- 15 Linux lsof Command Examples (Identify Open Files)
- 1. Introduction to lsof
- 2. List processes which opened a specific file
- 3. List opened files under a directory
- 4. List opened files based on process names starting with
- 5. List processes using a mount point
- 6. List files opened by a specific user
- 7. List all open files by a specific process
- 8. Kill all process that belongs to a particular user
- 9. Combine more list options using OR/AND
- 10. Execute lsof in repeat mode
- Finding Network Connection
- 11. List all network connections
- 12. List all network files in use by a specific process
- 13. List processes which are listening on a particular port
- 14. List all TCP or UDP connections
- 15. List all Network File System ( NFS ) files
- Use of “lsof” Command to Find Open Files
- Use of “lsof” Command to Find the Open Files in Linux Mint 20
- Conclusion
- About the author
- Karim Buzdar
15 Linux lsof Command Examples (Identify Open Files)
lsof stands for List Open Files. It is easy to remember lsof command if you think of it as “ls + of”, where ls stands for list, and of stands for open files. It is a command line utility which is used to list the information about the files that are opened by various processes. In unix, everything is a file, ( pipes, sockets, directories, devices, etc.). So by using lsof, you can get the information about any opened files.
1. Introduction to lsof
# lsof COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME init 1 root cwd DIR 8,1 4096 2 / init 1 root txt REG 8,1 124704 917562 /sbin/init init 1 root 0u CHR 1,3 0t0 4369 /dev/null init 1 root 1u CHR 1,3 0t0 4369 /dev/null init 1 root 2u CHR 1,3 0t0 4369 /dev/null init 1 root 3r FIFO 0,8 0t0 6323 pipe .
- cwd – Current Working Directory
- txt – Text file
- mem – Memory mapped file
- mmap – Memory mapped device
- NUMBER – Represent the actual file descriptor. The character after the number i.e ‘1u’, represents the mode in which the file is opened. r for read, w for write, u for read and write.
TYPE – Specifies the type of the file. Some of the values of TYPEs are,
- REG – Regular File
- DIR – Directory
- FIFO – First In First Out
- CHR – Character special file
For a complete list of FD & TYPE, refer man lsof.
2. List processes which opened a specific file
You can list only the processes which opened a specific file, by providing the filename as arguments.
# lsof /var/log/syslog COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME rsyslogd 488 syslog 1w REG 8,1 1151 268940 /var/log/syslog
3. List opened files under a directory
You can list the processes which opened files under a specified directory using ‘+D’ option. +D will recurse the sub directories also. If you don’t want lsof to recurse, then use ‘+d’ option.
# lsof +D /var/log/ COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME rsyslogd 488 syslog 1w REG 8,1 1151 268940 /var/log/syslog rsyslogd 488 syslog 2w REG 8,1 2405 269616 /var/log/auth.log console-k 144 root 9w REG 8,1 10871 269369 /var/log/ConsoleKit/history
4. List opened files based on process names starting with
You can list the files opened by process names starting with a string, using ‘-c’ option. -c followed by the process name will list the files opened by the process starting with that processes name. You can give multiple -c switch on a single command line.
# lsof -c ssh -c init COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME init 1 root txt REG 8,1 124704 917562 /sbin/init init 1 root mem REG 8,1 1434180 1442625 /lib/i386-linux-gnu/libc-2.13.so init 1 root mem REG 8,1 30684 1442694 /lib/i386-linux-gnu/librt-2.13.so . ssh-agent 1528 lakshmanan 1u CHR 1,3 0t0 4369 /dev/null ssh-agent 1528 lakshmanan 2u CHR 1,3 0t0 4369 /dev/null ssh-agent 1528 lakshmanan 3u unix 0xdf70e240 0t0 10464 /tmp/ssh-sUymKXxw1495/agent.1495
5. List processes using a mount point
Sometime when we try to umount a directory, the system will say “Device or Resource Busy” error. So we need to find out what are all the processes using the mount point and kill those processes to umount the directory. By using lsof we can find those processes.
The following will also work.
6. List files opened by a specific user
In order to find the list of files opened by a specific users, use ‘-u’ option.
