How to connect wifi internet

How to Connect a Router to the Internet

Jonathan Fisher is a CompTIA certified technologist with more than 6 years’ experience writing for publications like TechNorms and Help Desk Geek.

In This Article

What to Know

• Connect your modem to your router’s WAN port via Ethernet cable. Plug the power supply in for both devices and wait for the lights to come on.
• Find your router’s network name (SSID) and network key. Use this information to connect your device to Wi-Fi.
• To change the settings, open a web browser and enter the router’s IP address in the URL bar, then enter the user name and password.

This article explains how to connect a router to the internet. The instructions apply broadly to all routers and modem-router combos.

How Do You Connect a Wireless Router to the Internet?

Once you have a plan with an Internet Service Provider (ISP), follow these steps to set up your wireless network and connect to the internet:

1. Connect your modem to the wall outlet via a coaxial cable (the cylindrical cable that screws into the wall used for cable TV) or fiber optical cable if you have fiber internet.

If you have a modem-router combo unit, that’s all you need to do. Skip ahead to the next section to set up your Wi-Fi network.

Insert an Ethernet cable (one should come with the router) into the WAN/uplink port on your router. The WAN port might be a different color than the other Ethernet ports.

If your computer has an Ethernet port, you can connect it directly to one of the open ports on a modem/router combo for a more stable internet connection.

How Do I Activate Internet on a New Router?

Go to the Wi-Fi settings and connect to the wireless network on your device. Enter the network key to start using the internet. You can find your network name (SSID) and key in the manual or on the router itself.

The network name and key are not the same as the user name and password, which are used to configure your router’s settings.

Why Is My Router Not Connecting to the Internet?

If you can’t connect to your Wi-Fi network at all, you may be too far away from the router. The best place to put your router is in a central location with as few nearby obstructions as possible. If you need to increase the wireless signal range, consider buying a Wi-Fi extender.

Try rebooting your router and modem if you’re still having issues. If you’re connected to your Wi-Fi network but don’t have internet access, you need to troubleshoot your internet connection.

How to Access Your Router Settings

Log in to your router to configure your Wi-Fi network settings. Find your router’s IP address and enter it in the URL bar of a web browser, then enter the user name and password. You can usually find this information on the back or bottom of your device.

You can create a guest network from your router’s admin interface, configure advanced security settings, and change the default Wi-Fi password.

If the user name and password (or the network name and network key) have been changed, reset the router to factory settings to restore the default log-in credentials.

Connecting your DVR to the internet may be an option that lets you access a wider variety of features. If your DVR has an Ethernet port, you can connect directly to your modem using an Ethernet cable.

To connect to a wireless network on a Windows 10 laptop, select the Network icon in the taskbar, choose a network, select Connect, and enter the network key if prompted. To connect to a Wi-Fi network on macOS, select the network icon in the menu bar, choose the network, enter the password if prompted, and select OK.

Источник

Setting up a wireless network in Windows

A wireless network at home lets you get online from more places in your house. This article describes the basic steps for setting up a wireless network and starting to use it.

Get the right equipment

Before you can set up your wireless network, here’s what you’ll need:

Broadband Internet connection and modem. A broadband Internet connection is a high-speed Internet connection. Digital Subscriber Line (DSL) and cable are two of the most common broadband connections. You can get a broadband connection by contacting an Internet service provider (ISP). Typically, ISPs that provide DSL are telephone companies and ISPs that provide cable are cable TV companies. ISPs frequently offer broadband modems. Some ISPs also offer combination modem/wireless routers. You can also find these at computer or electronics stores, and online.

Wireless router. A router sends info between your network and the Internet. With a wireless router, you can connect PCs to your network using radio signals instead of wires. There are several different kinds of wireless network technologies, which include 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, and 802.11ax.

Wireless network adapter. A wireless network adapter is a device that connects your PC to a wireless network. To connect your portable or desktop PC to your wireless network, the PC must have a wireless network adapter. Most laptops and tablets—and some desktop PCs—come with a wireless network adapter already installed.

To check whether your PC has a wireless network adapter:

1. Select Start , type device manager in the search box, and then select Device Manager.
2. Expand Network adapters.
3. Look for a network adapter that might have wireless in the name.

Setting up the modem and Internet connection

After you have all the equipment, you’ll need to set up your modem and Internet connection. If your modem wasn’t set up for you by your Internet service provider (ISP), follow the instructions that came with your modem to connect it to your PC and the Internet. If you’re using Digital Subscriber Line (DSL), connect your modem to a phone jack. If you’re using cable, connect your modem to a cable jack.

