Ftp серверы для линукс

How to setup and configure an FTP server in Linux?

FTP (file transfer protocol) is an internet protocol that is used for transferring files between client and server over the internet or a computer network. It is similar to other internet protocols like SMTP which is used for emails and HTTP which is used for websites. FTP server enables the functionality of transferring files between server and client. A client connects to the server with credentials and depending upon the permissions it has, it can either read files or upload files to the server as well. In this article, we will see how to set up an FTP server, configure user permissions, configure a firewall and finally encrypt our FTP traffic with SSL.

How does the FTP server work?

FTP server facilitates the transfer of files between client and server. You can either upload a file to a server or download a file from the server. A client makes two types of connections with the server, one for giving commands and one for transferring data. The client issues the command to the FTP server on port 21, which is the command port for FTP. For transferring data, a data port is used. There are two types of connection modes for transferring data:

• Active mode: In Active mode, the client opens a port and waits for the server to connect to it to transfer data. The server uses its port 20 to connect to the client for data transfer. Active mode is not set by default in most of the FTP clients because most firewalls block the connections which are initiated from outside, in this case, the connection initiated by our FTP server. To use this, you have to configure your firewall.
• Passive mode: In this, when a client requests a file from the server, the server opens a random port and tells the client to connect to that port. In this case, the connections are initiated by the client and this also solves the firewall issues. Most of the FTP clients use passive mode by default.

Stepwise Implementation

At first SSH into your Linux virtual machine with a user who has sudo permissions and follows the following steps:

Step 1: Install FTP server

There are many FTP servers to choose from like ProFTPD, vsftpd, etc. We will be using vsftpd.

Features of vsftpd FTP server

vsftpd has a lot of features that make it a great option as an FTP server. It

• Supports SSL/TLS integration
• Can jail users into its home directory with a feature called chroot. We will set this up later in this article.
• Can limit bandwidth.
• Supports virtual users
• Supports virtual IP configuration
• Supports IPv6

Type in the following command to install vsftpd

Now we will check if the vsftpd service is active or not. Type in

sudo systemctl status vsftpd

You can see under the Active heading that it’s active and running. systemctl command is used to manage and check services on Linux. We can also use this command to enable and disable services on Linux. If your vsftpd is not active, then type in

sudo systemctl enable --now vsftpd

The –now flag ensures that enable command affects our service immediately and not after a reboot.

Step 2: Configure Firewall

FTP uses port 20 for active mode, port 21 for commands, and a range of ports for passive mode. We need to open these ports from our firewall. If you do not use any firewall, you can skip this step. Most Linux systems use ufw to manage firewalls, however, some cloud service providers like Microsoft Azure have firewalls outside of the Virtual machine and you have to configure that from their portal. Whatever the case, just open ports 20 and 21 for TCP connections and open a range of ports for passive FTP connections. The range for passive ports depends upon how many concurrent user clients you expect to have. Also, a single client can use multiple ports to transfer multiple files or a large file. We also need to specify our FTP server to use those ports and we will see how to do it later in this tutorial The ports till 1024 are reserved and our passive FTP port range should be higher than that. I’ll open ports from 5000-10000. We will also open port 990 for TLS which we will configure later. Let’s do it for ufw. Type in

sudo ufw allow 20/tcp sudo ufw allow 21/tcp sudo ufw allow 990/tcp sudo ufw allow 5000:10000/tcp

Step 3: Configure Users

The two most common use cases of FTP servers are:

• You want to host a public FTP server and a lot of public users are going to connect to your FTP server to download files.
• You want to upload your files to your Linux server for personal use and you would not have public users.

In the first case, you would need to create an additional user and share its username and password with your clients to access the files. Everything else is the same for the second case.

The basic idea is that the admin user should be able to upload files to any folder of the machine, and the public user should be able to view and download files from a specific directory only. To make this happen, you should have a basic idea of user permissions. The root user has the permission to write files into any folder of the server, and any other user has access to every folder inside their home directory which is /home/username , and most of the other directories are not writable by other users. So if you want to upload files to other directories outside of your admin user’s home directory, let’s say /var/www, then you would need to change the owner of this directory to your admin user with chown command, or change directory modification permissions with chmod command.

