Get all listening ports linux

How can I see what ports are open on my machine?

I would like to see what ports are open on my machine, e.g. what ports my machine is listening on. E.g. port 80 if I have installed a web server, and so on. Is there any command for this?

10 Answers 10

If the netstat command is not available, install it with:

sudo apt install net-tools 

-l already filters for listening. grep LISTEN won’t help beyond hiding 2 lines of header information.

-t : tcp, -l : listening socket, -p : show pid and program name, -n : print 127.0.0.1:80 instead of localhost:http . Reference: linux.die.net/man/8/netstat

The expanded command is sudo netstat —tcp —listening —programs —numeric . There’s no need to use grep unless you want to eliminate column headers.

nmap (install)

Nmap («Network Mapper») is a free and open source utility for network exploration or security auditing.

Use nmap 192.168.1.33 for internal PC or nmap external IP address .

More information man nmap .

Zenmap is the official GUI frontend.

Remember that there is a difference between nmap localhost and nmap 192.168.0.3 (or what ever you machine IP is)

I think netstat is a better answer to this. netstat will list what the system is listening on directly, and without using an additional application or doing unnecessary calls over localhost or thought the network.

This is stupid. If you have access to the computer, just use netstat -ln . You’ll instantly see all the open ports.

nmap localhost didn’t find services that were bound only to localhost. For example, I run influxd with bind-address:localhost:8086 . That didn’t show up in sudo nmap localhost , but did show up in sudo netstat -tulpn .

Other good ways to find out what ports are listenting and what your firewall rules are:

To list open ports use the netstat command.

 $ sudo netstat -tulpn | grep LISTEN tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 5452/dnsmasq tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 1037/cupsd tcp6 0 0 ::1:631 . * LISTEN 1037/cupsd 

In the above example three services are bound to the loopback address.

IPv4 services bound to the loopback address «127.0.0.1» are only available on the local machine. The equivalent loopback address for IPv6 is «::1». The IPv4 address «0.0.0.0» means «any IP address», which would mean that other machines could potentially connect to any of the locally configured network interfaces on the specific port.

Another method is to use the lsof command:

 $ sudo lsof -nP -i | grep LISTEN cupsd 1037 root 9u IPv6 11276 0t0 TCP [::1]:631 (LISTEN) cupsd 1037 root 10u IPv4 11277 0t0 TCP 127.0.0.1:631 (LISTEN) dnsmasq 5452 nobody 5u IPv4 212707 0t0 TCP 127.0.0.1:53 (LISTEN) 

For more details see man netstat or man lsof .

Источник

Check for Listening Ports in Linux

When troubleshooting network connectivity or application-specific issues, one of the first things to check should be what ports are actually in use on your system and which application is listening on a specific port.

This article explains how to use the netstat , ss and lsof commands to find out which services are listening on which ports. The instructions are applicable for all Linux and Unix-based operating systems like macOS.

What is Listening Port

Network port is identified by its number, the associated IP address, and type of the communication protocol, such as TCP or UDP.

Listening port is a network port on which an application or process listens on, acting as a communication endpoint.

Each listening port can be open or closed (filtered) using a firewall. In general terms, an open port is a network port that accepts incoming packets from remote locations.

You can’t have two services listening to the same port on the same IP address.

For example, if you are running an Apache web server that listens on ports 80 and 443 and you try to install Nginx , the later will fail to start because the HTTP and HTTPS ports are already in use.

Check Listening Ports with netstat

netstat is a command-line tool that can provide information about network connections.

To list all TCP or UDP ports that are being listened on, including the services using the ports and the socket status use the following command:

The options used in this command have the following meaning:

• -t — Show TCP ports.
• -u — Show UDP ports.
• -n — Show numerical addresses instead of resolving hosts.
• -l — Show only listening ports.
• -p — Show the PID and name of the listener’s process. This information is shown only if you run the command as root or sudo user.

The output will look something like this:

Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 445/sshd tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 929/master tcp6 0 0 . 3306 . * LISTEN 534/mysqld tcp6 0 0 . 80 . * LISTEN 515/apache2 tcp6 0 0 . 22 . * LISTEN 445/sshd tcp6 0 0 . 25 . * LISTEN 929/master tcp6 0 0 . 33060 . * LISTEN 534/mysqld udp 0 0 0.0.0.0:68 0.0.0.0:* 966/dhclient 

The important columns in our case are:

• Proto — The protocol used by the socket.
• Local Address — The IP Address and port number on which the process listen to.
• PID/Program name — The PID and the name of the process.

If you want to filter the results, use the grep command . For example, to find what process listens on TCP port 22 you would type:

sudo netstat -tnlp | grep :22 

The output shows that on this machine port 22 is used by the SSH server:

tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 445/sshd tcp6 0 0 . 22 . * LISTEN 445/sshd 

If the output is empty it means that nothing is listening on the port.

You can also filter the list based on criteria, for example, PID, protocol, state, and so on.

netstat is obsolete and replaced with ss and ip , but still it is of the most used commands to check network connections.

