Home assistant интеграция роутера asus

# Getting started

There are two supported ways to install AsusRouter to your HA instance — Home Assistant Community Store (HACS) and manual installation from the stable branch of the integration GitHub.

Keep in mind, manual installation of development ( main ) branch is not and will not be supported!

# HACS

You can add this repository to your HACS going the following path:

HACS -> Integrations -> Explore & Download Repositories -> AsusRouter

# Manual

open in new window custom_components/asusrouter/ to custom_components/asusrouter/ in your Home Assistant folder.

# Initial setup

After AsusRouter is installed, you can add your device from Home Assistant UI.

# Device discovery

You need to specify the device IP address (e.g. 192.168.1.1 ) or hostname (e.g. my.router.com ) as the first step of integration setup. AsusRouter will automatically check whether you device can be reached.

# Troubleshooting

Error	Log level	Description
Hostname cannot be resolved	ERROR	The hostname cannot be resolved. Use the device IP address

# Setup

To connect to the device you need to provide the following minimum data:

• Username (for logging into the Web UI)
• Password
• Port (the default value 0 will select either 80 for non-SSL or 8443 for SSL connection)
• SSL connection ( true is recommended)

# Troubleshooting

Error	Log level	Description
Connection refused	ERROR	The device is refusing connection. Check the logs
Wrong credentials	ERROR	Check username and password
Login is blocked	ERROR	Too many attempts with wrong credentials were made. The timeout value is provided in HA log
Error / Unknown	ERROR	Refer to the HA log for details

# Configuration

When the setup is successful, you will be provided with advanced options.

AsusRouter integration, library and webpage are maintained by @Vaskivskyi

Источник

ASUSWRT

The ASUSWRT integration can connect Home Assistant to a ASUS router that runs on ASUSWRT firmware.

There is currently support for the following device types within Home Assistant:

• Presence Detection — The ASUSWRT platform offers presence detection by looking at connected devices to a ASUSWRT based router.
• Sensor — The ASUSWRT sensors platform allows you to get information from your ASUS router within Home Assistant.

Configuration

Adding ASUSWRT to your Home Assistant instance can be done via the user interface, by using this My button:

If the above My button doesn’t work, you can also perform the following steps manually:

• Browse to your Home Assistant instance.
• Go to Settings > Devices & Services.
• In the bottom right corner, select the Add Integration button.
• From the list, select ASUSWRT.
• Follow the instructions on screen to complete the setup.

You need to enable telnet on your router if you choose to use protocol: telnet .

Sensors Configuration

These sensors are automatically created and associated to the router device:

• Connected devices sensor
• Download sensor (unit_of_measurement: Gigabyte — Daily accumulation)
• Download Speed sensor (unit_of_measurement: Mbit/s)
• Upload sensor (unit_of_measurement: Gigabyte — Daily accumulation)
• Upload Speed sensor (unit_of_measurement: Mbit/s)
• Load average sensors (1min, 5min, 15min)
• Temperature sensors (2ghz, 5ghz, cpu). NB: only temperature sensors available on your router will be created

Only Connected devices sensor is created in status enabled, all other sensors are created in status disabled. To use them, simply enable on the devices page.

Options

Options for ASUSWRT can be set via the user interface, by taking the following steps:

• Browse to your Home Assistant instance.
• Go to Settings > Devices & Services.
• If multiple instances of ASUSWRT are configured, choose the instance you want to configure.
• Select the integration, then select Configure.

Number of seconds that must elapse before considering a disconnected device not at home .

Enable this option to track also devices that do not have a name. Name will be replaced by mac address.

The interface that you want statistics from (e.g. eth0,eth1 etc).

The location in the router of the dnsmasq.leases file.

If devices must have IP (this option is available only for access point mode).

If you don’t want to automatically track new detected device, disable the integration system option Enable new added entities

Padavan custom firmware (The rt-n56u project)

The rt-n56u project does not store dnsmasq.leases which is used to track devices at /var/lib/misc/ as asuswrt do. However this integration can still be used for the rt-n56u project by changing the dnsmasq location using the dnsmasq variable to dnsmasq: ‘/tmp’ Also, to get the statistics for the WAN port, specify interface: ‘eth3’ as this is the interface used in the rt-n56u project

Help us to improve our documentation

The ASUSWRT hub was introduced in Home Assistant 0.83, and it’s used by 1.2% of the active installations. Its IoT class is Local Polling.

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

Monitor and control your AsusWRT-powered router from Home Assistant

License

Vaskivskyi/ha-asusrouter

This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Sign In Required

Please sign in to use Codespaces.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

Monitor and control your AsusWRT-powered router from Home Assistant

AsusRouter is a custom integration for Home Assistant to monitor and control your AsusWRT (and AsusWRT-Merlin)-powered router using the AsusRouter python library.

The integration uses the native HTTP(S) API (the same way as WebUI) and relies on direct communication with your device.

You can find the full documentation on the official webpage.

📢 Do you want to add AsusRouter to the default HA Core integrations?

👍 Vote for the feature request!

Firmware versions 3.0.0.4.x are fully supported (older versions might have a limited amount of sensors available). When talking about the FW, 3.0.0.4 might be missed since it is the same all the time. Important is only the last part, e.g. 386.48631 for the stock or 386.7 for Merlin FW.

Firmware 5.x.x (some DSL models) is NOT supported (not AsusWRT).

You can add this repository to your HACS: HACS -> Integrations -> Explore & Download Repositories -> AsusRouter

Copy content of the stable branch custom_components/asusrouter/ to custom_components/asusrouter/ in your Home Assistant folder.

After AsusRouter is installed, you can add your device from Home Assistant UI.

To connect to the device you need to provide the following data:

• IP address or hostname
• Username (the one you use to log into the WebUI)
• Password
• Whether to use an SSL connection

Almost all the integration settings can be reconfigured later via the Configure button on the Integrations page without the need to remove your device and add it again.

AsusRouter supports 14+ groups of features, including monitoring of:

• connected device, CPU, guest WLAN, LED, load average, network, OpenVPN, parental control, ports, RAM, temperature, WAN, WLAN.

as well as the following HA platrorms:

and HA events and services.

AsusRouter supports virtually every AsusWRT-powered device.

Here is the list of features being in process of development or considered for the future development. If you cannot find the feature you would like to have in the integration, please, open a new feature request.

1. Full support (#82)

1. Per-device traffic monitoring (#220)
2. Possibility to use DHCP `hostname` value for device tracking (#119)

If you have found an issue working with the integration or just want to ask for a new feature, please fill in a new issue.

You are also welcome to submit pull requests to the repository!

This integration is a free-time project. If you like it, you can support me by buying a coffee.

The initial codebase for this integration is highly based on Home Assistant core integration AsusWRT and ollo69/ha_asuswrt_custom.

Footnotes

About

Monitor and control your AsusWRT-powered router from Home Assistant

Источник