Epson scan для линукс

Image Scan v3 contains sources covered by the following licenses:

— GNU General Public License
— GNU Lesser General Public License
— EPSON End User Software License

Seiko Epson Corporation reserves the copyright of the binary files which are included in the sources.
These binary files are distributed under SEIKO EPSON CORPORATION SOFTWARE LICENSE AGREEMENT.

This software is distributed free of charge and without warranty.
Seiko Epson Corporation won’t be held liable for any loss or damages that may be incurred as a result of the use of this software.

Image Scan v3 is Linux software for Epson scanners.

Image Scan v3 has own front-end, it allows to set various scanner settings with graphical user interface and save the scanned images to the various file type.
It supports USB and network connection for the network capable scanners.
Scanner can be controlled via not only own front-end but also command line option.

There is no official support provided for this software.

For information regarding scanenr hardware, repairs and replacement parts, please contact your local Epson dealer.

This guide contains information on using Image Scan! for Linux.
For information about your scanner, see the manual shipped with your scanner.
Some screen shots in this guide may be different from yours.
This difference does not change the instructions.
Commands are indicated in fixed width font.

Please install in one of the following ways the downloaded package.

Please run the script (install.sh) included in the downloaded package from terminal.

# ./install.sh

If you cannot install correctly by specifying install script, please refer “README” included in the script.
Also, you can confirm the brief description by specifying the command as below.

# ./install.sh —help

If you installed in command, you must install multiple packages.
Open Terminal, then install the packages in the described order then from the command line.
Note:The following commands needs to be performed as a root privilege.

# rpm —upgrade imagescan-$–$epson4fedora.$.rpm

# rpm —upgrade imagescan-plugin-networkscan-$–$epson4fedora.$.rpm

# dpkg —install imagescan_$–$epson4ubuntu_$.deb

# dpkg —install imagescan-plugin-networkscan_$–$epson4ubuntu_$.deb

Abbreviations used for package representations mean as follows:
$ver : package version
$rel : package release number
$arch : package architecture

*If you want to perform a network scan, you must configure the network-plugin.
Ref：「7. Configuring SANE Network」

You can install the package of this driver software by using package manager.
Note: The following description may be different on your environment.

Double-click the Image Scan! for Linux binary package icon to install it.
If you can find install option by right clicking on the package icon that you have downloaed(.dev / .rpm), you can specify it.

Please run the package installation in the following order.

An error might be occurred during the installation of Image Scan v3.
In that case, try the following workaround.

The package installation order is not correct.

Workaround :

*if your distribution is not supported, try to build from the source fileand install it.

# imagescan depends on libgraphicsmagick3 (>= 1.3.11); however:
Version of libgraphicsmagick3 on system is 1.3.5-6.
# imagescan depends on libjpeg8 (>= 8c); however:
Package libjpeg8 is not installed.

For example, if you install from the command line, the above error is displayed.
Try again installation of image scan v3 after you have installed the missing package(s) that indicated in red characters as below.

# yum install libgraphicsmagick3

# yum install libjpeg8

# zypper install libgraphicsmagick3

# zypper install libjpeg8

# apt-get isntall libgraphicsmagick3

# apt-get isntall libjpeg8

You can uninstall the package of this driver software by using package manager, etc. Or you can also uninstall this software package by opening a terminal and using command lines input.
Note: The following commands needs to be performed as a root privilege.

# rpm -e imagescan-plugin-networkscan

# rpm -e imagescan

# dpkg —remove imagescan-plugin-networkscan

# dpkg —remove imagescan

You can scan an image with Image Scan! for Linux using the following steps.

Make sure the scanner and the computer connected to the scanner are turned on.
Place a document on the scanner. See the user’s guide of the scanner.
Run Image Scan v3 on your computer.
See “6.4. Running Image Scan v3”.
The main window appears.
If model of multiple is connected to the computer, select the scanner.
(If only one model is connected, you do not require to select.)
See “6.4.3. Select scanner”.
Press the button on the right top of the main window.
Setting items corresponding to the button will be displayed.
Make settings such as document source, image type, and resolution.
See “General settings”»Geometry settings»»Enhancement settings»»Other settings»
If you want to confirm preview image, click the Refresh button to preview the full page.
See “Refresh button”
Click the Scan button to start the image capture.
You must specify a file name and directory.
Select the extension of image format you want to save.
See “Scanning an Image”

You can start Image Scan v3 either from the command line or .

