How to wifi signal strength

How to Measure Your Wi-Fi Signal Strength

An MIT graduate who brings years of technical experience to articles on SEO, computers, and wireless networking.

Ryan Perian is a certified IT specialist who holds numerous IT certifications and has 12+ years’ experience working in the IT industry support and management positions.

In This Article

What to Know

• In Windows, go to Network and Internet >Network and Sharing Center. Select the blue Wi-Fi link to see the signal strength.
• On Mac, the Wi-Fi indicator is located in the upper-right corner of the screen in the menu bar.
• On Linux systems, use the following command: iwconfig wlan0 | grep -i —color signal.

This guide explains how to check Wi-Fi signal strength on a variety of platforms. These instructions apply to currently supported versions of Windows, Mac, Linux, iOS, and Android.

How to Measure Your Wi-Fi Signal Strength

The performance of a Wi-Fi wireless network connection depends on the radio signal strength. On the path between the wireless access point and a connected device, the signal strength in each direction determines the data rate available on that link.

Use the following methods to determine the signal strength of your Wi-Fi connection and find ways to improve the Wi-Fi reception of your connected devices. Different tools may show different results. These variations are caused by differences in how the utilities collect samples and the timing used to report an overall rating.

Network bandwidth isn’t the same as signal strength. Network bandwidth is the speed you get from your internet service provider (ISP). Signal strength determines the functionality of the hardware connected to the network and the range a Wi-Fi network typically has throughout an area.

Use a Built-in Operating System Utility

Microsoft Windows and other operating systems contain a built-in utility to monitor wireless network connections. This is the quickest and easiest way to measure Wi-Fi strength.

In newer versions of Windows, select the network icon on the taskbar to see the wireless network you’re connected to. Five bars indicate the signal strength of the connection—one bar is the poorest connection, and five is the best.

To find the network connection in modern versions of Windows, open Control Panel and go to Network and Internet > Network and Sharing Center, and select the blue Wi-Fi link to see the Wi-Fi strength.

On a Mac, the Wi-Fi indicator is located in the upper-right corner of the screen in the menu bar. One bar is the poorest connection, and three is the best.

On Linux systems, use the following command to display the signal level in the terminal window:

iwconfig wlan0 | grep -i —color signal

The output in terminal is displayed as a dB value. The more negative the value, the worse the signal strength. Anything from -50 dBm to -70 dBm is considered great to decent signal strength.

Use a Smartphone or Tablet

Any mobile device that is internet capable has a section in the settings that shows the strength of the Wi-Fi networks in range. For example, on an iPhone, open the Settings app and go to Wi-Fi to see the Wi-Fi strength of the network you’re on and the signal strength of any network that’s in range.

A similar method can be used on an Android phone or tablet. Look under a Settings, Wi-Fi, or Network menu. For example, in the settings on a Google Pixel with Android 10, select Network & internet, select the Wi-Fi you’re using, and then select the gear icon next to the network you’re connected to. There you can see the signal strength.

Another option is to download a free app such as Wifi Analyzer for Android, which shows the Wi-Fi strength visually in dBm compared to other nearby networks. Similar options are available for other platforms.

Open Your Wireless Adapter’s Utility Program

Some manufacturers of wireless network hardware or notebook computers provide software applications that monitor wireless signal strength. These applications report signal strength and quality based on a percentage from zero to 100 percent and additional detail tailored specifically to the hardware.

The operating system utility and the vendor hardware utility may display the same information in different formats. For example, a connection with an excellent 5-bar rating in Windows may show in the vendor software as excellent with a percentage rating anywhere between 80 and 100 percent. Vendor utilities can often tap into extra hardware instrumentation to precisely calculate radio signal levels as measured in decibels (dB).

Wi-Fi Locators Are Another Option

A Wi-Fi locator device scans radio frequencies in the local area and detects the signal strength of nearby wireless access points. Wi-Fi locators exist in the form of small hardware gadgets that fit on a keychain.

Most Wi-Fi locators use a set of between four and six LEDs to indicate signal strength in units of bars similar to the Windows utility. Unlike the above methods, however, Wi-Fi locator devices do not measure the strength of a connection but instead, only predict the strength of a connection.

