Csr bluetooth adapter drivers

CSR Bluetooth Driver 5.0.11.0 Win 7/8 – 64-bit

You can download the CSR Bluetooth Remote Control Device Driver below. Note that this is a Windows 7 and Windows 8 for a 64bit system. You can search this website for the 32bit version of the software. Always scan your files which you download from the internet. This was the last driver released being version 5.0.11.0. Note that this file is a CAB file which people hate however you can see the instructions below as to how to install it.

CSR Bluetooth Driver 5.0.11.0 Win 7/8 – 64-bit

Download the zip file below and extract the contents to a drive or directory where you can find them later. Once you extract the file you will note that there is a file called “D8.Cab”. Once you have the file you will need to install the Cab file into your computer. You can find the 32bit version here.This is shown below.

1. Open an elevated command prompt.
2. Type the following command: dism /online /add-package /packagepath:”C:\D8.cab”
3. Again, correct the path to the update to match your file location.

You can also extract the files to a directory. Then from there open the device manager on your computer. This is done by – Device Manager (right click on My Computer, choose Manage and then find Device Manager. Then simply Right click on the hardware device you wish to update. Alternatively look where there is a ‘bubble’ around a device and click on that and then click on update – > browse and browse to where the drivers had been extracted too. It will then install.

CSR Bluetooth Driver Identification

There are common issues when it comes to certain device drivers. The CSR Bluetooth driver is no different. The most common error that people see is the usb\vid_0a12&pid_0001&rev_8891 which is part of the driver identifier. This hardware ID can be found in many products. This CSR Bluetooth Chip can be found in the devices.

USB\VID_0A12&PID_0001

CSR Bluetooth Chip – USB\VID_0bda&PID_0001

CSR Bluetooth Chip – USB\VID_0BDA&PID_0002

CSR Bluetooth Chip – USB\VID_13D3&PID_3386

Realtek Bluetooth 5.0 Adapter – USB\VID_0BDA&PID_8723

usb\vid_0a12&pid_0001&rev_8891

You can see that the operating system for this driver is Windows as well as Windows 8 and a 64bit driver.

You can now download this Bluetooth Driver for your computer. The hardware ID is USB\VID_0a12&pid_0001&rev_8891 for windows. This Bluetooth driver is free as you can see. See also the other hardware being the hardware ID which is also the USB\VID_0a12&pid_0001&rev_8891 . The download links are here lower in this page. You can also find the Bluetooth dongle driver on this website.

These are compatible Bluetooth chips. Also you will note that the Realtek chip is also using similar hardware ID’s. You will also note that this is the Windows 7 and Windows 8 version on the driver. You will also note that the audio driver is seperate. Now first things first. We have to install this with a .inf file as there is no executable file for the driver.The audio driver is a cab file and there is a another way to install these.

CSR Bluetooth Driver install

The CSR Bluetooth driver Windows 7 is a inf file so see how to install these:

You will do the same with the audio driver. Extract the zip file, then the can file. The right click on the inf file and then left click on the install option. The computer will then recognise the CSR bluetooth hardware.

CSR v5.0 Bluetooth Dongle does not work

We are going to need to troubleshoot the CSR when you are using Windows 10 for this driver. This is a Windows 7/8 driver. When on Windows 10 there might be an error. Lets see if we can make the driver work on Windows 10. The Windows 10 driver is in the Microsoft driver updates but they might create errors where the Bluetooth is no longer recognised.

– In the Windows 10 search type” Device manager” and open it;

– Click on the small arrow next to either “Bluetooth” or “Universal Serial Bus controllers”;

– Now right click on “CSR” and then select Update Driver

– Select” Browse my computer for driver update”

– Now Select on the bottom “Let me pick from a list of available drivers on my Computer”

– Finally Select “Generic Bluetooth Driver”

This will normally correct the problem and you should now have these problems again. The drivers for the CSR5 have been added below for Windows 7 and Windows 8. This is however a Windows 10 problem. More likely than not why you will get the usb vid_0a12&pid_0001&rev_2520 driver download problem. Also the usb vid_0a12&pid_0001&rev_8891 driver download problem. These are the driver hardware ID for the Bluetooth device. You can search this website for more information where you can search for other CSR 5 drivers. Use the side bar for this.

CSR v5.0 Hardware problems

We have already explained before where USB errors can also occur. These are hardware issues. You can see the USB hardware issues on this website as well. This is a brief overview of the most common problems that users will experience. Try these if all else so far has failed to rectify the problems.

This is a problem with certain motherboards. Many motherboards will not run the Bluetooth from the front and some dont want to work while in the rear of the computer. Try all of them before you think that it may be a driver problem when its actually a hardware problem.

This is a good test for the Bluetooth device. The question is does the device work on other computers. It might be that the device is broken and that it is not a USB dongle problem with the Bluetooth. It might then also not be a driver problem.

