Sound Blaster Audigy Rx — нет 5.1 звука по S/PDIF
P.S. может цифровой 5.1 звук через оптический Toslink кабель в Arch Linux вообще недоступен? Или для этого придётся покупать звуковую карту .
S/PDIF 5.1 только сжатый dtc или ac может гонять. Если ресивер позволяет на hdmi или usb лучше переключиться, ну или по аналогу
Default sink name: alsa_output.pci-0000_04_00.0.iec958-stereo name: device.string = "iec958:2" device.profile.name = "iec958-stereo" iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown) active port: name: input:iec958-stereo: Digital Stereo (IEC958) Input (priority 55, available: unknown) output:analog-stereo+input:iec958-stereo: Analog Stereo Output + Digital Stereo (IEC958) Input (priority 5155, available: unknown) output:analog-mono+input:iec958-stereo: Analog Mono Output + Digital Stereo (IEC958) Input (priority 155, available: unknown) output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500, available: unknown) output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5551, available: unknown) output:iec958-stereo+input:analog-mono: Digital Stereo (IEC958) Output + Analog Mono Input (priority 5501, available: unknown) active profile: alsa_output.pci-0000_04_00.0.iec958-stereo/#0: CA0108/CA10300 [Sound Blaster Audigy Series] (SB1550 Audigy 5/Rx) Digital Stereo (IEC958) alsa_output.pci-0000_04_00.0.iec958-stereo.monitor/#0: Monitor of CA0108/CA10300 [Sound Blaster Audigy Series] (SB1550 Audigy 5/Rx) Digital Stereo (IEC958) iec958-stereo-input: Digital Input (S/PDIF) (priority 0, latency offset 0 usec, available: unknown) iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)SB Audigy Rx with Jack in Ubuntu Studio Disco Dingo
Right. Firstly sorry for the wall of text. the commands I ran were ones I saw others asking people to run to help fix their issue. I am running the latest ubuntu studio Disco Dingo 19.04 I am looking to get Jack audio playback setup and I am unsure of how to set up my card as there are loads of different options I can pick from. I am unsure which one to pick and I get confused which ones I’ve tried. can anyone help me out? commands run below. is there anything else I can try to set this up? Running: aplay —list-devices gets:
**** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC889 Analog [ALC889 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: SB [HDA ATI SB], device 1: ALC889 Digital [ALC889 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Audigy2 [SB Audigy 5/Rx [SB1550]], device 0: emu10k1 [ADC Capture/Standard PCM Playback] Subdevices: 31/32 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 Subdevice #8: subdevice #8 Subdevice #9: subdevice #9 Subdevice #10: subdevice #10 Subdevice #11: subdevice #11 Subdevice #12: subdevice #12 Subdevice #13: subdevice #13 Subdevice #14: subdevice #14 Subdevice #15: subdevice #15 Subdevice #16: subdevice #16 Subdevice #17: subdevice #17 Subdevice #18: subdevice #18 Subdevice #19: subdevice #19 Subdevice #20: subdevice #20 Subdevice #21: subdevice #21 Subdevice #22: subdevice #22 Subdevice #23: subdevice #23 Subdevice #24: subdevice #24 Subdevice #25: subdevice #25 Subdevice #26: subdevice #26 Subdevice #27: subdevice #27 Subdevice #28: subdevice #28 Subdevice #29: subdevice #29 Subdevice #30: subdevice #30 Subdevice #31: subdevice #31 card 2: Audigy2 [SB Audigy 5/Rx [SB1550]], device 2: emu10k1 efx [Multichannel Capture/PT Playback] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 2: Audigy2 [SB Audigy 5/Rx [SB1550]], device 3: emu10k1 [Multichannel Playback] Subdevices: 1/1 Subdevice #0: subdevice #0 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40) 01:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller (rev a1) Subsystem: Gigabyte Technology Co., Ltd GM204 High Definition Audio Controller 05:00.0 Multimedia audio controller: Creative Labs CA0108/CA10300 [Sound Blaster Audigy Series] 0 [SB ]: HDA-Intel - HDA ATI SB HDA ATI SB at 0xfe600000 irq 16 1 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xfe080000 irq 36 2 [Audigy2 ]: Audigy2 - SB Audigy 5/Rx [SB1550] SB Audigy 5/Rx [SB1550] (rev.0, serial:0x10241102) at 0xc000, irq 37 3 [Device ]: USB-Audio - Live Streaming USB Device eEver Live Streaming USB Device at usb-0000:09:00.0-1, super speed 4 [MIXER5 ]: USB-Audio - JUST MIXER5 C-Media Electronics Inc. JUST MIXER5 at usb-0000:02:00.0-1, full speed 5 [C920 ]: USB-Audio - HD Pro Webcam C920 HD Pro Webcam C920 at usb-0000:02:00.0-2.2, high speed 00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40) Subsystem: Gigabyte Technology Co., Ltd SBx00 Azalia (Intel HDA) [1458:a132] Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel -- 01:00.1 Audio device [0403]: NVIDIA Corporation GM204 High Definition Audio Controller [10de:0fbb] (rev a1) Subsystem: Gigabyte Technology Co., Ltd GM204 High Definition Audio Controller [1458:3682] Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 2 jack_out module-jack-sink.c float32le 2ch 48000Hz SUSPENDED Linux Mint Forums
[SOLVED] Sound Blaster Audigy Rx unable to acquire microphone
Forum rules
Before you post please read how to get help. Topics in this forum are automatically closed 6 months after creation.
