Csr bluetooth radio cambridge silicon radio limited

CSR Bluetooth Driver

These are the CSR Bluetooth driver or csr bluetooth driver Windows 7 which you will find here. This is the CSR Bluetooth driver Windows 7. There is a limited amount of use as these are mainly for older products. You will note that there are a number of options from 32bit as well as the 64bit of the range of drivers. You will also note that the CSR Bluetooth drivers listed below is for a remote control device, CSR hands free audio driver, CSR filter driver. These are mainly the CSR drivers which you will find.

CSR Bluetooth Driver

See the options below for the CSR Bluetooth products on the market. These tend to be older devices.

Hardware ID

The USB\VID_1131&PID_1001&REV_0373 hardware ID is from the Cambridge Silicon Radio (CSR) ISSC USB Bluetooth Device. The drivers here will work on the hardware as you can see. This is called the ISSC USB Bluetooth Device with the USB\VID_1131&PID_1001&REV_0373. This as stated is from Cambridge Silicon Radio (CSR). See also the bluesoleil bluetooth driver windows 7 32 bit on here. The usb vid_1131&pid_1001&rev_0373 Windows 10 is also the same hardware.

CSR Bluetooth Remote Control Driver

64 Bit Version

These drivers provides the installation files for the Bluetooth Remote Control Device Driver version 5.0.11.0. You will note that this is a driver which is a cab file. You will have to download it and then then extract the cab file to your computer and then install on its own. This driver will work on the Windows 7 64 bit as well as the Windows 8 64 bit. This driver is the Bluetooth Stereo Audio as per the INF file.

Download the file below which is the CSR remote control driver and then extract the files. Inside the zip file you will find the file as seen above.

Now you will need to right-click on the INF file and then click on ‘install’ on the new menu. From there the driver will install and Windows will show you that it has found new hardware. It will then install the CSR driver.

32 Bit Version

Much like above there is a CSR Windows 7 driver which is also the CSR driver with the Windows 8 driver. This is however the 32 bit version of the driver while the 64bit driver has been added below. This is the BthAvrcp driver which is the Bluetooth Remote Control Device.

Much like above you will note that you will need to download the file and extract the content. From there you will need to right-click on INF file and click on the ‘install’ option and then the driver will install the driver being the 32bit version.

Remote Control Driver (Windows 7/Windows 8 64-bit)

Remote Control Driver (Windows 7/Windows 8 32-bit)

CSR Bluetooth Hands-Free Audio Driver

The driver here provides the installation files for CSR Hands-Free Audio Device Driver. This was the last version released being the last version 5.0.14.0. You will note that this was originally a cab file and you will need to ensure that you download the Windows driver from Microsoft and then allow it to install on your computer. This is the 64 bit version of the CSR Bluetooth drivers. The 64-bit as well as the 32-bit version of the drivers which are below.

This is an INF install is how this driver is installed. You will need to download the zip file below. You will need to extract the content of the zip file and then see the files as shown above. Also you will need to find the INF and then right-click on the INF file and then click on ‘install’ on the new menu as shown as above. Windows will then recognise the driver and install it. Then Windows will tell you that it found new hardware. You will need to reboot the computer after this CSR install. See also the Bluetooth Driver on here.

CSR Bluetooth Hands-Free Audio (Windows 7/Windows 8 64-bit)

CSR Bluetooth Hands-Free Audio (Windows 7/Windows 8 32-bit)

CSR Bluetooth Stereo Audio Driver

The driver here provides the installation files for CSR Stereo Audio Device the 64 bit version. This was the last version released as you can see, being the last version 5.0.14.0.

You will note that this is a cab file and you will need to ensure that you download the Windows driver from Microsoft and then allow it to install on your computer. This is the 64 bit version of the CSR driver. There are two versions of the driver. There is the CSR Bluetooth Windows 7 32 bit as well as the driver Windows 7 64 bit. They are all here. This is the stereo audio driver.

Install the CSR Bluetooth Audio driver

Download the zip file and extract the content. You can see here which files are in the zip file. Once this is done you will then need to right-click on the INF file you will need to click on ‘install’. Windows will then install the CSR driver. You will then see a confirmation for Windows that the new hardware has been found and will then install the Bluetooth Stereo Audio driver.

See above what you would be looking for after you right-click on the INF file. Then click on ‘install’ and the driver will be installed be this Windows 7 or Windows 10. This will also work on other operating systems with the INF being installed.

