How to reboot linux command

How do I shut down or reboot from a terminal?

Appendix: If your keyboard is «locked up», so you can’t enter a command like «reboot» which would run from «su» anyway, use the keyboard: hold down Alt + PrintScreen/SysRq , buttons and type «REISUB». It doesn’t have to be capital letters. It will restart your computer gently. http://blog.kember.net/articles/reisub-the-gentle-linux-restart/

@NicolasRaoul nopes, for me i see this without sudo . Failed to set wall message, ignoring: Interactive authentication required. Failed to reboot system via logind: Interactive authentication required. Failed to open /dev/initctl: Permission denied Failed to talk to init daemon.

Open your terminal with CTRL + ALT + T and do these following commands

& one more command for restart:

Another way as one of the user mentioned.

You can get more info on the shutdown command by using one of the following:

Can anyone explain why sudo halt might not perform shutdown in some cases, whereas sudo halt -p does?

Hate passwords ( sudo ) and love one-liners?

For Ubuntu 15.04 and later

This is due to Ubuntu’s shift in using systemd instead of Upstart

systemctl poweroff systemctl reboot systemctl suspend systemctl hibernate systemctl hybrid-sleep 

Since hibernate is normally disabled by default in Ubuntu systems, you can enable this by checking this answer.

For Ubuntu 14.10 or earlier

/usr/bin/dbus-send --system --print-reply --dest="org.freedesktop.ConsoleKit" /org/freedesktop/ConsoleKit/Manager org.freedesktop.ConsoleKit.Manager.Stop 

/usr/bin/dbus-send --system --print-reply --dest="org.freedesktop.ConsoleKit" /org/freedesktop/ConsoleKit/Manager org.freedesktop.ConsoleKit.Manager.Restart 

Other commands you may like:

/usr/bin/dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Suspend 

Hibernate: (if enabled on your system)

/usr/bin/dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Hibernate 

On 16.04 no need of sudo

sudo shutdown -h (time) (message) 

This will shutdown your computer and halt it. That is what the -h is for. Then, in the time area you can choose the shutdown delay (in minutes) and if you want you can send a broadcast message in the message area (like goodbye, or I’m shutting the thing down :P).

To restart the computer, type

sudo shutdown -r (time) (message) 

Now, instead of shutting it down and halting it, you will restart your computer once it’s shutdown. 🙂

Источник

5 Linux Commands to Shutdown and Reboot the System

On Linux, like all tasks, the shutdown and restart operations can also be done from the command line.

The commands are shutdown, halt, poweroff, reboot and REISUB keystrokes.

In this post I am going to show you how to shutdown or restart a linux system using these commands.

The commands are useful specially when you have to reboot a remote linux server, where only shell access is available and no gui.

Servers often need a restart when upgrades are installed or need to shutdown for other maintainance tasks.

The commands are available on any linux system like centos, ubuntu, debian, fedora or suse and do not require the installation of any extra packages.

1. «shutdown» command

The first command is the shutdown command and it can be used to shutdown a system or restart it. It is commonly used to shutdown or reboot both local and remote machines.

shutdown arranges for the system to be brought down in a safe way. All logged-in users are notified that the system is going down and, within the last five minutes of TIME, new logins are prevented.

shutdown [OPTION] [TIME] [MESSAGE]

To shutdown a machine call the shutdown command like this

The h option is for halt which means to stop. The second parameter is the time parameter. «now» means that shutdown the system right away.

The time parameter can be specified in minutes or hours also. For example

# shutdown -h +5 "Server is going down for upgrade. Please save your work."

The above command shall flash the message to all other logged in users and give them 5 minutes before the system goes for shutdown.

The shutdown command can be used to restart a system with the r option instead of the h option. Usage is same as before. Just replace the h option with r option.

# shutdown -r +5 "Server will restart in 5 minutes. Please save your work."

All other logged in users will see a broadcast message in their terminal like this

[[email protected] ~]# Broadcast message from [email protected] (/dev/tty1) at 21:35 . The system is going down for reboot in 5 minutes! Server will restart in 5 minutes. Please save your work.

At this point a shutdown can be cancelled by calling shutdown with «c» option.

2. «reboot» command

Next command is the reboot command. It can be used to shutdown or reboot linux.

The following command will shutdown linux.

The «p» options stands for poweroff.

To reboot linux just call the reboot command directly without any options.

This will perform a graceful shutdown and restart of the machine. This is what happens when you click restart from your menu.

Reboot linux forcibly

The following command will forcefully reboot the machine. This is similar to pressing the power button of the CPU. No shutdown takes place. The system will reset instantly.