Windows 10 problems have been explained before. See above as to what to do when the device cannot be seen by the computer. This is a common problem with Windows 10 updating drivers or its driver database.

Again, the update might be a problem with Windows 10. See when your computer updated the drivers and then see the solution to the Windows windows problems.

CSR Bluetooth Driver 5.0.11.0 Win 7/8 – 64-bit

CSR Bluetooth Stereo Audio Driver 5.0.14.0 64-bit

This page should solve most of your problems with this driver. Be this a Windows 7 or a Window 8 driver. Even the Windows 10 update where the driver is not recognised. Again, you can search this website for more assistance and guidance for you. There also also other drivers on here such as the Bluesoleil generic Bluetooth driver as an example.

Incoming Search Terms:

Источник

CSR USB 2.0 Bluetooth 4.0 Adapter Driver V4.0/2.1.60.0 Windows XP / Vista / 7 / 8 / 8.1 / 10 32-64 bits

Тип: драйвер
Имя: CSR4.0 USB 2.0 Bluetooth 4.0 Adapter Driver / CSR Harmoney Wireless Software Stack
Производитель: Cambridge Silicon Radio
Версия драйвера (программы установщика):
V4.0, 2.1.60.0
Операционная система:
Windows XP Windows Vista Windows 7 Windows 8 Windows&nbsp8.1 Windows 10
Разрядность ОС:
32-bit (x86) 64-bit (x64)
Размер файла: 408 mb
Дата выхода: 2012-02-23

CSR4.0 USB 2.0 Bluetooth 4.0 Adapter Driver / CSR Harmoney Wireless Software Stack. Характеристики драйвера

CSR Harmoney Wireless Software Stack V4.0 от Cambridge Silicon Radio для блютуз мини USB 2.0 адаптеров с драйвером версии 2.1.60.0.

CSR4.0 USB 2.0 Bluetooth 4.0 Adapter Driver предназначен для автоматической установки на Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10

Внимание! Перед установкой драйвера CSR4.0 USB 2.0 Bluetooth 4.0 Adapter Driver / CSR Harmoney Wireless Software Stack рекомендутся удалить её старую версию. Удаление драйвера особенно необходимо — при замене оборудования или перед установкой новых версий драйверов для видеокарт. Узнать об этом подробнее можно в разделе FAQ.

Источник

Драйверы для устройств Bluetooth CSR 💾

В связи с наличием беспроводных наушников решил заказать донгл для их подключения к ПК. Как часто бывает, при установке китайского устройства, возникли проблемы. Поэтому я решил показать другим, где скачать и как установить CSR v 4.0 Bluetooth драйвер на Windows 10 и 7.

Как поставить CSR 4.0 Bluetooth драйвер на Windows 10 или 7 64x

С диска

В комплекте вместе с адаптером шел диск. Вот как он выглядит:

Так как дисковода у меня нет, файлы с него я нашел в интернете. Вы можете загрузить их по ЭТОЙ ссылке. В комплект, помимо нужного сертификата, входит программа, в которую включена поддержка A2DP и виртуального каталога подключенных устройств. После инсталляции все заработает автоматически. Вес архива 407 мегабайт. Вот так выглядит установщик:

А вот так окно приложения:

Данный вариант мне не понравился из-за постоянного отвала девайсов, которые я подключал к блютузу. Также раздражало моргание светодиода, которое работало даже после отключения персонального компьютера от сети. Поэтому я решил проблему другим способом.

Через диспетчер устройств

Я узнал, что в bluetooth csr 4.0 установлен чип от Cambridge Silicon Radio маркировки 8510 A10. Вот что я сделал, и это можете попробовать сделать вы:

1. В панели управления зайдите в «Устройство и принтеры»
2. Выберите «Dongle»

Во вкладке «Оборудование» выберите «Свойства»

Во вкладке «Общие» выберите «Изменить параметры»

Нажмите «Обновить драйвер»

В открывшемся окне кликните на «Выполнить поиск на этом компьютере»

Теперь кликните на «Выбрать из списка ужу установленных»

Снимите галочку «Только совместимые устройства». Теперь, в колонке производитель выберите «CambridgeSiliconRadio LTD». В правой колонке найдите CSRNanosira-multimedia и установите его, нажав «Далее».

Увидев сообщение, как на скриншоте ниже, перезагрузите ПК или ноутбук.

Теперь вы можете подключать любые гаджеты прямо из под Виндовс.

Примечание

Если у вас будет плохое качество звука, то аудио устройство нужно перевести на «Стерео режим», отключив «Hands Free». Это также делается через «Принтеры».

Видео

Заключение

Теперь вы знаете как поставить csr 4.0 bluetooth драйвер на windows. Если вам интересно почитайте, как настроить материнскую плату Клисре.

Источник