At the command prompt, specify the following command to start Image Scan v3.

$ imagescan

If more than one scanner are connected to the network, select a scanner you want to use.
See «6.4.3. Select scanner»

Select the icon of «Image Scan» in the menu.
Note: Menu depends on your environment.

If more than one scanner are connected to the network,
item at the top left of main window is displayed as «Select a device».
Select a scanner you want to use.

The main window allows you to make the following settings.

Press the button on the top right of the main window. Setting items corresponding to the button will be displayed.
[General] and [Geometry] are displayed by default at startup.
When you do not need item, you can switch to non-display by pressing again the button at the top right.

Zoom in :

Zoom out :

Normal size :

Best fit :

Calibration :
Start calibration.

When you click on the Scan button, the following window is displayed.
Specify the directory.
Specify the extension of the file format in the file name.
Start scanning to click the save button, then the image is saved. When you want to stop scanning, click the cancel button.

[Document Source]
Select the Document Source from the following choices.
Flatbed :
Select Flatbed to scan reflective document.
ADF :
elect ADF — When using the ADF (Auto Document Feeder) to load your documents.

*In the case of duplex-ADF supported model, the check box of Duplex can be selected.

[Image Type]
By selecting the image type, color of the image to capture is set.
Color (8 bit) :
Scanning at Color(8-bit for each R/G/B channel)
Gray (1 bit) :
Scanning at Monochrome
Gray (8 bit) :
Scanning at 8-bit grayscale

[Resolution]
Select resolution setting.
*The available resolution settings depend on the connected scanner.

[Blank Image Threshold]
Adjust the threshold to be used for Blank Image Threshold.
Blank image skip is OFF when the 0.
Other values, do the blank image skip, depending on the threshold.

[Brightness]
Adjust the brightness of the image.
Value range : -100(Dark)~+100(Bright) (Increments of 1)

[Contrast]
Adjust the contrast of the image.
Value range : -100(Low)~+100(High) (Increments of 1)

[Crop]
This setting automatically determines the size of your documents and scans them in an appropriate size.
-[Crop] can be selected only when the ADF is set to the document source.
-[Crop] can be selected only when these features are supported.

[Deskew]
Detects the skew of the original images and corrects them.
-[Deskew] can be selected only when the ADF is set to the document source.
-[Deskew] can be selected only when these features are supported.

[Dropout]
Select the dropout color.
— None
— Blue (1 bit)]
— Blue (8 bit)]
— Green (1 bit)]
— Green (8 bit)]
— Red (1 bit)]
— Red (8 bit)]

[Threshold]
Set the threshold of monochrome scanning.
*When the Image Type is selected to Color(8 bit) or Gray(8bit), [Threshold] does not affect the output result even if adjusting the value.

[Detect Double Feed]
Set the setting for Detect Double Feed.
Off

Normal :
For document of standard thickness.
Sensitive :
For document of thin thickness.
— [Detect Double Feed] can be selected only when the ADF is set to the document source.
— The Detect Double Feed (Paper Thickness) option is only available when connecting the scanner that supports this feature.

[Transfer Format]
Select image transfer format from the scanner.
JPEG
RAW

— [Transfer format] is only available when connecting the scanner that supports this feature.
— [Transfer format] is different from the image file format to be saved.

This chapter explains how to set the connection from Image Scan! for Linux to a scanner that is directly attached to the network.
By using the network plug-in, you can connect to a scanner that is directly attached to the network.
Please note that scanning over the network is only supported in a client/ server setup.
Scanners directly attached to the network are not supported.

Connect the scanner to the network and set the IP address.
For information on how to set the IP address, refer to the user manual shipped with your scanner.
Please edit /etc/imagescan/imagescan.conf file by using root privileges as below.
Example:

[device]
net.udi = networkscan:esci://[IP address]:[Port number]
net.vendor = Epson
net.model = DS-XX00
net.name = My Network Scanner

vendor : Vendor name on Main Window.
model : Model name on Main Window.
name : If you want to change the display name, specify this item.
If this item is not specified, vendor+model is displayed.

*[Port number] must be set to 1865
*vendor / model / name = optional items

exp) When the IP address is xxx.yyy.zzz.www, specify as follows.

net.udi = networkscan:esci://xxx.yyy.zzz.www:1865

Image Scan v3 can capture image from the command line ([Main] window is not displayed).
About available options, refer to help that is displayed when specifying the following command.

Источник

Epson scan для линукс