Find all devices connected to wifi

How To Find Devices Connected To Your Wifi Using Smartphone

Let’s admit; the internet has become a part of our lives. These days, we can’t survive without an internet connection. The increased usage of the internet on smartphones has also given rise to WiFi networks. These days, you will find WiFi networks everywhere, like on Office, Movie theaters, Shopping malls, etc.

Even we all have WiFi connectivity at home and workplace. If you have a personal WiFi, then we are pretty sure that you might have dealt with slow internet speed. The sudden slowdown of internet speed indicates that someone might be using your WiFi network. Most of the modern routers allow users to check for connected devices. However, if you don’t know how to use the router admin panel, then you can rely on the apps.

How To Find Devices Connected to your Wifi using Smartphone

There were quite a few Android apps available on the Play Store that lets you find devices connect to the WiFi network. In this article, we are going to share a few best methods that would help you find devices connected to your WiFi using a smartphone.

1. Using Fing – Network Tools

For those who don’t know, Fing is a complete network tool available for Android. With FING, you can analyze any WiFi network. Not only that, but the app also helps you to find devices that were connected to the WiFi.

Step 1. First of all, in your Android device, download and install the app Fing – Network Tools. After installing the app, launch it on your Android device.

Step 2. Now simply scan all the devices that were currently connected to the same wifi network.

Step 3. Now a list of devices will get displayed that are being currently using the same wifi network.

Step 4. You can know details about the connected WiFi devices by tapping on them

That’s it! You are done, now you can check the Mac address of a device and can block it on your router.

Using Wifi Inspector

This is another app that serves the same as Fing. Wifi Inspector is a simple tool to see all the devices connected to the network (both wired and wifi, whether consoles, TVs, pcs, tablets, phones, etc.) are giving relevant data such as IP address, manufacturer, device name and MacAddress.

Step 1. First of all, download and install the app WiFi inspector on your Android device and launch it.

Step 2. Now it will show you the network. Just tap on “Inspect Network” to continue.

Step 3. Now it will scan for the devices that are connected to your WiFi network.

Step 4. Now it will show you the entire list of devices connected to your wifi network.

That’s it! You are done, you can now block the devices by going through your router settings.

Using NetScan

NetScan is another networking scanning tool that’s available on the Google Play Store. The great thing about NetScan is that it can discover connected devices by scanning the port. Not just that, but NetScan can also help you to find network loopholes, vulnerabilities, and open ports.

Step 1. First of all, visit Google Play Store and download NetScan. You can use this link to download & install the app directly.

Step 2. Once done, open the app and grant all permissions.

Step 3. Now, you will see an interface like below. Here you need to tap on the ‘Port Scan’

Step 4. Now NetScan will scan for the connected devices and will list out the devices.

Step 5. If you want to grab details of the connected device, then simply tap on it to get a brief overview.

That’s it, you are done! This is how you can use NetScan to find devices connected to your WiFi on Android.

2. Scanning Connected Devices On iPhone

Step 1. First of all, on your iOS device, download and install the app Fing – Network Tools. After installing the app, launch it on your iPhone.

Step 2. Now simply scan all the devices that are being currently connected to the same wifi network.

Step 3. Now a list of devices will get displayed that are being currently using the same wifi network.

That’s it! You are done, now you can check the Mac address of a device and can block it on your router.

Some other apps that you can use

Just like the above apps, other apps for the same purpose exists. Below, we have shared three best apps to scan devices connected to the WiFi network.

1. Who is on my WiFi

As the name of the app says, Who is on my WiFi is one of the best WiFi scanner app available on the Play Store. The app was mostly known for its attractive user interface. The app effectively scans and finds devices that were connected to the WiFi network.

2. WiFi Scanner & Analyzer

As the name of the app says, WiFi Scanner & Analyzer is another best and top-rated WiFi scanner app on the list. The app serves as a smart way to list all devices that were connected to the personal WiFi hotspot. Apart from that, it also got a network speed test tool that accurately measures your network speed.

3. WiFi Warden

It’s another best WiFi scanner app on the list that can be used to analyze the WiFi network. The Android app tells you about the WiFi signal strength around you. Not only that, but it also tells about the devices that were connected to the WiFi network.

So, these are some of the best WiFi scanner apps available on the Play Store. You can use these apps to find devices that were connected to the WiFi network.

So above is all about How To Check Devices Connected To Your Wifi Using Your Smartphone. I hope you like this, do share it with others too. Leave a comment below if you have any related queries with this.

Источник

How To Find Devices Connected To Your Wifi Network

As we all know, wifi is now used by many people, and almost everyone has a personal wifi connection. However, you don’t have much option to know who’s connected to your Wi-Fi network. So, we will share the easiest way to help you find devices connected to your WiFi network. Could you go through the post to learn about it?

Many people now use Wi-Fi, and almost everyone has their Wi-Fi network. However, sometimes another person knows your password and can use your wifi network, and with that, your bandwidths get divided, and your network speed gets slow. So to overcome this, we have an excellent method to help you check out all the devices currently connected to your wifi network. So have a look at the complete guide below.