Check Listening Ports with ss

ss is the new netstat . It lacks some of the netstat features, but exposes more TCP states and it is slightly faster. The command options are mostly the same, so the transition from netstat to ss is not difficult.

To get a list of all listening ports with ss you would type:

The output is almost the same as the one reported by netstat :

State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 128 0.0.0.0:22 0.0.0.0:* users:(("sshd",pid=445,fd=3)) LISTEN 0 100 0.0.0.0:25 0.0.0.0:* users:(("master",pid=929,fd=13)) LISTEN 0 128 *:3306 *:* users:(("mysqld",pid=534,fd=30)) LISTEN 0 128 *:80 *:* users:(("apache2",pid=765,fd=4),("apache2",pid=764,fd=4),("apache2",pid=515,fd=4)) LISTEN 0 128 [::]:22 [::]:* users:(("sshd",pid=445,fd=4)) LISTEN 0 100 [::]:25 [::]:* users:(("master",pid=929,fd=14)) LISTEN 0 70 *:33060 *:* users:(("mysqld",pid=534,fd=33)) 

Check Listening Ports with lsof

lsof is a powerful command-line utility that provides information about files opened by processes.

In Linux, everything is a file. You can think of a socket as a file that writes to the network.

To get a list of all listening TCP ports with lsof type:

sudo lsof -nP -iTCP -sTCP:LISTEN 

The options used are as follows:

• -n — Do not convert port numbers to port names.
• -p — Do not resolve hostnames, show numerical addresses.
• -iTCP -sTCP:LISTEN — Show only network files with TCP state LISTEN.

COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME sshd 445 root 3u IPv4 16434 0t0 TCP *:22 (LISTEN) sshd 445 root 4u IPv6 16445 0t0 TCP *:22 (LISTEN) apache2 515 root 4u IPv6 16590 0t0 TCP *:80 (LISTEN) mysqld 534 mysql 30u IPv6 17636 0t0 TCP *:3306 (LISTEN) mysqld 534 mysql 33u IPv6 19973 0t0 TCP *:33060 (LISTEN) apache2 764 www-data 4u IPv6 16590 0t0 TCP *:80 (LISTEN) apache2 765 www-data 4u IPv6 16590 0t0 TCP *:80 (LISTEN) master 929 root 13u IPv4 19637 0t0 TCP *:25 (LISTEN) master 929 root 14u IPv6 19638 0t0 TCP *:25 (LISTEN) 

Most of the output columns names are self-explanatory:

• COMMAND , PID , USER — The name, the pid and the user running the program associated with the port.
• NAME — The port number.

To find what process is listening on a particular port, for example, port 3306 you would use:

sudo lsof -nP -iTCP:3306 -sTCP:LISTEN 

The output shows that MySQL server uses port 3306 :

COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME mysqld 534 mysql 30u IPv6 17636 0t0 TCP *:3306 (LISTEN) 

For more information, visit the lsof man page and read about all other powerful options of this tool.

Conclusion

We have shown you several commands that you can use to check what ports are in use on your system, and how to find what process listens on a specific port.

If you have any questions or remarks, please leave a comment below.

Источник

4 Ways to Find Out What Ports Are Listening in Linux

The state of a port is either open, filtered, closed, or unfiltered. A port is said to be open if an application on the target machine is listening for connections/packets on that port.

In this article, we will explain four ways to check open ports and also will show you how to find which application is listening on what port in Linux.

1. Using Netstat Command

Netstat is a widely used tool for querying information about the Linux networking subsystem. You can use it to print all open ports like this:

The flag -l tells netstat to print all listening sockets, -t shows all TCP connections, -u displays all UDP connections and -p enables printing of application/program name listening on the port.

To print numeric values rather than service names, add the -n flag.

You can also use grep command to find out which application is listening on a particular port, for example.

$ sudo netstat -lntup | grep "nginx"

Alternatively, you can specify the port and find the application bound to, as shown.

$ sudo netstat -lntup | grep ":80"

2. Using ss Command

ss command is another useful tool for displaying information about sockets. It’s output looks similar to that of netstat. The following command will show all listening ports for TCP and UDP connections in numeric value.

3. Using Nmap Command

Nmap is a powerful and popular network exploration tool and port scanner. To install nmap on your system, use your default package manager as shown.

$ sudo apt install nmap [On Debian/Ubuntu] $ sudo yum install nmap [On CentOS/RHEL] $ sudo dnf install nmap [On Fedora 22+]

To scan all open/listening ports in your Linux system, run the following command (which should take a long time to complete).

$ sudo nmap -n -PN -sT -sU -p- localhost

4. Using lsof Command

The final tool we will cover for querying open ports is lsof command, which is used to list open files in Linux. Since everything is a file in Unix/Linux, an open file may be a stream or a network file.

To list all Internet and network files, use the -i option. Note that this command shows a mix of service names and numeric ports.

To find which application is listening on a particular port, run lsof in this form.

That’s all! In this article, we have explained four ways to check open ports in Linux. We also showed how to check which processes are bound upon particular ports. You can share your thoughts or ask any questions via the feedback form below.

Источник