Драйвера arduino nano linux

CH340 Drivers for Windows, Mac and Linux

The CH340 chip is used by a number of Arduino compatible boards to provide USB connectivity, you may need to install a driver, don’t panic, it’s easier than falling off a log, and much less painful.

Windows

1. Download the Windows CH340 Driver
2. Unzip the file
3. Run the installer which you unzipped
4. In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.

Older Windows Driver Version and Instructions

1. Download the Windows CH340 Driver
2. Unzip the folder.
3. If you are running a 64Bit Windows: – run the SETUP_64.EXE installer.
4. If you are running a 32Bit Windows: – run the SETUP_32.EXE installer.
5. If you don’t know, try the 64 bit and if it doesn’t work, the 32 bit.
6. In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.

Macintosh

The following github has up to day pkg files for 1.3, 1.4 and 1.5 at time of writing, thanks to Joshua Wallis for bringing this to my attention…

Direct Download Links (from the github repo above):

See the github link above for installation instructions if you need them.

Previous macinstosh downloads if the above doesn’t work for you…

(V1.3) Download the CH340 Macintosh Signed Driver for Mavericks (10.9), Yosemite (10.10) and El Capitan (10.11) and Sierra (10.12)

Inside the zip file you will find a PDF and a “pkg” file, short version, double click the pkg file, the PDF has some extra information.

OSX Sierra (10.12) Note

A kindly user, Maarten Segers reports

FYI, the driver documented here WILL crash on OSX Sierra.

I can personally not test on MacOS and can not vouch for the above drivers at github, but there you go.

See uninstalling information at the bottom of the page if the driver causes problems for you.

Here is an older version of the Mac driver, NOT FOR 10.12 Sierra

Linux

Drivers are almost certainly built into your Linux kernel already and it will probably just work as soon as you plug it in. If not you can download the Linux CH340 Driver (but I’d recommend just upgrading your Linux install so that you get the “built in” one).

Uninstalling From Macinstosh

A couple of Mac users have said “the driver crashes my mac Sierra how do I uninstall”.

Firstly regards the crash make sure you installed the 1.3 version of the driver, not the old one. You could download it directly from the Manufacturers Website in case they have issued an update since I wrote this page.

Secondly a quick google search reveals that this is how you uninstall:

1. Open a terminal and type: cd /Library/Extensions/
2. Verify that the .kext file is present: ls | grep usbserial.kext
3. Output should be: usbserial.kext
4. Then type: sudo rm -R usbserial.kext
5. Verify that the .kext file has been removed: ls | grep usbserial.kext
6. Output should be empty.
7. After you should remove the files stored in receipts folder: cd /private/var/db/receipts/
8. Find the enties: ls | grep usbserial*
9. Output should be: codebender.cc.ch34xinstaller.usbserial.pkg.bom codebender.cc.ch34xinstaller.usbserial.pkg.plist
10. Remove each one of the files of the above list: sudo rm -r filename `

All prices are New Zealand Dollars, and include GST in New Zealand

Источник

Установка драйвера CH340 для китайского ардуина UNO

Подробная инструкция по установке драйвер CH340 для для китайского клона Arduino UNO/Nano на Windows XP, Windows 7, Windows 10, Linux, Mac OS.

Китайская ардуина отличается от оригинальной тем, что в ней для программирования основного микроконтроллера используется чип CH340 вместо МК Atmega16. Этот недорогой чип позволяет снизить итоговую стоимость платы ардуины (например, ардуина UNO на CH340 будет стоить около $3 вместо $5). Китайская Arduino UNO с чипом CH340 выглядит так:

Соответственно для зашивки программы в такую ардуино на компьютере должен быть установлен драйвер для чипа CH340. В остальном работа с такими платами ничем не отличается от оригинальных.

Драйвера чипа CH340 для разных операционных систем:

Эти драйвера подходят не только для китайских ардуино UNO, но и для любой другой ардуине на базе CH340 — NANO, MEGA и т.п.

Инструкция по установке драйвера CH340 на Windows

Этот метод проверялся на Windows XP и Windows 7, но должен также работать на Windows 10 и т.п.

Если драйвер для CH340 не был предварительно установлен на Windows, то сразу после подключения вашей платы Arduino UNO с чипом CH340 к компьютеру/ноутбуку через USB-кабель в списке устройств (Device manager) будет обнаружено новое USB-устройство USB2.0-Serial (как показано на рисунке). Восклицательный знак указывает на то, что драйвер для устройства не установлен.

Поэтому скачиваем драйвер CH340 для Windows отсюда , если вы это еще не сделали, и распаковываем архив куда-нибудь.

В распакованном архиве находим файл CH341SER.EXE и запускаем его. Появится такое окошко:

Здесь, естественно, нажимаем INSTALL , чтобы установить драйвер на компьютер (или UNINSTALL, если наоборот нужно удалить драйвер с компьютера).

После установки драйвера в списке устройств, а точнее в разделе порты COM & LPT вы увидет устройство USB-SERIAL CH340 (COM19) — это и есть ваша плата ардуина, подключенная через USB-порт, но работать она будет в режиме виртуального (последовательного) COM-порта.

