How to connect wifi to wifi routers

How to Extend WiFi Range with Another Router?

You already know all the best spots to get a strong WiFi signal if you have a spacious home. However, while you may prefer your room to attend zoom meetings or watch Netflix, your space may fall out of the router’s range.

Fortunately, there are a few ways to remedy this problem and ensure you get strong signals in all corners of your home. You can change your router location, update your WiFi router, or use a wireless repeater to extend your WiFi connection.

In this article, we are going to help you extend your WiFi range using another router. You can either bring out an old, retired router from the storage or purchase a new one to boost the wireless connection range in the whole house.

How can I Extend my WiFi with another Router?

Even if you have installed a robust WiFi connection in your home, a single router may not provide enough wireless coverage to all the rooms. As a result, you can either have weak signals or a WiFi dead zone in your room.

In such circumstances, you can use another router to boost the range of your wireless signal. You can connect the second router to the original one as a new access point or use it as a wireless extender.

A New Access Point

One way to extend your wireless connection is to use another router as a new wireless access point in your home. This technique is beneficial for people who are already using installed Ethernet cables in their homes.

However, if you do not have extra wiring, you can string different cables to connect the new access point in WiFi dead zones.

Here are the steps to connect the second WiFi router successfully.

Primary Router’s IP Address

Before connecting the new router to the old one, you need to pull up some information on your primary router. But first, you need the router’s IP address to open its setting page.

• Find a Windows PC or laptop and connect it to your existing router.
• Go to the command prompt by typing cmd in the search bar.
• Next, type ipconfig on the available screen and press enter.
• Here, go to Default Gateway and copy this IP address of your primary router, which is a mix of just numbers and periods.

Check Primary Router’s Configuration Screen

After your IP address, go to the internet browser and paste this address on the URL address bar. Next, your browser will pull up the configuration firmware screen for your router, where you have to log in with the ID and password.

If you know the login details, type them in the given boxes. However, if you do not see the ID and password, flip your router to see the label underneath the box. You can also search the internet for the default ID details of your router.

Once you have logged into the application, you will see a Basic Setup Page on the screen. Go to Wireless Setting and note the WiFi network name or SSID, the channels, and the security type. You will need this information while setting up the second router as the access point.

Besides this, if you find the option of Access Point Mode on the firmware application, make sure to turn it on and save the settings. You might find the option under different names depending on other router models.

Reset the Second Router

To reset your router to the factory settings, you must first connect your second router to a power supply. Next, look at the back of the router to find a small reset button. Then, use a small object like a pen or paperclip to press the button for at least 30 seconds.

As a result, the router will undergo a hard reset, and you will notice that the lights turn off and come back on.

Configuring the Second Router’s Settings

Before you can start configuring the router, make sure to turn off the primary router for a little while. Next, use a network cable to connect it to your laptop or PC, and repeat the first step to pull up the router’s application setup page.

You have to find its IP address on the command prompt, copy the address, and paste it on the URL of your browser. Then, it will take you to the login page of the firmware application.

Once you have logged in, go to the Wireless Setting page on the app, and follow these instructions step-by-step.

• Change the wireless mode to the AP or access point mode.
• You can either select a new SSID (wireless network name) or use the same name as your primary router. In the latter case, make sure to choose a different channel number instead.
• If you have the same SSID for both the router and the AP, keep your AP’s security type and password the same.
• Next, go to the Security subsection and turn off the firewall.

Setting up The Second Router

After you have altered the settings of your second router, you need to ensure that it works along with the primary router. Hence, you need to switch off the NAT function and give your router a fixed IP address.

You can do this by either placing your router on bridging mode or assigning a new one manually.

• Go to the Network Setup or LAN Setup page.
• Here, you need to assign a fixed IP address to your second router that falls out of the range of DHCP.
• Hence, you first need to turn off the DHCP (Dynamic Host Communication Protocol) option to prevent it from automatically assigning a new IP.
• Keep a note of this new IP address for future use.
• Click on save after making changes on each configuration page.

