Dstike wifi deauther oled v6

This ESP8266 development board comes with an integrated 18650 charging system, OLED display and a 3 way momentary slide switch.

It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.

Please note that the ESP8266 does only support 2.4GHz.

You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.

Function

Deauther Attack: Disconnect 2.4G WiFi
Deauther Beacon: Create fake networks
Deauther Probe：Confuse wifi trackers
Packet Monitor：Display wifi traffic
CLock：Real Time Clock Adjustable

GPIOs and Hardware info

Display: SH1106 1.3″ OLED
Display SDA: GPIO 5 (D1)
Display SCL/SCK: GPIO 4 (D2)
WS2812b LED: GPIO 15 (D8)
Button Up: GPIO 12
Button Down: GPIO 13
Button Select: GPIO 14
Highlight LED: GPIO 16
RTC: DS3231 (RTC only work when you connect battery)

Breakout Pins:

GPIO-16
GPIO-3(RXD)
GPIO-1(TXD)
GPIO-5(SDA)
GPIO-4(SCL)
GPIO-0
GPIO-2
3.3V
GND
5V

Why did you make it?

I designed this development board especially for Spacehuhn’s great project: ESP8266 Deauther. It has been authorized by him and is officially supported.

Thanks to every customer that leaves feedback! I will keep improving this board.

What makes it special?

Only 80~100mA power usage
Up to 35h of battery life with a 3500mAh 18650 cell
Charging current: 1A
Included 8dB antenna
Included 2 acrylic case
7 GPIO breakouts and 3.3 and 5V output
4 LEDs to indicate battery status in real time
Power button: Click to turn on, double click to turn off
Protection: short, over charging, over discharging, temperature, polarity
Added RTC DS3231
Added Highlight LED controlled by GPIO16

Disclaimer

This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes. Bugs can occur!

Use it only against your own networks and devices! Please check the legal regulations in your country before using it. We don’t take any responsibility for what you do with this program.

More Info

Deauth

Closes the connection of WiFi devices by sending deauthentication frames to access points and client devices you selected. This is only possible because a lot of devices don’t use the 802.11w-2009 standard that offers a protection against this attack. Please only select one target! When you select multiple targets that run on different channels and start the attack, it will quickly switch between those channels and you have no chance to reconnect to the access point that hosts this web interface.

Beacon

Beacon packets are used to advertise access points. By continuously sending beacon packets out, it will look like you created new WiFi networks. You can specify the network names under SSIDs.

Probe

Probe requests are sent by client devices to ask if a known network is nearby. Use this attack to confuse WiFi trackers by asking for networks that you specified in the SSID list. It’s unlikely you will see any impact by this attack with your home network.

Videos

No country selected, please select your country to see shipping options.

No rates are available for shipping to .

Enter your email address if you’d like to be notified when DSTIKE WiFi Deauther OLED V6 can be shipped to you:

Thanks! We’ll let you know when the seller adds shipping rates for your country.

Rates to

Review Breakdown

Average Ratings

Everything is here

Got is easily, fast shipping ordered a order 1 week before and it’s still not in the ups system you shipped asap and everything came as said easy set up would but again and I appreciate the code for my next buy! Thank you again and keep up the great work

Ravi de mon achat, jusqu’à ce qu’il prenne feu le lendemain

Le paquet a été envoyé très rapidement (10 jours entre la commande et la réception), dans un emballage très soigné.
Aucune documentation n’est présente cependant, il faut aller voir sur le projet github.

Un mosfet sur le PCB a pris feu après avoir débranché l’appareil du secteur, endommageant gravement la plaquette, l’écran, et rendant l’appareil inutilisable.
Le conseil donné : ponter 2 points (brulés dans l’affaire et donc non récupérables) ou acheter un mosfet pour le remplacer également impossible car les points ont brûlé la plaquette).
Heureusement, j’ai tout le nécessaire pour souder à la maison.

J’attends de voir comment évolue la prise en charge.