Find Devices Connected To your Wifi Network

The method is straightforward and depends on an excellent tool that will work on your PC and scan all the devices connected to your wifi network. Just follow up the below steps to proceed.

Trace All The Devices Currently Connected To Your Wifi

1. First, download and install the excellent tool to scan devices on your Windows PC on a wifi network that is Wireless Network Watcher. Once you install it, you will see the screen below.

2. Now connect to the wifi network where you want to check the connected devices, launch the tool on your PC, and click on Start Scanning.

3. Once you click on Start Scanning, you need to wait for a few seconds until it finishes the search for your connected devices on your Wifi Network.

4. You will now see the list of all the devices with their IP addresses currently connected to your device.

That’s it now; you can check out the owner of that IP address and trace that person.

Using SoftPerfect WiFi Guard

SoftPerfect WiFi Guard will alert you if your network is used without your knowledge. WiFi Guard is a specialized network scanner that runs through your network at set intervals and reports immediately if it has found any new, unknown, or unrecognized connected devices that could belong to an intruder.

1. First, you must download and install SoftPerfect WiFi Guard on your computer and run it.

2. You need to go to File and select the option Settings.

3. Now enable the last three options.

5. If any unrecognized device connects with your WiFi network, it will notify you.

Using Fing IP Network Scanner

You need to download the Fing IP Network Scanner to access the superfast and reliable Network IP and Wi-Fi Analyzer on a Windows Machine. This is not a tool like SoftPerfect Wifi Guard.

This works in a command line that will give you the MAC and IP address of all connected networks. Lets’ know how to use it.

1. First, you must visit Fing.io and download and install Windows- IP Network Scanner on your Windows computer.

2. Once installed, you need to right-click on the Fing from the start menu and then select the option Run as administrator.

3. Now, you will see the screen like below; here, you need to select the option Discover. So, it would help if you typed D and then hit the Enter button.

4. Now, it will ask you to select the network you want to monitor by selecting the assigned letters. Select the web that you want to scan.

5. Now, you will be asked to select how many rounds. Select “1” to continue.

6. Now, you will be asked more questwhetherns like whether you want to discover domawhether names, whether you like the output in Log or text, which format you prefer, etc.; select all according to your wish.

7. After selecting all, you will be asked: “Do you execute it now” here, you need to Type “Y” to continue.

8. Now, it will scan for the network, and you will find the output file on the desktop.

That’s it! You can now see all the connected devices to your Wifi network.

Using Advanced IP Scanner (how to check who is connected to my wifi router)

Advanced IP Scanner is another best tool for several tasks and scanning your network for connections. This mini tool also features remote options to Wake-on-LAN and shutdown, connect via HTTP/FTP and remote control with Remote Desktop and Radmin.

1. First, download and install Advanced IP Scanner on your Windows computer.

2. After Installing the too, you will see the screen below.

3. You need to tap the Scan button to start the scanning process and wait for a few minutes until it finishes.

4. Now, it will show you the list of devices connected to your Wireless network along with your IP Address and MAC address.

To block any connected devices, you need to copy the MAC address and block it by going through your modem settings.

Using Angry IP Scanner

Well, this is another best network scanner for windows which you can use to scan devices connected to your WiFi network. However, it’s worth noting that Angry IP Scanner is Java-based, so it needs Java Runtime Environment to run. This mini tool pings every IP Address in the selected range for a response and then displays devices connected to your WiFi network.

Using Who Is On My WiFi (wireless network watcher)

Well, this is another best wireless network watcher which you can use to identify the computers connected to your network. This tool carries a neat interface and automatically warns you when unknown or unidentified connections are made. This mini tool is available in two versions, free and premium. The Free one lets you scan and find devices on your WiFi Network.

On Android & iOS

Android & iOS also have an app for scanning devices connected to WiFi. The app which we will be using is known as Fing. Fing- Network Tools is available for Android and iOS App Stores and lets users find devices connected to the current WiFi network.

Below, we will share a working method to use Fing to scan devices connected to the Wi-Fi on Android. The same process applies to iOS.

1. First of all, download & install Fing – Network Tools on your Android smartphone. You can get the app from Google Play Store.

2. Next, open the app from your App drawer, and it will ask you to grant a few permissions. Make sure to give all permissions.

3. You will now see the Fing app’s main interface. You need to tap on the Scan to scan all devices connected to the current WiFi network.

4. Wait until the app finishes the Scan. Once done, it will list all devices connected to your WiFi network.

5. If you want to gather more details about the connected device, tap on the IP Address, which will provide you with a more detailed report.

That’s it; you are done! This is how you can use Fing – Network Tools to find connected devices on Android and iOS. If you have any other doubts, then make sure to discuss them with us in the comments.

With this method, you can easily trace all the devices currently connected to your wifi and steal your wifi network. I hope you like this, do share it with others too. Leave a comment if you have any related queries with this.

Источник