How to make iso file linux

How to create an ISO image from a bunch of files on the file system?

Considering I have a bunch of files in a directory, I would like to bundle them into an ISO image file. How should I proceed to do that?

6 Answers 6

  1. Boot up Linux.
  2. Go to a terminal screen. You can usually right click on the desktop and choose this option from the drop-down menu. 3A. Type dd if=/dev/cdrom of=~/cdrom_image.iso . OR 3B. Type mkisofs -o /tmp/cd.iso /tmp/directory/ To make an ISO from files on your hard drive.

You must have permission to access the drive directly using dd . mount permissions are not necessarily the same as dd permissions! Also. when creating an ISO file, the device must not be mounted. To unmount the cdrom device, use the umount command as follows:

You may also use sudo to ensure you have proper permissions, but this also means you must have sudo access on the system. Check the /etc/sudoers file for information.

Step 4 is the correct solution to the original question. sudo should not be required for this. Remember to move cd.iso to whatever folder Wine/PlayonLinux needs for installation!

«4 type «mkisofs -o /tmp/cd.iso /tmp/directory/» To make an ISO from files on your hard drive.» worked greatly, thanks

To preserve long file names, mkisofs -r -o /tmp/cd.iso /tmp/directory/ (enables Rock Ridge protocol).

To have long file names in Windows, the -r is not enough, and you need to add a -J also (for Joliet), so mkisofs -r -J -o /tmp/cd.iso /tmp/directory/ .

It’s easy to create ISO in terminal as described in other answers but there are some GUI options too, Like Brasero. If you don’t already have it, you can install it using:

How can I create ISO images with Brasero?

enter image description here

  • Hit the Super key (Windows key) and search for «brasero» and open it.
  • Click on the Data project button.
  • Click on the green plus button in the upper left corner in the toolbar to start adding files and directories to your image:

enter image description here

  • Enter the name of disc at the bottom to whatever you like.
  • Make sure no empty CD/DVD is in your optical drives and click on Burn.
  • Brasero will ask you for the location where you want to create ISO image, Give your desired location and click on Create Image . That’s it!

If you want to burn that image to disc, Just right click on ISO image you just created and select «Open With Brasero Disc Burner». Select your optical drive and click Create Image .

Источник

How to Create an ISO File in Ubuntu 18.04 LTS

Ubuntu ISO File

Most operating system and programs especially large one comes in an ISO format containing all required installation files. An ISO file or an ISO image is a perfect representation of all file and folders contained in a CD /DVD. Alternatively, you can say that it is a package all installation files and folder in one single file in an ISO format.

Читайте также:  Linux обновить права пользователя

You can easily back up or archive the files and folders into an ISO file. You can make that ISO file to act it as an external drive, make bootable USBs or CD/DVD to later use for installation, save as a backup or distributing it over to someone.

  • Create an installation disc by Burning to USB or CD/DVD.
  • Mount as a virtual drive.
  • Use for installation of OS or software programs.

In this article, I will describe some ways to create an ISO file in Ubuntu 18.04 LTS.

Using Mkisofs utility

Under Linux, you can create an ISO image from a folder using a command line argument with the Mkisofs utility. You can use Mkisofs to automatically backup the data with the option to exclude some individual files if necessary. It supports wildcards as well.

The basic syntax of the command is:

$ mkisofs -o [filename.iso] [ directory_path]

-o defines the file name of the ISO you want to create followed by the directory you want to backup or store an ISO file.

For instance, I want to create an ISO file from the directory /home/tin/Documents/backup and save it as backup.iso file:

$ mkisofs –o backup.iso /home/tin/Documents/backup

Use mkisofs to make a ISO file

It will create the backup.iso file and save it in the current directory.

Using dd command in Terminal to build an ISO file

Basically using dd command, we can create copies of data whether they are file or folders, partitions, or CD/DVDs. We can also make use of dd command to create ISO files.

The basic syntax of dd command is:

If= Tells command from where to input the source data.

Of= Tells command where to define the output.

For instance, I will type the following command to copy and save the contents of the drive as an ISO file named diskimage.iso:

$ sudo dd if= /dev/sdb of= diskimage.iso

Make ISO file with dd command

The ISO image named diskimage.iso will be created in the current directory.

Using Brasero utility to make an ISO file

You can use Linux disk burning utility Brasero to create an ISO file. Older versions of Ubuntu include built-in Brasero utility. However, in 16.04 and the newer version, you have to manually install this utility.

To install Brasero, press Ctrl+Alt+T to launch Terminal.

Enter the following command in Terminal:

$ sudo apt-get install brasero

Install Brasero

Once you have done with the installation, open the application.

To open the Brasero application, Press windows key or click on dash icon in the bottom left corner of the desktop to open Dash menu.

Open Brasero

Then search for Brasero application by typing its name in the search bar. When the application appears, click on it to open it.

The Brasero Icon looks like this

In the Brasero application window, click on the Data project option.

Create Data project in Brasero

Then click on the + icon to start adding files to the new project.

Add files to Data project

From the window that appears, select the individual files or directories then click on Add.

Читайте также:  Linux metro last light нет звука

Add folder

You will notice that files are added in the application. Click on Burn.

New Data Disc Project

Choose the location to save the ISO file. Specify the name for the ISO file with .iso extension and click on Create Image.

Create Image

Once finished, you will be notified that the image has been successfully created.

Data Image successfully created

Hence all above were the different ways using which you can create ISO files. Once you have ISO file, you can save it as a backup, use it as virtual CD/DVD, burn it on USB or CD/DVD and share it with someone.

Источник

2 Ways to Create an ISO Image File in Linux

An ISO image file is an archive of files and directories compressed using the ISO 9660 format. It is suitable for writing CD or DVD discs, sector by sector.