То есть теперь вы можете использовать разные программы для работы с COM-портами, чтобы обмениваться сообщениями с вашей ардуиной. Это удобно, так как программировать USB-порт гораздо сложнее. Номер COM-порта в нашем случае определился как 19, но, вообще говоря, он может быть любым (из сводобных). Так что если номер COM-порта будет другим, то ничего страшного — всё должно работать.

Если устройство не было ображено, то возможно надо перезагрузить винду.

Инструкция по установке драйвера CH340 на Linux

На свежих линуксах ничего устанавливать не надо, всё работает из коробки. Тем не менее драйвер также имеется и его можно скачать здесь .

Инструкция по установке драйвера CH340 на Mac OS

Платы ARDUINO по низкой цене

Нажми на изображение, чтобы заказать в интернет-магазине:

Now 14.07.23 23:00:02, Your IP: 95.143.190.109; arduino.zl3p.com/basic/13_ch340
ePN

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

A One-Stop driver repo for the popular serial chip used on cheap Chinese Arduino clones.

License

DecaturMakers/CH340_drivers-Linux-Mac-Windows

This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Sign In Required

Please sign in to use Codespaces.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

CH340 serial chip Drivers for Linux, Mac, and Windows all in one place

A One-Stop driver repo for the popular serial chip used on cheap Chinese Arduino clones.

The CH340G chip is a very popular USB to Serial chip used in Arduino clones because of its low cost. The OEM of this chip is Jiangsu Qinheng Co., Ltd. in the Nanjing Software Valley of China according to SparkFun who builds products that incorporate it.

Unfortunately, their website, being entirely in Chinese, makes many people nervous. For this reason, there have been many people who have tried to be helpful by hosting a copy of the drivers on a more inviting site. However, that is a dangerous thing to be comfortable with. As a Maker Space that regularly teaches microprocessor hacking to beginners, Decatur Makers has decided to host yet another copy of these drivers. You may or may not trust us as a source, but we didn’t feel safe sending our students elsewhere. We have done (and continue to do) everything in our power to verify and maintain the content of this repo.

The driver for this chip has been in the Linux Kernel for a long time. (Introduced in commit 6ce76104 that was released in Linux Kernel v2.6.24 Jan 24 2008) If your Kernel does not support this chip, you are probably very out of date and have severe vulnerabilities to worry about.

Even though Linux users should never need this, we’re going to put the information here.

1. Download the zip of this repo and unzip it
2. Change into the directory that was created

cd CH340_drivers-Linux-Mac-Windows/drivers/linux/ 

• Source:
  • http://www.wch.cn/download/CH341SER_LINUX_ZIP.html
  • 5ba92d25345872b3aa72321b8b3bff0067b318a7b630087abb4b762e18df9624 ch34x.c
  • a47d44ae25907741a6f4a9b4e5fefd4f522f91159fe418de125b6eee05200681 CH341SER_LINUX.ZIP

  Warning: Installation for macOS is [now] very simple. The internet is littered with links to unsigned drivers and out of date instructions telling you how to [recklessly] disable macOS security features that are in place to protect you from these kinds of things. Do not follow them! (If you have done this in the past, undo it.)

  I really suggest you install using homebrew. If you do not have brew installed, you should install it. It is the most common way to install things on a Mac that don’t come from Apple’s App Store.

  1. Open the Terminal (use Spotlight to find it if you must)
  2. If you do not have homebrew, install it.

  /usr/bin/ruby -e "$(curl -fsSL https://github.com/Homebrew/install/raw/master/install)" 

  brew tap DecaturMakers/CH340_drivers-Linux-Mac-Windows https://github.com/DecaturMakers/CH340_drivers-Linux-Mac-Windows brew cask install wch-ch34x-usb-serial-driver 

  1. Download the zip of this repo and unzip it
  2. In Finder, navigate to CH340_drivers-Linux-Mac-Windows-master/drivers/macos
  3. Open the file CH34x_Install_V1.4.pkg
  4. Follow the instructions in the installer
  • Source:
    • http://www.wch.cn/download/CH341SER_MAC_ZIP.html
    • 032e85afc2dfeaba6e77637718749e3af381892305c2c02c12d1cd2bb3585bc3 CH34x_Install_V1.4.pkg
    • b190f612b833727b2006f362a835f7e97177b580e45cef253e164202106c48eb CH341SER_MAC.ZIP
    1. Download the zip of this repo and unzip it
    2. In Windows Explorer, navigate to CH340_drivers-Linux-Mac-Windows-master/drivers/windows
    3. Run either the 64bit or 32bit SETUP application
    • Source:
      • http://www.wch.cn/download/CH341SER_ZIP.html
      • 543426ce41c8d5fa42aaa9885f8cd6c1132245a9552ee0e842b2993bae6ed224 CH341SER.ZIP

      About

      A One-Stop driver repo for the popular serial chip used on cheap Chinese Arduino clones.

      Источник