Give directory permission linux

Change folder permissions and ownership

I would like the user to have full rights on this folder (as well as all sub-directories and files in it):

currently owned by root. I have found numerous posts (in this forum and elsewhere) on how to do this for files but I can’t find a way to do it for whole folders.

9 Answers 9

Use chown to change ownership and chmod to change rights.

As Paweł Karpiński said, use the -R option to apply the rights for all files inside of a directory too.

Note that both these commands just work for directories too. The -R option makes them also change the permissions for all files and directories inside of the directory.

sudo chown -R username:group directory 

will change ownership (both user and group) of all files and directories inside of directory and directory itself.

sudo chown username:group directory 

will only change the permission of the folder directory but will leave the files and folders inside the directory alone.

As enzotib mentioned, you need to use sudo to change the ownership from root to yourself.

Note that if you use chown : (Note the left-out group), it will use the default group for that user.

If you want to change only the group, you can use:

BEWARE of recursively taking ownership of ANY directory. Think before you leap. Don’t be chown copypastin’ from the internet, kids. Just because you want to install a node package and it won’t let you, don’t sudo chown -R just because the fist hit from googling the error message says to. Reckless sudo chown -R -ing can kill your OS.

It needs to be said that using the -R option only applies to files and folders that exist in the directory already. It does NOT apply to future creations. For example, if you create another folder or file as root within the folder you’ve already changed permissions on, you will have the same experiences you’re having now until you chmod\chown them again.

Make the current user own everything inside the folder (and the folder itself):

very helpful for newbies (like me) when don’t know what to type in ‘usergroup’ for sudo chown : -R /.blabla

If you prefer, this can be done with a GUI as well. You will need to open Nautilus as root to do so. Press Alt + F2 to access the «Run Applications» dialog and enter gksu nautilus

Next, browse to and right click on the folder you would like to modify. Then, select «Properties» from the context menu. You can now select the user or group that you would like to be the «Owner» of the folder as well as the permissions you would like to grant them. Finally, press «Apply Permissions to Enclosed Files» to apply the changes recursively.

Though it seems this does not always work for some operations in a deep folder tree. If it does not work use the appropriate terminal command.

Источник

How I Give a User Permission to a Folder in Linux

Privacy is an essential part of someone’s life, whether social media or the workplace. It helps protect the personal and professional data that we don’t want to share with everybody. Sometimes, people work on sensitive data that couldn’t be shared inside or outside the firm.

Similarly, when multiple users are connected with the system, they may need some private access to the specific resources. If we talk about files or folders/directories permission, it means you allow them to read, write, or modify the files or directories. It is essential to revert the ownership of files/folders from the users who are not part of your current account but can own them.

It is assumed as challenging for a Linux user to access permission to a file or folder because they are a bit aware of it. Setting the permission to the specific folder is quite simple and can be done via command-line or GUI (we will later discuss how we can do it).

There are two levels in the Linux system for authorization that you must need to understand:

Let’s explain both of them to understand what categories they are further divided into:

Ownership:

If we talk about ownership of files or folders in the Linux operating system, they are split into 3 types:

The user-created the folder, and that’s why sometimes we claimed it as an owner. It is represented as “u” in the command line when giving access through commands.

A group contains several Linux users connected to a system having the same permission access. It is helpful when many users use the system and give them folder permission to access it. You can make a group to add all of them instead of allowing them individually. In this case, people other than the group couldn’t be able to access the folder. The representative form of group members in the Linux command-line is “g.”

The other category includes public users that are not part of group members or ownership. If you are permitting the others, we can say you are allowing everybody in the world to access the files/folders. Sometimes, it could be dangerous, so think twice before doing it. The public users are represented by “o”:

Permission:

There are 3 types of permission you can give to the owners we have mentioned below:

In the read (r) mode, a user can open a file/folder and read it, whereas the write (w) mode allows making changes in the file/folder. You have the authority to add content, remove or rename it.

Without executing (x) permission, you can only read and write to the file, but you can’t run it. To make the file executable, set the execute permission.

How to give the user permission to a folder in Linux:

You can give permission access to the user using a couple of approaches, via terminal and GUI.

Before directly jumping into it, note the specific commands to change permission and ownership.

• chmod command is used to modify permission
• chown command is used to modify ownership

How to give the user permission to a folder via command-line:

You can set permissions like read, write, or execute the folder through the “chmod” command in a terminal.

You can use the “chmod” command to modify permission settings in two different ways:

The difference between Absolute mode and symbolic mode is that in the Absolute mode, you can set permissions for all the owners (user, group, others) using the three-digit octal number instead of characters. Whereas in the symbolic mode, you can set permission through mathematical symbols and only for the specific owner.

Let’s demonstrate both of them:

Give user access to a folder through absolute mode:

To understand how we can give permission access to a folder through absolute mode, we need to understand the given table in which numbers are mentioned for all the permission types.

Numbers	Permission Types	Symbols for Permission
0	No Permission	—
1	Execute	–x
2	Write	-w-
3	Execute + Write	-wx
4	Read	r–
5	Read + Execute	r-x
6	Read + Write	rw-
7	Read + Write + Execute	Rwx

Let’s run an example to check how it is working:

To display the current permission settings of the folder “Testing_folder,” run the following command:

• First rw– represents🡪 a user (owner) who can read or write/edit the file but couldn’t be able to execute it since execute mode is set to “-.”
• The second rw– represents 🡪 a group (all the users added to the group) that can read or write/edit the file.
• The third r— represents 🡪 others (public) who can only read the file

Now execute the chmod command to change permission access:

(760 🡪 owners can read, write or execute the file, the group can read and write, and there is no access for the public users)

Run the “ls” command to check the modification:

Give user access to a folder through symbolic mode:

Three operators are used in symbolic mode to set permission:

Operator	Function
+	Add permission
–	Remove permission
=	Set the permission and override the previous permission settings

As we have mentioned in the introductory part that how to represents owners. So, let’s start with an example:

Check the current permission setting of “Testing_folder” using the mentioned “ls” command:

To set permission to the user (owner), the command would be:

–

Now, execute the “ls” command to get the output:

To remove read permission from the user, run the command:

Now, execute the “ls” command to get results:

How to give a user permission to a folder via GUI:

Changing the file permission using the GUI is the simplest approach. Follow the listed steps:

Open the home directory, and navigate towards the targeted folder.

For example, to change the permission access to a folder “testing,” firstly, select it:

Right-click on the “testing” folder and select “Properties”:

The “Properties” window will appear with 3 tabs:

Navigate to the “Permissions” tab and select it:

From this tab, you can make changes according to the requirement.

Click on the “Change Permission for Enclosed Files,” and you will get a window that allows the user to modify the permission mode, i-e read and write mode for the owners:

Suppose the current permissions status of the “testing” folder is given below:

Let’s open the “change permissions” window and modify the entries as:

Navigate to the “change” button and click it.

Now, confirm using the “ls” command again in the terminal if changes have been made successfully.

Conclusion:

Set permission access to the files or folders is compulsory nowadays for security reasons because someone who is no longer a part of your system may also have folder access. To get control the security issues and keep the files safe, you can set permissions.

There are three categories of ownership i-e user, group, and others. And also, we have 3 types for permission settings such as read, write and execute.

You can give a user permission to the folder in two ways; via command-line and GUI. The GUI approach is better, in my opinion, as it is a pretty straightforward and simple way to set permissions.

About the author

Syeda Wardah Batool

I am a Software Engineer Graduate and Self Motivated Linux writer. I also love to read latest Linux books. Moreover, in my free time, i love to read books on Personal development.

Источник