DSTIKE V6

Καταπληκτικό προϊόν ! Κανει την δουλειά του τέλεια και μου είναι πολύ χρήσιμο στην δουλειά μου. Πραγματικά οταν εκανα την παραγγελία
ήμουν πολύ επιφυλακτικός για το ποσό αξιόπιστο θα είναι το DSTIKE αλλά οταν το δούλεψα έμεινα έκπληκτος. Επίσης πιστεύω πως αν στο πακέτο περιείχε και μπαταρία θα ηταν ακομα καλύτερα. Επίσης χρόνος αποστολής ήταν πραγματικά πολύ γρήγορος και έκανα την παραγγελία μου αρχές Νοεμβρίου όπου μεσολάβησαν και η γιορτές τον Χριστουγέννων. Η παραγγελία μου άργησε όταν έφτασε στην χώρα μου μόνο ( ΕΛΛΑΔΑ ) γιατί εδω στην Ελλάδα πανε με αργούς ρυθμούς. Σας ευχαριστώ πολύ όλους σας.

Θα ήθελα να ρωτήσω κατι ομως

1 )Αγόρασα 1 μπαταρία ANSMANN rechargeable Li-ion 18650 3.7V 2600mAh είναι αξιόπιστη; η θα πρέπει να αγοράσω μια με ποιό πολλά mAh?

2) παρατήρησα πως έχει 3 επιλογές οταν κάνεις επίθεση 1 ) deather 2) beacon 3) probe

Η πρώτη επιλογή κάνει επίθεση στα δίκτυα η δεύτερη δημιουργεί αντίγραφα απο τα δίκτυα και την τελευταία επιλογή ( probe ) δεν εχω καταλάβει τι κάνει και πως δουλεύει αν μπορεί κάποιος να με βοηθήσει θα ήμουν υπόχρεος.

Σας ευχαριστώ πολύ όλους συγγνώμη για το μεγάλο κείμενο συνεχίστε να κάνετε τέλεια δουλειά και να μας προσφέρετε τέλεια gadgets

Читайте также: Сеть вещания wi fi

Με πολύ αγάπη John Mossos from Greece

Works great! Documentation lacking tho

Product works great! Tested it out and to my expectations I kicked everyone off my wifi hahaha. Only downside is that it didn’t come with any documentation but with enough messing around it was quiet simple to figure out how it works.

Order not received / no communication

I have not received the order. It has been stuck with DHL since 11/20/2019. I contacted the seller who said, «just wait».

Great product! Even better price!

I already had a slightly different deauther from the same vendor, which I liked quite a lot, but wanted to get the built-in battery holder, case, etc. The case goes together very easily, although it does block some components — you can’t really connect or disconnect an antenna with the case on, and one of the standoffs also blocks the optional (but included, if you want to solder it on) external battery plug. Which I wasn’t going to use anyways, but it bears mentioning in case other people were. The 8dBi flat PCB antenna isn’t terribly impressive in its performance, but it’s a lot better than the onboard chip antenna, and it adheres nicely to the underside of the case and sits flat. If you’re gonna be reflashing it with your own firmware or something, you’re probably going to want to leave the top of the case off so you can access the FLASH and RST buttons. In fact, it’s a tidy little unit even if you don’t use the top part of the case at all, just watch out for the flat flex cable from the display. The battery level display LEDs (which are always on) is REALLY BRIGHT, but hey, you’ll never wonder how much power you have left. In terms of functionality, excellent, just like with every deauther product this vendor sells. Very highly recommended, and it also detects deauth attacks in packet monitor mode (the RGB LED turns red), which wasn’t mentioned on the product page but which is a great feature both in the field for network security and also to test whether other devices are working properly. The ESP8266 can tends to get a little warm at greater than 120 packets per second in deauth mode, but if you notch the top of the case a bit you can put a basic self-adhesive heatsink on (like the kind that come with Raspberry Pis) and it cools down very well.

Источник