How to delete files and folder in linux

How to Remove Files and Directories in Linux Command Line [Beginner’s Tutorial]

Learn how to delete files and remove directories with rm command in Linux.

How to delete a file in Linux? How to delete a directory in Linux? Let’s see how to do both of these tasks with one magical command called rm.

How to delete files in Linux

Let me show you various cases of removing files.

1. Delete a single file

If you want to remove a single file, simply use the rm command with the file name. You may need to add the path if the file is not in your current directory.

If the file is write protected i.e. you don’t have write permission to the file, you’ll be asked to confirm the deletion of the write-protected file.

rm: remove write-protected regular file 'file.txt'?

You can type yes or y and press enter key to confirm the deletion. Read this article to know more about Linux file permissions.

2. Force delete a file

If you want to remove files without any prompts (like the one you saw above), you can use the force removal option -f.

3. Remove multiple files

To remove multiple files at once, you can provide all the filenames.

rm file1.txt file2.txt file3.txt

You can also use wildcard (*) and regex instead of providing all the files individually to the rm command. For example, if you want to remove all the files ending in .hpp in the current directory, you can use rm command in the following way:

4. Remove files interactively

Of course, removing all the matching files at once could be a risky business. This is why rm command has the interactive mode. You can use the interactive mode with the option -i.

It will ask for confirmation for each of the file. You can enter y to delete the file and n for skipping the deletion.

rm: remove regular file 'file1.txt'? y rm: remove regular file 'file2.txt'? n

You just learned to delete files in the terminal. Let’s see how to remove directories in Linux.

How to remove directories in Linux

There is a command called rmdir which is short for remove directory. However, this rmdir command can only be used for deleting empty directories.

If you try to delete a non-empty directory with rmdir, you’ll see an error message:

rmdir: failed to remove 'dir': Directory not empty

There is no rmdir force. You cannot force rmdir to delete non-empty directory.

This is why I am going to use the same rm command to delete folders as well. Remembering the rm command is a lot more useful than rmdir which in my opinion is not worth the trouble.

1. Remove an empty directory

To remove an empty directory, you can use the -d option. This is equivalent to the rmdir command and helps you ensure that the directory is empty before deleting it.

2. Remove directory with content

To remove directory with contents, you can use the recursive option with rm command.

This will delete all the contents of the directory including its sub-directories. If there are write-protected files and directories, you’ll be asked to confirm the deletion.

3. Force remove a directory and its content

If you want to avoid the confirmation prompt, you can force delete.

4. Remove multiple directories

You can also delete multiple directories at once with rm command.

Awesome! So now you know how to remove directory in Linux terminal.

Summary

Here’s a summary of the rm command and its usage for a quick reference.

Purpose	Command
Delete a single file	rm filename
Delete multiple files	rm file1 file2 file3
Force remove files	rm -f file1 file2 file3
Remove files interactively	rm -i *.txt
Remove an empty directory	rm -d dir
Remove a directory with its contents	rm -r dir
Remove multiple directories	rm -r dir1 dir 2 dir3

I hope you like this tutorial and learned to delete files and remove directories in Linux command line. If you have any questions or suggestions, please leave a comment below.

Источник

How to Delete a File or Directory in Linux – Command to Remove a Folder and its Contents

Shittu Olumide

In Linux, deleting files or directories is a fundamental operation that every user must know. Although it may seem like a straightforward task, there are different methods to delete files or directories, each with its specific use case.

This tutorial will provide a step-by-step guide on how to delete files or directories in Linux. We will also walk through the commands you can use to remove files and folders along with their content.

How to Delete a File in Linux

Deleting a file involves removing the reference to the file from the file system. The file itself is not immediately removed from the storage device, but its space is marked as available for reuse.

There are several ways to delete a file in Linux. Here are some of the most common methods:

Using the GUI file manager

Most Linux distributions come with a GUI file manager that allows you to delete files using a graphical interface. Simply navigate to the file you want to delete, right-click it, and select «Delete» or «Move to Trash.»

Using the rm command

You can also use the rm (remove) command to delete files and directories in Linux. To delete a file using the rm command, type the following command in the terminal:

Make sure you replace filename with the name of the file you want to delete. If the file is write-protected or you don’t have sufficient permissions to delete it, you will be prompted to confirm the deletion.

Using the shred command

The shred command is a more secure way to delete files by overwriting the file’s contents multiple times before deleting it. This makes it difficult for anyone to recover the deleted file.

To use the shred command, type the following command in the terminal:

Make sure to replace filename with the name of the file you want to delete. The -u option tells shred to delete the file after overwriting it.

Using the trash-cli command

The trash-cli command provides a safer way to delete files by moving them to the trash instead of immediately deleting them. To be able to use the trash-cli command, you install it first:

sudo apt-get install trash-cli 

After installation, you can delete a file using the following command:

How to Delete a Directory in Linux

To delete a directory in Linux, you can use the rmdir or rm command. You use the rmdir command to remove an empty directory, while the rm command removes a directory and all its contents.