# lsof -u lakshmanan COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME update-no 1892 lakshmanan 20r FIFO 0,8 0t0 14536 pipe update-no 1892 lakshmanan 21w FIFO 0,8 0t0 14536 pipe bash 1995 lakshmanan cwd DIR 8,1 4096 393218 /home/lakshmanan
Sometimes you may want to list files opened by all users, expect some 1 or 2. In that case you can use the ‘^’ to exclude only the particular user as follows
# lsof -u ^lakshmanan COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME rtkit-dae 1380 rtkit 7u 0000 0,9 0 4360 anon_inode udisks-da 1584 root cwd DIR 8,1 4096 2 /
The above command listed all the files opened by all users, expect user ‘lakshmanan’.
7. List all open files by a specific process
You can list all the files opened by a specific process using ‘-p’ option. It will be helpful sometimes to get more information about a specific process.
# lsof -p 1753 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME bash 1753 lakshmanan cwd DIR 8,1 4096 393571 /home/lakshmanan/test.txt bash 1753 lakshmanan rtd DIR 8,1 4096 2 / bash 1753 lakshmanan 255u CHR 136,0 0t0 3 /dev/pts/0 .
8. Kill all process that belongs to a particular user
When you want to kill all the processes which has files opened by a specific user, you can use ‘-t’ option to list output only the process id of the process, and pass it to kill as follows
# kill -9 `lsof -t -u lakshmanan`
The above command will kill all process belonging to user ‘lakshmanan’, which has files opened.
Similarly you can also use ‘-t’ in many ways. For example, to list process id of a process which opened /var/log/syslog can be done by
Talking about kill, did you know that there are 4 Ways to Kill a Process?
9. Combine more list options using OR/AND
By default when you use more than one list option in lsof, they will be ORed. For example,
# lsof -u lakshmanan -c init COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME init 1 root cwd DIR 8,1 4096 2 / init 1 root txt REG 8,1 124704 917562 /sbin/init bash 1995 lakshmanan 2u CHR 136,2 0t0 5 /dev/pts/2 bash 1995 lakshmanan 255u CHR 136,2 0t0 5 /dev/pts/2 .
The above command uses two list options, ‘-u’ and ‘-c’. So the command will list process belongs to user ‘lakshmanan’ as well as process name starts with ‘init’.
But when you want to list a process belongs to user ‘lakshmanan’ and the process name starts with ‘init’, you can use ‘-a’ option.
# lsof -u lakshmanan -c init -a
The above command will not output anything, because there is no such process named ‘init’ belonging to user ‘lakshmanan’.
10. Execute lsof in repeat mode
lsof also support Repeat mode. It will first list files based on the given parameters, and delay for specified seconds and again list files based on the given parameters. It can be interrupted by a signal.
Repeat mode can be enabled by using ‘-r’ or ‘+r’. If ‘+r’ is used then, the repeat mode will end when no open files are found. ‘-r’ will continue to list,delay,list until a interrupt is given irrespective of files are opened or not.
Each cycle output will be separated by using ‘=======’. You also also specify the time delay as ‘-r’ | ‘+r’.
# lsof -u lakshmanan -c init -a -r5 ======= ======= COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME inita.sh 2971 lakshmanan cwd DIR 8,1 4096 393218 /home/lakshmanan inita.sh 2971 lakshmanan rtd DIR 8,1 4096 2 / inita.sh 2971 lakshmanan txt REG 8,1 83848 524315 /bin/dash inita.sh 2971 lakshmanan mem REG 8,1 1434180 1442625 /lib/i386-linux-gnu/libc-2.13.so inita.sh 2971 lakshmanan mem REG 8,1 117960 1442612 /lib/i386-linux-gnu/ld-2.13.so inita.sh 2971 lakshmanan 0u CHR 136,4 0t0 7 /dev/pts/4 inita.sh 2971 lakshmanan 1u CHR 136,4 0t0 7 /dev/pts/4 inita.sh 2971 lakshmanan 2u CHR 136,4 0t0 7 /dev/pts/4 inita.sh 2971 lakshmanan 10r REG 8,1 20 393578 /home/lakshmanan/inita.sh =======
In the above output, for the first 5 seconds, there is no output. After that a script named “inita.sh” is started, and it list the output.
