E invalidarg 0x80070057 virtualbox kali linux

Deal with Error Result Code: e_invalidarg (0x80070057)

A virtual machine is a free software for running multiple operating systems on the computer. It allows for running multiple OS on a single disk. You can setup and operate a variety of virtual machines on your hardware including Windows, Linux, macOS, Solaris etc.VirtualBox can be installed in all of the following operating systems: Windows, Linux, macOS and Solaris.

You can run many operating systems on a virtual machine for free. However, after you start a virtual machine, you may come across an error message Result Code: e_invalidarg (0x80070057).

If you are currently dealing with this issue and seek a solution, then this article is for you.

What is result code: e_invalidarg (0x80070057) error?

When attempting to run a virtual machine in VirtualBox on the Windows operating system you are presented with an error message that says failed to import appliance, result code: e_invalidarg (0x80070057). The problem is most likely caused by your inability to access the storage drive and execute the VM you installed. There can be other reasons for this as well.

When you come across this error on your Virtual Machine, you can’t access and import it on VirtualBox. To avoid the message failed to import appliance result code: e_invalidarg (0x80070057)in the first step, make sure you allocate sufficient storage and your storage disk is in good shape. Doing so can help you avoid this issue to a great extent.

What causes result code: e_invalidarg (0x80070057)?

A common complaint among VirtualBox 6.1 users for Windows 10 is the error code: 0x80070057. Running virtual machine on VirtualBox in Windows often cause this error. The problem is caused when there is no adequate RAM and storage allocation for the VM. When your VirtualBox can’t import a VM that you are trying to run.

In case you have Hyper-V enabled and Windows Hypervisor Platform set disabled, this error message appears. In order for your computer to run the VirtualBox application, it must have supported hardware virtualization. If your computer doesn’t support hardware virtualization, then it’s highly likely to come across this error. In order to fix the failed import appliance error, you need to remove virtual machine files and reinstall.

Things to check before you try fixes for e_invalidarg (0x80070057)

Fix for this error is not effective unless you have followed certain steps beforehand. Many Windows users get the result code: e_invalidarg (0x80070057) error when working with VirtualBox. Follow the process outlined below to avoid receiving Error Code: e_invalidarg (0x80070057).

• Click the Windows start menu and type «features» into the search bar. You will find Windows features in the Control Panel.

• If you are running Windows 10, you must disable Hyper-V if presented with the error code e_invalidarg (0x80070057). To disable the Hyper-V, keep the box against it unmarked.

• To make your Virtual Machine is active, you need to first choose the Virtual Machine Platform by clicking the box against it.
• After choosing and enabling the Virtual Machine Platform, you need to disable the Windows Sandbox by keeping the box against it unmarked. Also, enable the Windows Hypervisor Platform by ticking the box against it.
• Now click the OK button at the bottom of the Windows Features screen to save the settings.

• From your Windows start menu, open the Windows PowerShell in admin mode.
• After opening, you need to type the following command in the PowerShell.

bcdedit /set hypervisorlaunchtype off

• As one troubleshooting measure, try starting your PC and launching VirtualBox. Run your VM again to see if there is a notification error with the message «failed to import appliance». This should help solve the issues because it works for most users.

After following the above method, if you are still receiving the same error, then you should follow our method. It’s one of the most effective methods to deal with this issue.

How to fix result code: e_invalidarg (0x80070057) error

If your error still exists then there is a simple method for solving your issue. I will guide you through the stepwise process to solve the e_invalidarg (0x80070057) error. Please follow the steps given below.

• If you are facing the error code: e_invalidarg (0x80070057), you need to close the VirtualBox and open the file manager. Once you are in the file manager, you need to go to C drive and select the currently active user. Now go to VirtualBox VMS.

• When you are in the VirtualBox VMs folder, you will find the folder of Virtual Machine you’re trying to run and getting the error from. You need to delete this folder.

• After deleting the folder of Virtual Machine giving error, you need to download the Vbox file of Operating System for VirtualBox. Your might vary from the example given below. In this case, the Vbox file is for kali linux. After download, you need to find the folder having .ova extension. When located, extract the folder. You can use a zip file extractor for this. We will be using the .vmdk format file that can be found from the folder that you just extracted.

• Now you need to open VirtualBox and navigate to the Machine menu at the top of the window. A dialog box will appear asking you to name your virtual machine. You need to name your virtual machine and leave the folder as it is. After that, you need to select the Operating System type and version. You can click the Next button now.

• After the Name and Operating System window, you’ll move to the Hard disk screen where you’ll need to decide the size of the disk. Here, you need to set the size to 4096 MB. Now make sure that you select the Use an existing virtual hard disk file option. When you select this option, you’ll need to add the find and select the extracted .vmdk file.
• Once you have selected the .vmdk file from the extracted folder, you should click the Create button at the bottom of the screen to create your Virtual Machine.

• Now you can and should try running your Virtual Machine. If everything is done correctly, you shouldn’t come across the error Your code: e_invalidarg (0x80070057) on VirtualBox.

