Dji spark нет wifi

Нет сети WiFi от пульта dji spark

Пользователи

2 сообщений

• Город: Москва

Отправлено 06 марта 2019 — 08:42

Добрый день, после обновления пульт от dji spark перестал транслировать WiFi сигнал, индикатор моргает красным, напрямую к дрону не подключается, помогите решить проблему

#2 OFFLINE DozorSPb

Заблокированные

2 586 сообщений

• Город: Санкт-Петербург
• Коптер: Mavic Pro / Spark / Diatone M530 / Walkera Runner

Отправлено 06 марта 2019 — 11:04

#3 OFFLINE Boss77

Пользователи

6 сообщений

• Город: минск

Отправлено 24 июня 2019 — 11:54

делаю сброс и подключаю заново, спарк подключается к пульту, а сеть wi-fi от пульта пропадает..

к айфону продключается без проблем, а к андроиду не хочет(хуавей)

Сообщение отредактировал Boss77: 24 июня 2019 — 09:16

Источник

Having trouble connecting your DJI Spark to Android? Here’s how to fix it

DJI’s latest drone, the Spark, got some serious attention when it was announced last month and today I finally got my hands on one. The adorably tiny drone is advertised as something for beginners that doesn’t require much in terms of setup. Currently, though, there are some issues with the Spark’s WiFi connection. If you’re experiencing issues, here’s how to fix it.

Update: DJI reached out to us to confirm that the behavior listed below is the drone working as intended. The “Fly More Combo” is designed to pair the Spark to the remote control out of the box and the drone’s wireless network will not appear on your smartphone for this reason.

Resetting the drone’s WiFi network (with the instructions below) does allow it to be paired directly to a phone. The article that follows has been updated to reflect this.

Some users have reported problems with the Spark’s WiFi network not appearing on their smartphone during setup. During the standard setup process, the drone is expected to appear in the DJI Go 4 app and your phone’s WiFi network, but with the “Fly More Combo” of the drone, that doesn’t behave in quite the same way.

How to set up the DJI Spark with Android

The first thing you’ll need to do is connect to and activate your new drone. To do that, simply follow the steps below.

1. Charge your DJI Spark battery fully and insert into drone.
2. Download the DJI Go 4 app from the Google Play Store.
3. Open DJI Go 4 and ensure the app is set to connect to a DJI Spark.
4. Turn on your DJI Spark (one tap and one long press until fans kick in).
5. In the DJI Go 4 app on your device, tap Enter Device and connect to the Spark’s WiFi network.*
6. Enter the password found under the battery on your Spark and on the carrying case.
7. Turn off mobile data.
8. After you’ve connected to the Spark, you will be asked to activate the product and check for firmware updates.
9. Once these steps have been completed, you should now be able to fly your DJI Spark.

If your experience ends up anything like mine, you’ll be presented with one major issue first — you can’t find the Spark’s WiFi network. The Spark that ships in the “Fly More Combo” is actually designed to pair to the remote controller first rather than directly to your phone. Thankfully, it’s not very difficult to change that and control things with your Android device.

How to reset DJI Spark WiFi

1. Turn on your DJI Spark (one tap and one long press until the fans kick in).
2. Open the DJI Go 4 app on your Android device and tap Enter Device. From there you should be presented with your device’s WiFi menu.
3. Press and hold the Spark’s power button until the drone beeps once, two times (about 6 seconds). This resets the Spark’s WiFi network.
4. On your smartphone, the Spark’s WiFi network should appear as a secured network
5. From here, locate your Spark’s carrying case. The WiFi password will be listed next to the QR code. Input that password and tap Connect.

Once you’ve followed these steps, your device should have no issues connecting to the DJI Spark from your smartphone. When in use I’ve had no major issues with the app just yet, but the range is definitely minimal with my Pixel XL.

FTC: We use income earning auto affiliate links. More.

