Fibre channel driver linux

Fibre channel driver linux

Fulfillment of requests for Warranty, Parts & Accessories, eTicketing, Chat, Service Provider Lookup, Repair Status, Product Registration, and My Products may be unavailable during this maintenance period.
If you need immediate technical support during this scheduled maintenance you may call your local Customer Engagement Center.
We apologize for any inconveniences this may cause.

Dear Lenovo India Customer,
Due to the rise in COVID-19 cases across the country, different locations have announced varying levels of restrictions. While we shall try our best to deliver service to our usual high standards, these restrictions, along with the necessary safety protocols, could impact our ability to complete your repair.
Additionally, if you are planning to visit a local service centre, we strongly recommend you contact them first and confirm their availability.

PÉRIODE D’ENTRETIEN
15 juillet 2023 2:00 UTC ~ 16 juillet 2023 1:00 UTC
L’utilisation des fonctions suivantes pourrait être affectée pendant cette période: l’accès à l’information sur la garantie de votre appareil, la recherche de pièces et d’accessoires, la soumission de demande de service, le clavardage, la recherche de centre de service, l’état d’une réparation en cours, le téléchargement de logiciels et systèmes d’exploitation, certaines options de communications, l’enregistrement de produits et l’accès à votre liste de produits dans votre profil Lenovo.

Pour de l’assistance technique immédiate, prière de nous joindre par téléphone.
Nous sommes désolés de tout inconvénient que cette période d’entretien pourrait vous causer.

예정된 웹 사이트 유지 보수
기간 : 2023년 7월 15일 2:00 UTC ~ 2023년 7월 16일 1:00 UTC
보증, 부품, 액세서리 주문, 전자 티켓, 서비스 조회 (상업), 수리 상태, 제품 등록,이 유지 보수 기간 동안 내 제품을 사용하지 못할 수 있습니다.
불편을 드려 죄송합니다.

官網維護通知
維護時間自2023年7月15日 2:00 UTC ~ 2023年7月16日 1:00 UTC
官網維護期間,產品序號及保固查詢功能將暫停使用
受影響範圍包含:保固資訊查詢,下載應用程式,系統還原服務以及聯繫方式查詢
如果您需要技術支援服務,請於正常服務時間使用Lenovo Line Chat服務 (官方帳號請搜尋 :Lenovo 台灣客服或搜尋ID:@lenovo_service_tw) 取得線上即時支援服務
官網維護期間照成您的不便,敬請見諒

MANUTENÇÃO PROGRAMADA DO SITE
DO DIA 15/7/23 ÀS 2AM (UTC) ATÉ O DIA 16/7/23 ÀS 1AM (UTC).
O atendimento para solicitações de garantia, peças e acessórios, eTicketing, chat, status de reparo, registro de produto e afins pode não estar disponível durante este período de manutenção. Se você precisar de suporte técnico imediato durante essa manutenção programada, acesse nosso canal no You Tube: Lenovo Suporte. Pedimos desculpas pela inconveniência.

Читайте также:  Linux fsck unexpected inconsistency run fsck manually

El cumplimiento de las solicitudes de garantía, piezas y accesorios, emisión de tickets electrónicos, chat, búsqueda de proveedores de servicios, estado de reparación, registro de productos y Mis productos puede no estar disponible durante este período de mantenimiento.
Si necesitas soporte técnico inmediato durante este mantenimiento programado, puedes llamar a nuestro Contact Center.
Pedimos disculpas por cualquier inconveniente que esto pueda causar

MANUTENZIONE PROGRAMMATA DEL SITO
15 luglio 2023 2:00 UTC ~ 16 luglio 2023 1:00 UTC
Le funzioni di Garanzia, Ricambi & Accessori, eTicketing, Chat, Stato di Riparazione, Registrazione del Prodotto e accessi ai Miei Prodotti potrebbero non essere disponibili durante questo periodo di manutenzione.
Se hai bisogno di supporto tecnico immediato durante questa manutenzione programmata, puoi chiamare il Centro di Assistenza locale.
Ci scusiamo per eventuali disagi.

(Standard) GEPLANTE STANDORTWARTUNG
15. Juli 2023 2:00 UTC ~ 16. Juli 2023 1:00 UTC
Die Erfüllung von Anfragen bezüglich Garantie, Teile und Zubehör, eTicketing, Chat, Dienstleistersuche, Reparaturstatus, Produktregistrierung und Meine Produkte wird während dieses Wartungszeitraums möglicherweise nicht verfügbar sein.
Wenn Sie während dieser geplanten Wartung sofortigen technischen Support benötigen, können Sie Ihr lokales Kundenkontaktcenter anrufen.
Wir entschuldigen uns für eventuelle Unannehmlichkeiten, die dadurch entstehen können.

Источник

Fibre channel driver linux

Feedback

Installing the Red Hat or SUSE Linux Drivers

After you download the drivers, as described in Downloading the Red Hat or SUSE Linux Drivers, you can install the drivers by following the steps in these sections:

To Build the Fibre Channel Driver

The driver installation makes extensive use of the build.sh script, which is located in driver source (extras/build.sh).

From the source code, you can build a qla2xxx.ko module and a qla2xxx_conf.ko module for the host. You can then choose to load the driver manually or automatically, as described in To Load the Newly Built Fibre Channel Driver.