You will have to wait for a little while for the router to reboot after changing the IP. Then, later, you can type in this ID on the browser’s URL to access it.

Connecting Both Routers

The next step involves connecting the two WiFi routers and testing the network. For this purpose, you can either use a pair of networking adapters from the powerline or an extended Ethernet cable network.

Turn on both the routers and keep the second one in a dead zone in your home. Next, connect different smart gadgets to both the WiFi routers to check the signal strength and connectivity.

Using the Second Router as a Wireless Repeater

If you do not have Ethernet cable networks installed in your home, you might find extra cables quite unsightly. What’s more, they only add up the cost of extending your wireless range.

In such cases, some routers have the option to switch to a wireless repeater mode. This system boosts WiFi coverage by rebroadcasting your primary router’s signals without using any cable or power adapters at home.

However, you have to ensure whether your old or new router supports this function or not.

Configuring Wireless Router Settings

Some of the routers from brands like Apple, Netgear, Linksys, and Belkin support a repeater or bridging mode in their settings. You need to keep an eye out for WDS or Wireless Distribution System feature.

These are the basic steps you need to follow to set up your router as a WiFirepeater.

• Go to Wireless Settings and click on the Basic Setting tab on your router’s application on the browser.
• Change the Wireless Mode to Repeater in the settings.
• Keep the Wireless Network Mode and the SSID the same as your primary router.
• After this, click on Add under Virtual Interface and give your repeater a new SSID.
• Save these settings without clicking on Apply.
• Next, go to the Wireless Security tab.
• Here, add the same settings as the primary router under Physical and Virtual Interface.
• Save these settings and move on to the Setup Section.
• Find the router IP box in your settings, and give your WiFi repeater a new fixed IP that differs from the primary router’s IP.
• After configuring your repeater hit on Apply settings. Your router may take some time to restart.
• Then, connect a device to your router and test the strength of your wireless signal.

Custom Firmware

While working with a router with a built-in WDS feature is much easier, you do not have to purchase a new one to extend your wifi signal with a repeater. Instead, you can link it to a third-party software custom firmware to alter its settings.

Some of these applications include DD-WRT, Tomato, and OpenWRT. Although installing these applications does not require any complex instructions, it is tricky to use them.

What’s more, you need first to search if your router model is compatible with custom firmware and whether you can use software like DD-WRT to install a repeater.

Is a Second Router Better than a WiFi Extender?

There is a stark difference between second routers and wireless extenders. On the one hand, the secondary routers use the same network as the primary router and extend signals to a more considerable coverage. On the other hand, WiFi extenders create new networks in whatever location you place them.

As a result, some people find it bothersome to use WiFi extenders to boost the signal to the whole home. While they are handy at providing strong connections in one room, your device does not connect to the leading network if you leave the range of the repeater.

However, there is no doubt that it is much easier and convenient to use wireless repeaters than wired routers.

Conclusion

Living in large homes can become cumbersome when finding the best spots for the wireless network. Your room or office may fall out of the router’s range, and your work slows down from the weak WiFi signal.

However, there is an easy fix to this common problem. You can quickly boost your WiFi signals by using another router to increase the WiFi range. Read the article to learn how you can even repurpose your old router to improve your connection.

Hedayat S

Hedayat is the new Editor-in-Chief of Rottenwifi and has been writing about computer networking since 2012. Hedayat’s strong background in computer science helped him cement his position in the ever-expanding tech blogging world. As a network engineer, systems administrator, and systems analyst during his decade-long career in Information Technology, he has a passion for the internet & technology in his DNA.

Blog.rottenwifi.com is a participant in the Amazon Services LLC Associates Program which means we may get paid commissions on editorially chosen products purchased through our links to retailer sites. All names, logos, brands, and images are trademarks or copyrighted materials of their respective owners. Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.

Источник