Using the rm command

Here are the steps to delete a directory in Linux using the rm command:

1. Open the terminal: To delete a directory in Linux, you need to use the command line. Open the terminal by pressing «Ctrl+Alt+T» on your keyboard or by searching for «terminal» in your system’s application launcher.
2. Navigate to the directory you want to delete: Use the cd command to navigate to the directory you want to delete. For example, if the directory you want to delete is called my_directory and is located in your home folder, type cd ~/my_directory and press «Enter».
3. Check the contents of the directory: Before deleting the directory, it is a good idea to check its contents to make sure you are deleting the right directory. Use the ls command to list the contents of the directory. For example, type ls and press «Enter» to see the files and folders inside the my_directory folder.
4. Delete the directory and its contents: To delete the directory and all its contents, use the rm command with the -r option, which stands for recursive. Type rm -r my_directory and press «Enter». You will be prompted to confirm the deletion. Type y and press «Enter» to confirm.
5. Verify that the directory has been deleted: To verify that the directory has been deleted, use the ls command to list the contents of the parent directory. For example, if the my_directory folder was located in your home folder, type ls ~/ and press «Enter». The my_directory folder should no longer be listed.

Note: Be very careful when using the rm -r command, as it can delete files and directories irreversibly.

Using the rmdir command

Here are the steps to delete a directory in Linux using the rmdir command:

1. Open the terminal: Open the terminal by pressing «Ctrl+Alt+T» on your keyboard or by searching for «terminal» in your system’s application launcher.
2. Navigate to the directory you want to delete: Use the cd command to navigate to the directory you want to delete. For example, if the directory you want to delete is called my_directory and is located in your home folder, type cd ~/my_directory and press «Enter».
3. Delete the directory: To delete the directory, use the rmdir command followed by the name of the directory. Type rmdir my_directory and press «Enter». If the directory is not empty, you will receive an error message and the directory will not be deleted.
4. Verify that the directory has been deleted: To verify that the directory has been deleted, use the ls command to list the contents of the parent directory. For example, if the my_directory folder was located in your home folder, type ls ~/ and press «Enter». The my_directory folder should no longer be listed.

Conclusion

The rm command is the most commonly used command for deleting files, while the rmdir and rm commands with the -r or -R options are used for deleting directories. By following this step-by-step guide, you can now effectively delete files or directories in Linux.

1. Be careful when using the rm command with the -r or -R option as it can delete files and directories irreversibly.
2. Always double-check the file or directory name before deleting to avoid accidentally deleting the wrong file or directory.
3. Use the shred command only when necessary, as it can take longer to delete files than other methods.
4. Be mindful of file permissions when deleting files or directories, as some files or directories may require root access to delete.

Let’s connect on Twitter and on LinkedIn. You can also subscribe to my YouTube channel.

Источник

How to remove files and directories quickly via terminal (bash shell) [closed]

Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.

This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.

From a terminal window: When I use the rm command it can only remove files.
When I use the rmdir command it only removes empty folders. If I have a directory nested with files and folders within folders with files and so on, is there a way to delete all the files and folders without all the strenuous command typing? If it makes a difference, I am using the Mac Bash shell from a terminal, not Microsoft DOS or Linux.

Just in case you wish to restore the files in future , don’t use «rm» for such cases . Use «rm-trash» : github.com/nateshmbhat/rm-trash

4 Answers 4

-r «recursive» -f «force» (suppress confirmation messages)

+1 and glad you added the «Be careful!» part. definitely a «Sawzall» command that can quickly turn a good day into a bad one.. if wielded carelessly.

@itsmatt: You know what they say. give someone a Sawzall, and suddenly every problem looks like hours of fun!

On a Mac? Do this instead: brew install trash then trash -rf some_dir This will move the unwanted directory into your trashbin instead of just vanishing Prestige-style into the ether. (source)

Would remove everything (folders & files) in the current directory.

But be careful! Only execute this command if you are absolutely sure, that you are in the right directory.

Yes, there is. The -r option tells rm to be recursive, and remove the entire file hierarchy rooted at its arguments; in other words, if given a directory, it will remove all of its contents and then perform what is effectively an rmdir .

The other two options you should know are -i and -f . -i stands for interactive; it makes rm prompt you before deleting each and every file. -f stands for force; it goes ahead and deletes everything without asking. -i is safer, but -f is faster; only use it if you’re absolutely sure you’re deleting the right thing. You can specify these with -r or not; it’s an independent setting.

And as usual, you can combine switches: rm -r -i is just rm -ri , and rm -r -f is rm -rf .

Also note that what you’re learning applies to bash on every Unix OS: OS X, Linux, FreeBSD, etc. In fact, rm ‘s syntax is the same in pretty much every shell on every Unix OS. OS X, under the hood, is really a BSD Unix system.

Источник