Finding Network Connection
Network connections are also files. So we can find information about them by using lsof.
11. List all network connections
You can list all the network connections opened by using ‘-i’ option.
# lsof -i COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME avahi-dae 515 avahi 13u IPv4 6848 0t0 UDP *:mdns avahi-dae 515 avahi 16u IPv6 6851 0t0 UDP *:52060 cupsd 1075 root 5u IPv6 22512 0t0 TCP ip6-localhost:ipp (LISTEN)
You can also use ‘-i4’ or ‘-i6’ to list only ‘IPV4’ or ‘IPV6‘ respectively.
12. List all network files in use by a specific process
You can list all the network files which is being used by a process as follows
You can also use the following
The above command will list the network files opened by the processes starting with ssh.
13. List processes which are listening on a particular port
You can list the processes which are listening on a particular port by using ‘-i’ with ‘:’ as follows
# lsof -i :25 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME exim4 2541 Debian-exim 3u IPv4 8677 TCP localhost:smtp (LISTEN)
14. List all TCP or UDP connections
You can list all the TCP or UDP connections by specifying the protocol using ‘-i’.
15. List all Network File System ( NFS ) files
You can list all the NFS files by using ‘-N’ option. The following lsof command will list all NFS files used by user ‘lakshmanan’.
Use of “lsof” Command to Find Open Files
“lsof” stands for List Open Files. It is a Linux utility for listing down all the open files of a system. This command can be combined with different parameters to modify its output as desired. You can see the details of all of its parameters and flags by seeing the help manual of the “lsof” command.
In today’s article, you will be able to learn the correct usage of the “lsof” command for finding all the open files in Linux Mint 20.
Use of “lsof” Command to Find the Open Files in Linux Mint 20
To learn the correct usage of the “lsof” command and use it to find the open files in Linux Mint 20, you can take a look at all the examples that have been shared below.
Example 1: List All the Open Files in Linux Mint 20
To list down all the open files in Linux Mint 20, you will have to execute the following command in the terminal:
This command will display a list of all the currently opened files on your Linux Mint 20 system, as shown in the image below:
Example 2: List All the Open Files Belonging to a Particular Directory in Linux Mint 20
You can also list down all the open files belonging to a particular directory in Linux Mint 20 by specifying the name of that directory with the “lsof” command in the following manner:
Here, you have to replace the directorypath with the actual path of the directory whose open files you want to list down. For example, we have replaced it with “/var/log/”.
This command will display a list of all the open files that belong to the “/var/log/” directory, as shown in the image below:
Example 3: List All the Open Files Belonging to a Particular User in Linux Mint 20
If you want to list down all the open files belonging to a particular user in Linux Mint 20, then you can do so by executing the “lsof” command in the following manner:
Here, you have to replace the username with the name of the user whose open files you want to list down. For example, we have replaced it with “kbuzdar”.
This command will display a list of all the open files that belong to the specified user, as shown in the image below:
Example 4: List All the Open Files Belonging to a Particular Internet Protocol in Linux Mint 20
You can also try to list down all the open files belonging to a particular Internet protocol in Linux Mint 20 by executing the “lsof” command in the following manner:
You can also replace “6” with “4” if you want to list down all the open files belonging to IPv4.
This command will display a list of all the open files belonging to the IPv6 protocol, as shown in the image below:
Example 5: List All the Open Files Belonging to a Particular File System in Linux Mint 20
If you want to list down all the open files belonging to a particular file system in Linux Mint 20, then you can do so by tweaking the “lsof” command in the following manner:
Here, you can replace “/proc” with any other file system of your choice as well.
This command will display a list of all the open files belonging to the “/proc” file system, as shown in the image below:
Conclusion
By going through all the examples that have been shown to you in this article, you will be able to learn the correct usage of the “lsof” command for finding all the open files in Linux Mint 20.
About the author
Karim Buzdar
Karim Buzdar holds a degree in telecommunication engineering and holds several sysadmin certifications. As an IT engineer and technical author, he writes for various web sites. He blogs at LinuxWays.