Positioning the wireless router

Put your wireless router somewhere where it will receive the strongest signal with the least amount of interference. For better results, follow these tips:

Place your wireless router in a central location. Place the router as close to the center of your home as possible to increase the strength of the wireless signal throughout your home.

Position the wireless router off the floor and away from walls and metal objects, such as metal file cabinets. The fewer physical obstructions between your PC and the router’s signal, the more likely that you’ll be using the router’s full signal strength.

Reduce interference. Some networking equipment uses a 2.4 gigahertz (GHz) radio frequency. This is the same frequency as most microwaves and many cordless phones. If you turn on the microwave or get a call on a cordless phone, your wireless signal might be temporarily interrupted. You can avoid most of these issues by using a cordless phone with a higher frequency, such as 5.8 GHz.

Securing your wireless network

Security is always important; with a wireless network, it’s even more important because your network’s signal could be broadcast outside your home. If you don’t help secure your network, people with PCs nearby could access info stored on your network PCs and use your Internet connection.

To help make your network more secure:

Change the default user name and password. This helps protect your router. Most router manufacturers have a default user name and password on the router and a default network name (also known as the SSID). Someone could use this info to access your router without you knowing it. To help avoid that, change the default user name and password for your router. See the documentation for your device for instructions.

Set up a security key (password) for your network. Wireless networks have a network security key to help protect them from unauthorized access. We recommend using Wi-Fi Protected Access 3 (WPA3) security if your router and PC support it. See the documentation for your router for more detailed info, including what type of security is supported and how to set it up.

Some routers support Wi-Fi Protected Setup (WPS). If your router supports WPS and it’s connected to the network, follow these steps to set up a network security key:

1. Do one of the following, depending on which version of Windows is running on your PC:
   • In Windows 7 or Windows 8.1, select Start, start typing Network and Sharing Center, and then choose it in the list.
   • In Windows 10, select Start , then select Settings >Network & Internet >Status >Network and Sharing Center.
   • In Windows 11, select Start, type control panel, then select Control Panel >Network and Internet >Network and Sharing Center.
2. Select Set up a new connection or network.
3. Select Set up a new network, then choose Next.

The wizard will walk you through creating a network name and a security key. If your router supports it, the wizard will default to Wi‑Fi Protected Access (WPA2 or WPA3) security. We recommend that you use WPA3 if you can, because it offers better security than WPA2, WPA, or Wired Equivalent Privacy (WEP) security. With WPA3, WPA2 or WPA you can also use a passphrase, so you don’t have to remember a cryptic sequence of letters and numbers.

Write down your security key and keep it in a safe place. You can also save your security key on a USB flash drive by following the instructions in the wizard. (Saving your security key to a USB flash drive is available in Windows 8 and Windows 7, but not in Windows 10 or Windows 11.)

Use a firewall. A firewall is hardware or software that can help protect your PC from unauthorized users or malicious software (malware). Running a firewall on each PC on your network can help control the spread of malicious software on your network, and help protect your PCs when you’re accessing the Internet. Windows Firewall is included with this version of Windows.

Connect a PC to your wireless network

1. Select the Network or Wifi icon in the notification area.
2. In the list of networks, choose the network that you want to connect to, and then select Connect.
3. Type the security key (often called the password).
4. Follow additional instructions if there are any.

If you have problems with your Wi-Fi network when using Windows 10, see Fix Wi-Fi problems in Windows for advanced troubleshooting info.

1. Select the Network icon in the notification area, then select the > icon next to the Wi-Fi quick setting to see a list of available networks.
2. Choose the network that you want to connect to, and then select Connect.
3. Type the security key (often called the password).
4. Follow additional instructions if there are any.

If you have problems with your Wi-Fi network when using Windows 11, see Fix Wi-Fi problems in Windows for advanced troubleshooting info.

Источник

Connect to a Wi-Fi network in Windows

Whether you’re at home, work, or out and about, chances are you’ll find a Wi-Fi network that you can connect to for internet access.

Select the Network, Sound, or Battery icons ( ) on the far right side of the taskbar to open quick settings.

The Disconnected icon appears when you’re not connected.

On the Wi-Fi quick setting, select Manage Wi-Fi connections .

Choose the Wi-Fi network you want, then select Connect.

Type the network password, and then select Next.

Whether you’re at home, work, or out and about, chances are you’ll find a Wi-Fi network that you can connect to for internet access.

1. Select the Network icon on the taskbar. The icon that appears depends on your current connection state. If you don’t see one of the network icons (or a similar one) shown in the following image, select the Up arrow to see if it appears there.
2. Choose the Wi-Fi network you want, then select Connect.
3. Type the network password, and then select Next.
4. Choose Yes or No, depending on the type of network you’re connecting to and if you want your PC to be discoverable by other PCs and devices on the network.

Источник