The man page explains it as follows

When called with --force or when in runlevel 0 or 6, this tool invokes the reboot(2) system call itself (with REBOOTCOMMAND argument passed) and directly reboots the system. Otherwise this simply invokes the shutdown(8) tool with the appropriate arguments without passing REBOOTCOMMAND argument.

3. «halt» command

The next command is the halt command. This can shutdown a system

The halt command also has a force option, but you do not want to use it. It is supposed to shutdown the system instantly. But its behaviour may not be consistent. Desktops might hang on running this command.

4. «poweroff» command

There is another command exactly same as the halt command. It does the same things and takes the same options.

5. REISUB — R E I S U B key strokes

The above shown commands can be used when you are in control of your system. What if the system has hanged and is not responding at all. And you do not want to press the power button on the CPU which might lead to data corruption. To save from such a situation, comes the magic sysRQ keys.

A special combination of key presses that will allow you to reboot your linux system, no matter how much it is hanged. Check the wikipedia article. for more information.

A common use of the magic SysRq key is to perform a safe reboot of a Linux computer which has otherwise locked up. This can prevent a fsck being required on reboot and gives some programs a chance to save emergency backups of unsaved work.

Warning : Pressing the following keys would instantly reboot your system. Its similar to pressing the power button of your CPU or executing the reboot -f command.

Now in place of the B key we have to use R E I S U letters first. Each key does a task as mentioned below

unRaw (take control of keyboard back from X), tErminate (send SIGTERM to all processes, allowing them to terminate gracefully), kIll (send SIGKILL to all processes, forcing them to terminate immediately), Sync (flush data to disk), Unmount (remount all filesystems read-only), reBoot.

1. Hold down the Alt and SysRq (Print Screen) keys.
2. While holding those down, type the following keys in order, several seconds apart: R E I S U B
3. Computer should reboot.

Make sure to have some time gap between each of keys R E I S U B.

The sysrq feature can be controlled by changing the value of /proc/sys/kernel/sysrq. To check if sysrq is enabled on the system or not, echo the value. It should be non zero.

$ cat /proc/sys/kernel/sysrq 176

A Tech Enthusiast, Blogger, Linux Fan and a Software Developer. Writes about Computer hardware, Linux and Open Source software and coding in Python, Php and Javascript. He can be reached at [email protected] .

10 Comments

Источник

How to Restart or Reboot Linux Server from the Command Line

It’s a cliché, but true – restarting a Linux server solves a wide variety of issues.

When a system is rebooted, any malfunctioning software is purged from active memory. When the system restarts, it loads a fresh, clean copy of the software into active memory. Also, some operating systems require a restart to process updates or configuration changes.

This guide will show you how to restart a Linux server using only the command-line or prompt.

• A system running a Linux operating system
• Access to a command-line interface (also known as a terminal)
• Root or sudo privileges
• (optional) SSH software package for communicating with a remote server

Steps to Restart Linux using Command Prompt

Restarting Local Linux Operating System

Step 1: Open Terminal Window

If your version of Linux uses a graphical interface, you can open a terminal window by right-clicking the Desktop > left-clicking Open in terminal.

You can also click the main menu (usually found in the lower-left or upper-left corner) and type in terminal in the search bar. Click on the Terminal icon, as in the image below.

Step 2: Use the shutdown Command

Since powering off is one of the most basic functions of an operating system, this command should work for most distributions of Linux.

In a terminal window, type the following:

The sudo command tells Linux to run the command as an administrator, so you may need to type your password. The -r switch at the end indicates that you want the machine to restart.

Note: See our article for additional Linux shutdown command options.

Alternative Option: Restart Linux with reboot Command

Many Linux versions do not require administrator privileges to reboot. If you get a message that you do not have sufficient privileges, type:

Your system should close out of all open applications and restart.

Reboot Remote Linux Server

Step 1: Open Command Prompt

If you have a graphical interface, open the terminal by right-clicking the Desktop > left-clicking Open in terminal.

You can also click the main menu (usually found in the lower-left or upper-left corner), and then click Applications > System Tools > Terminal.

If you prefer using a keyboard shortcut, press Ctrl+Alt+T.

Step 2: Use SSH Connection Issue reboot Command

In a terminal window, type:

ssh -t user@server.com 'sudo reboot'

Note: You may need to enter the password for the username you’ve used. Also, make sure you type the single-quote marks.

The ssh command tells your system to connect to another machine. The -t option forces the remote system to enter the command in a terminal. Replace user@server.com with the username @ server name that you want to restart.

The sudo reboot command can be switched out for sudo shutdown and the above options above can be used.

That is: -r tells it to restart, hh:mm sets a specific time, +mm sets a countdown.)

In this tutorial, you have learned how to restart a Linux server from the command prompt.

Rebooting a Linux system or server is designed to be simple, so you shouldn’t have any trouble. Just make sure you have saved all your work before restarting.

Источник