With a Virtual Machine, you can run multiple OS on a single host. It allows you to do tasks that can’t be done on a specific Operating System only. To create and run virtual machines, you need to use VirtualBox. If you come across an error like result code: e_invalidarg (0x80070057) while running your VirtualBox, it makes your experience poor.

By following the above methods, you can fix this error.

Conclusion

When using VirtualBox and trying to run your Virtual Machine, it’s common to come across error Result code: e_invalidarg (0x80070057). The article explained a few ways to deal with this issue and get rid of it.

You can use one or more of the above methods to get rid of this error. In case you don’t find the solution working for you, then you may have a complex underlying problem. In this case, you need to get professional help or seek deeper knowledge of VirtualBox or Virtual Machine to deal with the issue.

FAQs

1. What does result code E_Invalidarg 0x80070057 mean?

When you’re running VirtualBox on a Windows system, it’s common to come across failed to import appliance result code: e_invalidarg (0x80070057). The typical reason behind this error is that Windows is unable to access the system’s SSD or HDD.

2. How do I fix failed import appliances?

You need to deal with the reasons resulting in failing to import appliances. The reason might be corrupted image file, limited administrative privileges for vboxmanage.exe.,corrupted VirtualBox installation, and so on.

3. What is a OVA file?

It’s a file that contains the compressed version of a virtual machine. You need to extract the files from an OVA file.

What’s Wrong with Mac

• Recover my trashed files.
• Recover deleted files on Mac.
• 3 ways to restore Mac photos.
• Recover SD card files on Mac.
• How to Unsend iMessage on Mac?
• Get files from external drive.

• Fix grey screen at startup.
• Ethernet issues occur | Fixed.
• Mac won’t shut down. Boot it.
• Solve flashing question mark.
• Fix slow WiFi after upgrade.

• Format your USB drive.
• Delete APFS partition.
• How to format APFS drive.
• What can be cleaned on Mac.
• Format external hard drive.

• Boot Mac into Recovery mode
• Create a Mac recovery USB.
• Create a Mac recovery disk.
• Resize APFS container.
• Install Mac on external drive.

Источник

Virtualbox can NOT mount an USB drive

I have been dealing with this issue for a few hours now, here is your solution:

• Windows — Right click on Oracle VirtualBox and ‘Run as administrator’.
• Linux — Open a terminal and open Oracle VirtualBox as root (ie. ‘sudo virtualbox’)
• Mac — Do the Apple equivalent of running a program as an administrator (I have absolutely no knowledge of Apple products).
• Once you have Oracle VirtualBox running as administrator, root, etc.. go ahead and create a USB filter as instructed by Nanobrains and vvlevchenko.

This process worked for me on Windows 8.1, I would hope that this process would work in virtually any environment.

the filter works.. as the vm starts the usb device is disconnected from host but fails to attach to guest (latest vbox 6.1)

Please try to create USB filter in VBox GUI and physically re-attach USB hard drive.

I created the USB filter, and re-tried now, but still the same. Basically, what I did was, after I created the USB filter for it, I removed the USB cable and plug it again onto my Windows host machine — Is this what you wanted me to try by ‘re-attach’?

same here.. it disappears from windows and then vbox says it can’t attach it. and it’s just a pendrive.

I have faced this problem very often with the virtual box. Go to settings page on your virtual box, go to USB, and add the USB filter, when you try adding the filter, it will show you a drop down of the USB devices connected to your laptop, choose one and add it. Once it is attached to your virtual Box, you will no longer be able to see it on your windows once you run your virtual machine. On closing the virtual machine, The USB drive appears back on the host machine.

My setup is Debian 9 x64 Host with Windows 7 Ultimate x86 Guest — VirtualBox 6.0

There were no errors being reported by my system — but I could not access or mount my USB drives in the Windows 7 Guest OS.

I tried USB filter editing, udev file editing, and an assortment of other tricks to no avail.

I don’t know if it was necessary, but I closed the Guest OS, and VirtualBox, before executing:

I then rebooted the HOST computer and the USB drives were now accessible. There is no reference in the Oracle Chapter 02 document to solve USB access problems, but it worked on 2 different Machines with the same setup. Guest Add-ons and the proper Ext Pack were already installed — I don’t know if the 2 additions mattered at this point. If you haven’t done so execute this command — it is needed, — it will add your UserName to vboxUsers group.

sudo usermod -a -G vboxusers username 

There is an explanation in the Oracle document instructing the reader to what the rcvboxdrv command performs. These are the steps I used to install virtualBOX 6.0 on my LINUX Host as a reference:

sudo apt-get update echo "deb http://download.virtualbox.org/virtualbox/debian stretch contrib" | sudo tee /etc/apt/sources.list.d/virtualbox.list wget -q https://www.virtualbox.org/download/oracle_vbox_2016.asc -O- | sudo apt-key add - wget -q https://www.virtualbox.org/download/oracle_vbox.asc -O- | sudo apt-key add - sudo apt-get install virtualbox-6.0 

Источник