You’re reading 9to5Google — experts who break news about Google and its surrounding ecosystem, day after day. Be sure to check out our homepage for all the latest news, and follow 9to5Google on Twitter, Facebook, and LinkedIn to stay in the loop. Don’t know where to start? Check out our exclusive stories, reviews, how-tos, and subscribe to our YouTube channel

Источник

Dji spark нет wifi

Captain

lvl.1

Gunship9 Posted at 2018-2-3 06:36
Nope. The Spark is a loyal marriage partner that won’t stray. You can pair it with the remote (9 second Spark button hold), or you can pair it with the phone (3 second button hold). You can not set it to pair with both. If it is paired with the phone, the Spark hides its SSID. That keeps it from being linked to two devices trying to control it.

When the Spark is operated by the remote control, the phone is linked to the remote’s wifi SSID, not the Spark’s. The phone then just operates as a free display screen for the remote.

Thanks for the feedback Gunship9. So I guess it’s safe for me to assume that if my Spark has successfully linked to my remote, I should be able to connect my phone to the REMOTE’s WiFi.

If so, I suspect my remote simply isn’t broadcasting a WiFi signal.

Captain

You will see the little red LED on the controller turn green when it links to the Spark.

lvl.3

1 Do not turn on app on phone (yet)
2 Turn on Spark
3 Turn on remote controller
4 Wait for the controller and Spark to link — green light on controller. Takes about 30 seconds.
5 Look on phone wifi list for controller wifi — not there?
6 Turn off controller
7 Restart controller
8 Wait for the controller and Spark to link — green light on controller (again, will be quicker this time)
9 Controller wifi appears in phone wifi list
10 Connect, check box about not able to access internet.
11 Open DJi app on phone.
12 Press Go Fly.

lvl.1

djiuser_vJ4PxygYt0ZC Posted at 2018-2-4 02:25
I had the same problem, with the wifi not showing, this sequence works for me.

1 Do not turn on app on phone (yet)

HOLY SMOKES!! That actually worked

Guess I won’t be sending it all the way back to china after all.

lvl.3

I did have a few other problems with wifi disconnecting using my Moto G4+ phone. I dug out my old Google Nexus 4, discarded most of the apps, it doesn’t have a sim card so no interference from calls etc, turned off bluetooth and anything else unnecessary and it’s working pretty well at the moment. I have never had any bother with the Spark or the controller, only the app, which, apparently, is not written for android. If I’d read the app reviews on Google Play beforehand, I would definitely have thought twice about buying DJi.

lvl.1

Terra Trailblazers Posted at 2018-2-4 10:53
I did have a few other problems with wifi disconnecting using my Moto G4+ phone. I dug out my old Google Nexus 4, discarded most of the apps, it doesn’t have a sim card so no interference from calls etc, turned off bluetooth and anything else unnecessary and it’s working pretty well at the moment. I have never had any bother with the Spark or the controller, only the app, which, apparently, is not written for android. If I’d read the app reviews on Google Play beforehand, I would definitely have thought twice about buying DJi.

lvl.1

Hello, After watching all the spark video online, I felt like connecting spark might be easy but here I have nightmare. Please help. I have following issues. — spark rc wifi signal does not show up in phone, I did all 3 seconds and 9 seconds, also followed all steps guided by app. — I am able to connect phone to spark and fly easily. — I am able to successfully link spark with RC, and use camera roller it operational, but when I use my OTG Cable it still shows no response, look like my phone is charging RC via OTG that’s it.

Captain

lvl.1

djiuser_vJ4PxygYt0ZC Posted at 2018-2-4 02:25
I had the same problem, with the wifi not showing, this sequence works for me.

1 Do not turn on app on phone (yet)

lvl.1

Wolferl Posted at 2018-8-15 09:00
Have you used your OTG cable the right way around? OTG cables have a «host» end and a «client» end. The host end goes into the R/C!

lvl.1

Hi all, I got a similar problem when I moved from using an iOS phone to an android (v9). I can connect to the remote when not it is not connected to the drone but as soon as the drone is linked to the remote the phone is disconnected from remote and the remote WiFi network is not visible anymore. I tried the sequence above but did not work for me. Any idea ? Thank you for your help

Administrator

djiuser_FWwGbQYxiG5k Posted at 2-3 22:58
Hi all,
I got a similar problem when I moved from using an iOS phone to an android (v9). I can connect to the remote when not it is not connected to the drone but as soon as the drone is linked to the remote the phone is disconnected from remote and the remote WiFi network is not visible anymore. I tried the sequence above but did not work for me. Any idea ?
Thank you for your help

lvl.1

DJI Tony Posted at 2-4 15:20
Hi, we’re sorry for the inconvenience. May we know if you manage to update the firmware of your aircraft and the remote controller? Would it be possible if you could provide us with a short video of this situation for a further check? You may upload the video using the google drive or dropbox then provide the link here. Please keep us posted on the latest progress.