[SOLVED] Sound Blaster Audigy Rx unable to acquire microphone
Post by Vortigern » Tue Dec 18, 2018 4:40 pm
Hi,
I have Sound Blaster Audigy Rx and I’ve just tried to acquire a stereo microphone but I failed.
I’ve tried both the Mic1 and Mic2: I was able to hear my voice on the speakers, when using an high capture gain, but no sound was passed to the system, meaning I could not use it for skype, record audio, steam voice chat etc. Also on «Audio» panel, no matter the input gain and how loud I speak, the bar is always grayed out.
I’ve tried to turn up all possible volumes even from «alsamixer» in the CLI with no luck.
I do have another issue: in order to use the microphone I’ve had to use a USB audio card and now the Sound Blaster is not the preferred device: each time I restart the computer I have to set right output device.
How can I solve those issues?
I’m running Linux Mint 19 Cinnamon 64bit.
Here below the device and system spec
$ lspci -vvv -s 09:00.0 09:00.0 Multimedia audio controller: Creative Labs CA0108/CA10300 [Sound Blaster Audigy Series] Subsystem: Creative Labs SB1550 Audigy 5/Rx Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: snd_emu10k1 Kernel modules: snd_emu10k1$ inxi -Fxz System: Host: i7-4790K Kernel: 4.15.0-42-generic x86_64 bits: 64 gcc: 7.3.0 Desktop: Cinnamon 3.8.9 (Gtk 2.24.32) Distro: Linux Mint 19 Tara Machine: Device: desktop Mobo: ASRock model: Z97 Extreme6 serial: N/A UEFI [Legacy]: American Megatrends v: P2.80 date: 03/06/2018 CPU: Quad core Intel Core i7-4790K (-MT-MCP-) arch: Haswell rev.3 cache: 8192 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 31990 clock speeds: max: 4400 MHz 1: 1756 MHz 2: 1537 MHz 3: 1459 MHz 4: 1447 MHz 5: 1409 MHz 6: 1477 MHz 7: 1364 MHz 8: 1463 MHz Graphics: Card: NVIDIA GM206 [GeForce GTX 960] bus-ID: 01:00.0 Display Server: x11 (X.Org 1.19.6 ) drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau) Resolution: 1920x1080@60.00hz OpenGL: renderer: GeForce GTX 960/PCIe/SSE2 version: 4.6.0 NVIDIA 390.77 Direct Render: Yes Audio: Card-1 NVIDIA Device 0fba driver: snd_hda_intel bus-ID: 01:00.1 Sound: ALSA v: k4.15.0-42-generic Card-2 Creative Labs CA0108/CA10300 [Sound Blaster Audigy Series] driver: snd_emu10k1 port: b000 bus-ID: 09:00.0 Card-3 C-Media CM108 Audio Controller driver: USB Audio usb-ID: 003-004 Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 03:00.0 IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: Drives: HDD Total Size: 1756.4GB (62.8% used) ID-1: /dev/sda model: Crucial_CT256M55 size: 256.1GB ID-2: /dev/sdb model: WDC_WD10EURS size: 1000.2GB ID-3: /dev/sdc model: WDC_WD5000AACS size: 500.1GB Partition: ID-1: / size: 234G used: 54G (25%) fs: ext4 dev: /dev/sda1 ID-2: swap-1 size: 1.07GB used: 0.00GB (0%) fs: swap dev: /dev/sdb3 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: System Temperatures: cpu: 37.0C mobo: N/A gpu: 0.0:30C Fan Speeds (in rpm): cpu: N/A Info: Processes: 284 Uptime: 35 min Memory: 2521.7/15988.9MB Init: systemd runlevel: 5 Gcc sys: 7.3.0 Client: Shell (bash 4.4.191) inxi: 2.3.56 Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.