightening thought for me, but once I got accustomed to it I learned how useful and efficient it can be.

Newsletter

If you liked this post, sign up to get updates in your email when I write something new! No spam ever.

Comments

About me

Hello and thanks for visiting! My name is Tania Rascia, and this is my website and digital garden. 🌱

I’m a software developer who creates open-source projects and writes about code, design, and life. This site is and has always been free of ads, trackers, social media, affiliates, and sponsored posts.

Post Details

Category

Tags

Newsletter

Get updates when I write something new! No spam, I respect your inbox.

Источник

Create script file in linux

Learn Latest Tutorials

Preparation

Trending Technologies

B.Tech / MCA

Javatpoint Services

JavaTpoint offers too many high quality services. Mail us on h[email protected], to get more information about given services.

• Website Designing
• Website Development
• Java Development
• PHP Development
• WordPress
• Graphic Designing
• Logo
• Digital Marketing
• On Page and Off Page SEO
• PPC
• Content Development
• Corporate Training
• Classroom and Online Training
• Data Entry

Training For College Campus

JavaTpoint offers college campus training on Core Java, Advance Java, .Net, Android, Hadoop, PHP, Web Technology and Python. Please mail your requirement at [email protected].
Duration: 1 week to 2 week

Like/Subscribe us for latest updates or newsletter

Источник

How do I create a script file for terminal commands?

In Windows I can write a file containing commands for cmd (usually .cmd or .bat files). When I click on those files it will open cmd.exe and run them commands the file contains. How would I do this in Ubuntu? I’m sure this is a duplicate, but I can’t find my answer.
Its similar to these questions, but they don’t answer the question: Store frequently used terminal commands in a file CMD.exe Emulator in Ubuntu to run .cmd/.bat file

3 Answers 3

First, the most common is to write a file, make sure the first line is

Then save the file. Next mark it executable using chmod +x file

Then when you click (or run the file from the terminal) the commands will be executed. By convention these files usually have no extension, however you can make them end in .sh or any other way.

• Any (and I mean any) file can be executed in Linux provided the first line is a path to the program that should interpret the file. Common examples include /bin/python , /bin/sh , /bin/dash , but even odd ball things work like /bin/mysql
• Bash is a full language. It is vastly more complex than cmd.exe in windows. It has a strong programming language that supports functions, loops, conditionals, string operations, etc.
• These documents may help if you run into problems.
• If you do not wish to make the file executable then you can run it by passing it as an argument to bash: bash file/to/run.sh

A Simple Bash Example

#!/bin/bash echo "This is a shell script" ls -lah echo "I am done running ls" SOMEVAR='text stuff' echo "$SOMEVAR" 

The second method is to record commands using script . Run script then just do stuff. When you are done doing stuff type exit and script will generate a file for you with all the «stuff» you did. This is less used but works quite well for making things like macros. man script for more info.

Источник