Let’s start by creating our public user account. Type in

Enter your password, leave other values empty, and at last, enter Y to save changes.

Now, for security purposes, we will disable ssh permission for this user. Type in

sudo nano /etc/ssh/sshd_config

Add the following line in this file

Press Ctrl + x then y then enter. Now, restart the SSH service so that these new settings take effect.

sudo systemctl restart sshd

Step 4: Create the FTP folder and set permissions

We will create our FTP folder. Type in

Now, we will change this directory’s owner to our admin user. Type in

If you want to upload files to any folder that is not owned by your admin user, you will have to change that folder’s owner using the above-mentioned command.

Step 5: Configure and secure vsftpd

Open the vsftpd configuration file. Type in

Make sure the following lines are uncommented

. anonymous_enable=NO local_enable=YES write_enable=YES .

Also, we opened ports 5000 to 10000 in step 2 for passive mode, so now we will let vsftpd know which ports to use for passive FTP connection. Add the following lines in vsftpd.conf file

pasv_min_port=5000 pasv_max_port=10000

Now, we will specify the default directory for FTP connections which will open when someone connects to our FTP server. Add the following line

Remember, do not put any space before and after = in this configuration file.

Locking user into the home directory

Now, for security reasons, we will lock the ftpuser to the default directory, as by default, a user can browse the whole Linux server. To do this, vsftpd uses chroot. To do this, un-comment the following lines

. chroot_local_user=YES chroot_list_enable=YES chroot_list_file=/etc/vsftpd.chroot_list .

Also, add the following line as it is not in the configuration file by default

allow_writeable_chroot=YES

The first line enables chroot feature for local users which includes our admin user and our ftpuser. The second and third lines let us choose which users to apply to chroot to.

Setting file permission

This line will set the modification permission of every new file created to 664(-rw-rw-r-) and of every new folder to 775(rwxrwxr-x). With this, the ftpuser can only read and download files from every sub-directory of our FTP directory, but it does not have permission to upload anything to our FTP directory since it is not the owner.

Press Ctrl + x then y then enter. Now, we need to create that list file. Type in

sudo touch /etc/vsftpd.chroot_list sudo nano /etc/vsftpd.chroot_list

Whatever users you specify in this file, will not be chroot-ed. So add your admin username in this file because we do not want to lock it. Press Ctrl + x then y then enter. Now we need to restart our vsftpd server so that all these settings get applied immediately. Type in

sudo systemctl restart --now vsftpd

Step 6: Securing vsftpd with SSL/TLS

It is recommended to encrypt FTP traffic if you want to use it over the internet. We will encrypt our traffic with FTPS (file transfer protocol over SSL). Let’s start by generating a self-signed certificate. Type in

sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout /etc/ssl/private/vsftpd.pem -out /etc/ssl/private/vsftpd.pem

Enter all the required information and your certificate will be generated. You can also Hit Enter if you want the default values to be set. Now, open the vsftpd configuration file. Type

Go to the end of the file and remove the following lines

And, paste the following lines

rsa_cert_file=/etc/ssl/private/vsftpd.pem rsa_private_key_file=/etc/ssl/private/vsftpd.pem ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=YES force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=NO ssl_sslv3=NO require_ssl_reuse=NO ssl_ciphers=HIGH

Save the changes and finally, restart the vsftpd service by typing in

sudo systemctl restart --now vsftpd

Step 7: Connecting to our FTP server

To do this, you will need an FTP client. Again, there are a bunch of them to choose from. I’d suggest you go with Filezilla. Download and install it and then open it. Enter your server’s IP address in the Host field, your username, and password, and click connect and you are good to go.

On the left side, you would see your PC’s directories, and on the right, you would see the directories of your FTP server. You can drag and drop files to upload and download files between the FTP server and your device(client).

FTP server commands

You can also connect to your FTP server on the terminal and operate it with FTP commands. A list of a few of them is given below.

Command	Function
pwd	print the current working directory
cwd	change working directory
dele	delete the specified file
cdup	change to the parent directory
help	displays help information
cd	change the working directory
get filename	download the specified file
put filename	uploads the specified file
bye	end FTP session

Источник