CSR Bluetooth Stereo Audio (Windows 7/Windows 8 64-bit)

CSR Bluetooth Stereo Audio (Windows 7/Windows 8 32-bit)

CSR Bluetooth Filter

The driver here provides the installation files for Cambridge Silicon Radio Bluetooth Filter Driver the 64bit version. This was the last version released as you can see, being the last version 5.0.14.0. You will note that this is a cab file and you will need to ensure that you download the Windows driver from Microsoft and then allow it to install on your computer. This is the 64 bit version of the CSR driver.

This is an INF install so it will work on any operating system, even Windows 10. If you are looking for the CSR driver Windows 10. Then any of these will work on a Windows 10 operating system.

Источник

Драйверы для устройств Bluetooth CSR 💾

В связи с наличием беспроводных наушников решил заказать донгл для их подключения к ПК. Как часто бывает, при установке китайского устройства, возникли проблемы. Поэтому я решил показать другим, где скачать и как установить CSR v 4.0 Bluetooth драйвер на Windows 10 и 7.

Как поставить CSR 4.0 Bluetooth драйвер на Windows 10 или 7 64x

С диска

В комплекте вместе с адаптером шел диск. Вот как он выглядит:

Так как дисковода у меня нет, файлы с него я нашел в интернете. Вы можете загрузить их по ЭТОЙ ссылке. В комплект, помимо нужного сертификата, входит программа, в которую включена поддержка A2DP и виртуального каталога подключенных устройств. После инсталляции все заработает автоматически. Вес архива 407 мегабайт. Вот так выглядит установщик:

А вот так окно приложения:

Данный вариант мне не понравился из-за постоянного отвала девайсов, которые я подключал к блютузу. Также раздражало моргание светодиода, которое работало даже после отключения персонального компьютера от сети. Поэтому я решил проблему другим способом.

Через диспетчер устройств

Я узнал, что в bluetooth csr 4.0 установлен чип от Cambridge Silicon Radio маркировки 8510 A10. Вот что я сделал, и это можете попробовать сделать вы:

1. В панели управления зайдите в «Устройство и принтеры»
2. Выберите «Dongle»

Во вкладке «Оборудование» выберите «Свойства»

Во вкладке «Общие» выберите «Изменить параметры»

Нажмите «Обновить драйвер»

В открывшемся окне кликните на «Выполнить поиск на этом компьютере»

Теперь кликните на «Выбрать из списка ужу установленных»

Снимите галочку «Только совместимые устройства». Теперь, в колонке производитель выберите «CambridgeSiliconRadio LTD». В правой колонке найдите CSRNanosira-multimedia и установите его, нажав «Далее».

Увидев сообщение, как на скриншоте ниже, перезагрузите ПК или ноутбук.

Теперь вы можете подключать любые гаджеты прямо из под Виндовс.

Примечание

Если у вас будет плохое качество звука, то аудио устройство нужно перевести на «Стерео режим», отключив «Hands Free». Это также делается через «Принтеры».

Видео

Заключение

Теперь вы знаете как поставить csr 4.0 bluetooth драйвер на windows. Если вам интересно почитайте, как настроить материнскую плату Клисре.

Источник

CSR USB 2.0 Bluetooth 4.0 Adapter Driver V4.0/2.1.60.0 Windows XP / Vista / 7 / 8 / 8.1 / 10 32-64 bits

Тип: драйвер
Имя: CSR4.0 USB 2.0 Bluetooth 4.0 Adapter Driver / CSR Harmoney Wireless Software Stack
Производитель: Cambridge Silicon Radio
Версия драйвера (программы установщика):
V4.0, 2.1.60.0
Операционная система:
Windows XP Windows Vista Windows 7 Windows 8 Windows&nbsp8.1 Windows 10
Разрядность ОС:
32-bit (x86) 64-bit (x64)
Размер файла: 408 mb
Дата выхода: 2012-02-23

CSR4.0 USB 2.0 Bluetooth 4.0 Adapter Driver / CSR Harmoney Wireless Software Stack. Характеристики драйвера

CSR Harmoney Wireless Software Stack V4.0 от Cambridge Silicon Radio для блютуз мини USB 2.0 адаптеров с драйвером версии 2.1.60.0.

CSR4.0 USB 2.0 Bluetooth 4.0 Adapter Driver предназначен для автоматической установки на Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10

Внимание! Перед установкой драйвера CSR4.0 USB 2.0 Bluetooth 4.0 Adapter Driver / CSR Harmoney Wireless Software Stack рекомендутся удалить её старую версию. Удаление драйвера особенно необходимо — при замене оборудования или перед установкой новых версий драйверов для видеокарт. Узнать об этом подробнее можно в разделе FAQ.

Источник