When you download an operating system or even some games, they give you their ISO image file. Either you can uncompress/mount them on your system or burn a CD/DVD disc using the ISO image file.

However, we have already written a detailed guide on how to mount and unmount an ISO image on Linux. Therefore, today’s focus will be on creating an ISO image file from a collection of files or media devices in Linux.

How to Create an ISO Image File in Linux

In Linux, you will get two commands to create an ISO image file: dd (abbreviation of Data Definition) and the mkisofs command.

Does dd create an ISO image? The dd command is commonly used for copying or converting files. However, you can use the same command to create an ISO image from a media device connected to your system, like CD/DVD discs.

What are mkisofs used for? It is used to create an ISO image file from a bunch of files located in your system for writing to CDs or DVDs.

Prerequisite

First, you need to insert the media devices like CDs or DVDs and find the full path to these devices using the df command.

[email protected]:~$ df Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 810756 2028 808728 1% /run /dev/sda3 102106072 10405360 86467868 11% / tmpfs 4053768 0 4053768 0% /dev/shm tmpfs 5120 4 5116 1% /run/lock /dev/sda2 524252 5364 518888 2% /boot/efi tmpfs 810752 116 810636 1% /run/user/1001 /dev/sdb1 iso9660 2.2G 2.2G 0 100% /media/trendoceans/Ubuntu 

However, if you want to create an ISO image file from a group of files and directories stored on your machine, find the path to that directory using the pwd command.

The GNU/Linux pwd command is used for finding the full path of a directory with a bunch of files

Once you have the location of the file, you can continue to perform any of the below steps to create an ISO image file from a bunch of files or directories in Linux.

Using the dd command

The dd command is a utility for Linux systems that provides you with features like converting and copying files from two different sources.

On the Linux system, hardware devices or special device files (like /dev/zero and /dev/random ) are usually mapped as system files.

The dd command has the capability to read or write these files and perform tasks such as backing up the boot sector of a hard drive.

It can also perform conversions on the data as it is copied, including byte order swapping and conversion to and from the ASCII and EBCDIC text encodings.

The same command can easily create an ISO image file from the inserted disc on your machine. Just use the following command and do not forget to replace the mount location with your own.

$ sudo dd if=/dev/sdb1 of=/home/trendoceans/Documents/ubuntu.iso
  • if requires the mount location of the media devices (CD or DVD) instead of stdin.
  • of requires the location to save the ISO image file instead of stdout.

Using the mkisofs command

The mkisofs command is used to create an ISO file from a directory containing a bunch of files that can be used to burn CDs or DVDs later.

For example, you have a directory located at /home/trendoceans/mydir/ which contains a lot of files, and you want to create an ISO image file of that directory.

For that, you can use the mkisofs command with the -o option, specifying the location to save the ISO file and the path of the directory containing the bunch of files, as shown below.

$ mkisofs -o ~/image.iso /home/trendoceans/mydir/ $ ls -lah image.iso

Below is the output of the above command.

Creating an ISO Image File from a Collection of Files in Linux Using the mkisofs Command

These are the two methods used to create an ISO image file from the command line. However, if you have any queries regarding the topic, feel free to comment.

Innovative tech mind with 12 years of experience working as a computer programmer, web developer, and security researcher. Capable of working with a variety of technology and software solutions, and managing databases.

Источник

How to Create and Use ISO Files on Linux

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 11 people, some anonymous, worked to edit and improve it over time.

This article has been viewed 26,257 times.

Learn how to create, mount, or burn ISO images using Linux. Most Linux distributions come with software to create, mount, or burn ISO images. Using these steps, you will learn to do this, and maybe even understand how it works.

Creating an ISO

    You can replace cdrom.iso with a filename you choose for the iso, or replace /mnt/cdrom with the location of the cd device on your system. Some Linux systems show it as /mnt/sr0.

Image titled Create and Use ISO Files on Linux Step 1Bullet1

Mounting an ISO

Image titled Create and Use ISO Files on Linux Step 2Bullet1

Image titled Create and Use ISO Files on Linux Step 3Bullet1

Burning an ISO

Image titled Create and Use ISO Files on Linux Step 4Bullet1

Image titled Create and Use ISO Files on Linux Step 4Bullet2

Image titled Create and Use ISO Files on Linux Step 5

    In some systems that have only one DVD/CD writer, you can simply Run the command "sudo cdrecord cdrom.iso"

Image titled Create and Use ISO Files on Linux Step 5Bullet1

Image titled Create and Use ISO Files on Linux Step 5Bullet2

Expert Q&A

For more information regarding a specific command, consult the Linux man pages. For example, the command "man mount" will display all of the information your system has about the mount command.

It is easier to burn an ISO using the graphical software that comes with your distribution, this can be done by right clicking the ISO file, and opening it with Brasero(Ubuntu), or by double clicking on it(Fedora).

You Might Also Like

Move from Windows to Linux

Change the Root Password in Linux

Install Google Chrome Using Terminal on Linux

Can Linux Run Exe

Can Linux Run .exe Files? How to Run Windows Software on Linux

Add or Change the Default Gateway in Linux

Open Ports in Linux Server Firewall

How to Open Linux Firewall Ports: Ubuntu, Debian, & More

Become Root in Linux

Take a Screenshot in Linux

Execute INSTALL.sh Files in Linux Using Terminal

How to Run an INSTALL.sh Script on Linux in 4 Easy Steps

Ping in Linux

Use Ping in Linux: Tutorial, Examples, & Interpreting Results

Boot Linux from a USB on Windows 10

Delete Read Only Files in Linux

How to Delete Read-Only Files in Linux

Источник

Оцените статью
Adblock
detector