A little update about the problem. Since my last message, I tried with an iPhone. The RC succeeded to connect the phone while it was already linked to the drone without any issue. So I really think it is coming from the Android compatibility.

To sum up here is the sequence of what is happening
1-I turn on RC
2- I connect the Android phone to the RC network (2.4Ghz Band)
3- I turn on the drone
4- Drone will connect automatically to the remote within 30 sec and the RC led turn green. The gimball control is working.
5- The wireless connection between the Android phone and the RC is interrupted and the RC network is no more visible

Note.
-If I connect the RC to the drone before the Android phone. The RC network is not even visible.
-if iPhone is used there is no problem
-at step 2. When I open the DJI Go app. Pop up is saying that the firmware of the RC is up to date.
-i am located in Cambodia
-android v9 is on my phone

Источник

Пульт Spark не дает wifi

Пользователи

3 сообщений

• Город: Kiev
• Коптер: Spark

Отправлено 30 июля 2018 — 10:10

Алло алло Всем привет Короче тема такая летал летал себе всё нормально было на спарке без проблем Ну конечно из-за вай-фая были задержки неприятные но по крайней мере это всё работало. Недели две назад пришло обновление обновил пульт обновился парк и всё на этом всё и закончилось теперь при включение пульта wi-fi раздаётся где-то примерно минуту и обниму могу подключиться но потом wifi пропадает и уже не появляется Можно конечно летать через кабель но малейшее движение он то подключается то отключается короче в полете Ну капец как нереально то есть неудобно. Что это может быть даже не знаю потому как сигнал изначально ведь отличный но пишет что ограничено интернет соединение но она в принципе то и раньше так писала Просто раньше пульт раздавал wi-fi подключен а теперь просто выключает как будто бы стоит тайм-аут где-то То есть как теперь откатиться надо или что-то еще обновиться или где-то может что-то включить надо после этого обновления последнего?

#2 OFFLINE Iiz

Пользователи

608 сообщений

• Город: Orenburg
• Коптер: Spark

Отправлено 31 июля 2018 — 04:17

Что то много нареканий на новую прошивку, Лучшее враг хорошего , умну сней все нормально, отлетал 6 батарей, если откат на старую поможет дайте знать.
Ps Вопрос: настроился взлетел и дисконнект? Какая джига и девайс?

Сообщение отредактировал Iiz: 31 июля 2018 — 04:32

#3 OFFLINE Gipson

Пользователи

3 сообщений

• Город: Kiev
• Коптер: Spark

Отправлено 03 августа 2018 — 10:43

Iiz ,
Да какой там взлетел, ходь бы успеть видео сигнал поймать или до калибровки дойти. Писец каждый выезд чтото новое. То отг глючил один потм купил дорогой он ваще не работал, нашел дома такой же как глючил, стало нормально но это дня на два. Сегодня он перестал подрубаться по кабелю. Видимо китайский отг и ремакс type c это плохая связка. Лучше брать сразу прямой за 300грн microusb to typec. Короче сегодня выехал полетать и досвидданье по кабелю нини уже. Решил по ржать и запустил по wifi и о боже оно заработало так же круто как по кабелю. На 1км улетел и все ааагонь. Я в шоке был. Телефон lg g6. А но это только в режиме полет на мобиле а не в полете оно ищет интернет видимо и от того и проблемы но черт возьми, неделю назад сам пульт не раздавал wifi а теперь все нормас и я нничего не обновлял не назад не в перед и не трогал, просто неделю долбался на otg, такач вот странная ситуёвина.

Источник