    In the directory that contains the source driver file, qla2xxx-x.yy.zz-dist.tgz, use the commands shown in the following example.

# tar -xvzf *.tgz # cd qlogic # ./drvrsetup (this extracts the source files directory into the current directory) # cd qla2xxx-x.yy.zz (x.yy indicates the driver version; zz indicates the file extension, which is typically .ko for kernel modules (binaries)).
# ./extras/build.sh install 
  • Builds the driver .ko files.
  • Copies the .ko files to the appropriate directory: /lib/modules/2.6. /kernel/drivers/scsi/qla2xxx
  • Adds the appropriate directive in the modprobe.conf. local to remove the qla2xxx_conf module when unloading the qla2xxx module.
  • Updates the newly built qla2xxx_conf.ko module with any previously saved data in /etc/qla2xxx.conf.
Читайте также:  How to boot linux kernel

To Load the Newly Built Fibre Channel Driver

  • After you build the Fibre Channel driver, as described in To Build the Fibre Channel Driver , perform one of the following procedures:
    • To Manually Load the Fibre Channel Driver
    • To Automatically Load the Fibre Channel Driver

    To Manually Load the Fibre Channel Driver

    After building the Fibre Channel driver, you can choose to manually load the driver. If you want to automatically load the driver, skip to To Automatically Load the Fibre Channel Driver.

    1. Build the driver binary, as described in To Build the Fibre Channel Driver .
    2. Manually load the driver by using the modprobe -v command.
    # modprobe -r qla2xxx # modprobe -r qla2xxx_conf (for use only with the SANsurfer FC HBA CLI utility)

    To Automatically Load the Fibre Channel Driver

    After building the Fibre Channel driver, you can choose to automatically load the driver. If you want to manually load the Fibre Channel driver, see To Manually Load the Fibre Channel Driver.

    1. Build the driver binary, as described in To Build the Fibre Channel Driver .
    2. Install the driver module (*.ko) files to the appropriate kernel module directory.
    # ./extras/build.sh install 
    • alias scsi_hostadapter1 qla2xxx_conf (for use only with SANsurfer FC HBA CLI)
    • alias scsi_hostadapter2 qla2xxx
    . INITRD_MODULES=". qla2xxx_conf qla2xxx" .
    # cp -f initrd-2.6.kernel-version.img initrd-2.6.kernel-version.img.bak 
    Red Hat: # mkinitrd -f initrd-2.6.kernel-version.img kernel-version SUSE: # /sbin/mk_initrd 

    To Build and Load the Ethernet HBA Driver

    # rpmbuild --rebuild sun-pci-e-dual-gigabit-kernel-6.1.5.src.rpm 
    # cd /usr/src/redhat/RPMS/arch 
    # rpm -ivh sun-pci-e-dual-gigabit-kernel-6.1.5.rpm 

    Copyright © 2011, 2012, 2013, 2014, 2105, Oracle and/or its affiliates. All rights reserved. Legal Notices

    Источник

    Fibre channel driver linux

    Note: During the adapter’s initial install you will need to install the driver before updating the firmware with the latest flash bundle. After the initial install we recommend using the latest version of the ATTO Configuration Tool to update the flash bundle before updating to the latest driver version.

    Driver
    Version
    Description

    macOS driver for Fibre Channel adapters. Download this file to your Mac and double click it to launch the driver installation program. The ATTO CLI Tool is also included and can be used by advanced users to perform additional capabilities and various functions within the adapters. It can be used from a remote system or locally via a terminal application and uses ASCII commands typed while in CLI mode.

    MultiPath Director™ Driver
    Version
    Description
    Flash Bundle
    Version
    Description
    ConfigTool
    Version
    Description
    Driver
    Version
    Description

    Windows driver for Fibre Channel adapters. Download this file to your PC and double click it to launch the driver installation program. The ATTO CLI Tool is also included and can be used by advanced users to perform additional capabilities and various functions within the adapters. It can be used from a remote system or locally via a terminal application and uses ASCII commands typed while in CLI mode.

    MultiPath Director™ Driver
    Version
    Description

    Windows MultiPath Director driver for Fibre Channel adapters. Download this file to your PC and double click it to launch the driver installation program.

    Flash Bundle
    Version
    Description

    Windows flash bundle for Fibre Channel adapters. Download this file to your PC and use the latest version of the ATTO ConfigTool to install the flash bundle on your PC.

    ConfigTool
    Version
    Description
    Driver
    Version
    Description

    Linux driver for Fibre Channel adapters. Download this file to your PC and unzip it. Instructions to install the drivers can be found in the readme files included in the download package. The ATTO CLI Tool is also included and can be used by advanced users to perform additional capabilities and various functions within the adapters. It can be used from a remote system or locally via a terminal application and uses ASCII commands typed while in CLI mode.

    MultiPath Director™ Driver
    Version
    Description

    Linux MultiPath Director driver for Fibre Channel adapters. Download this file to your PC and unzip it. Instructions to install the drivers can be found in the readme files included in the download package.

    Flash Bundle
    Version
    Description

    Linux flash bundle for Fibre Channel adapters. Download this file to your PC and use the latest version of the ATTO ConfigTool to install the flash bundle on your PC.

    Источник

Оцените статью
Adblock
detector