To boost a Wi-Fi signal, try repositioning your router to avoid interference. You can also change the Wi-Fi channel numbers, update your router firmware, upgrade the antennas on your router, add a signal amplifier, use a wireless access point, or try a Wi-Fi extender.

Reset your Wi-Fi by restarting your router and modem. Unplug the router and modem and wait about 30 seconds. Then, plug in the modem and power it on. Wait 60 seconds, plug in the router, and power it on. Wait about two minutes before testing or using the devices.

To find your Wi-Fi password in Windows 10, navigate to the Network and Sharing Center, select Connections, and your network. In Wireless Network Properties, go to Security, select Show characters, and view the Wi-Fi password. On a Mac, access the Keychain Access app and select System > Passwords; double-click the network > Show password.

Источник

How to determine Wi-Fi signal strength on Windows 10

You can check the Wi-Fi signal strength to find out the connection performance, and in this guide, you’ll learn the steps to perform this task on Windows 10.

On Windows 10, when you connect a device to the internet to work from home or office using a Wi-Fi adapter, the quality of the signal will dictate the overall performance of the connection. In part, it’s because wireless technology uses radio waves to connect a device to the access point, and similar to other radio signals, it has limited range and problems with interference as well as traveling through solid objects (such as walls).

Understanding the signal strength of the Wi-Fi connection on your laptop or desktop PC can help to determine if the slow connectivity is a signal problem and not an issue with your Internet Service Provider (ISP) or wireless access point (usually, your router).

You may be able to find many third-party tools, but Windows 10 includes several ways to check the signal strength of a wireless connection from the taskbar and using the Settings app, Control Panel, taskbar, Command Prompt, and even using PowerShell.

In this Windows 10 guide, you’ll learn five ways to determine the signal strength of your Wi-Fi connection.

How to check Wi-Fi signal strength using taskbar

To determine the signal strength of a Wi-Fi connection on Windows 10, use these steps:

1. Click the network icon in the notification area of the taskbar.
2. See the wireless icon next to the network. (The higher the number of solid bars means the stronger the signal.)

When looking at the wireless icon, one solid bar indicates that the signal is weak, two bars mean the signal is acceptable, and three and four bars represent the best signal you can get.

How to check Wi-Fi signal strength using Settings

To find out the wireless signal strength using Settings, use these steps:

1. Open Settings.
2. Click on Network & Internet.
3. Click on Status.
4. Under the «Network status» section, the wireless icon will indicate the current signal strength. (The higher the number of solid bars, the stronger the signal.)

Alternatively, you can also check the signal strength from the Wi-Fi settings page.

Check signal quality from Wi-Fi settings

To check the wireless signal from the Wi-Fi settings, use these steps:

1. Open Settings.
2. Click on Wi-Fi.
3. Under the Wi-Fi section, the signal strength will be represented on the wireless icon. (The higher the number of solid bars, the stronger the signal.)

Once you complete the steps, you’ll have a better understanding of wireless connection quality to the access point.

How to check Wi-Fi signal strength using Control Panel

To find out the signal quality of a wireless connection using Control Panel, use these steps:

1. Open Control Panel.
2. Click on Network and Internet.

1. Click on Network and Sharing Center.

1. Under the «View your active networks» section, the wireless icon next to «Connections» will indicate the signal quality.

1. (Optional) Click the connection name to check the signal quality as well as speed, SSID, and other information.

After you complete the steps, you’ll know if you have a strong or weak Wi-Fi connection.

How to check Wi-Fi signal strength using Command Prompt

To check the signal strength of a Wi-Fi connection using Command Prompt, use these steps:

1. Open Start.
2. Search for Command Prompt and click the top result to open the app.
3. Type the following command to view the Wi-Fi signal strength and press Enter: netsh wlan show interfaces
4. See the Signal field to determine the signal quality. (If the output number is equal or higher than 80, then the strength of the signal is good.)

Once you complete the steps, you’ll quickly find out the quality of the Wi-Fi signal.

How to check Wi-Fi signal strength using PowerShell

To view the signal strength of a Wi-Fi connection using PowerShell, use these steps:

1. Open Start.
2. Search for PowerShell and click the top result to open the app.
3. Type the following command to view the Wi-Fi signal strength and press Enter: (netsh wlan show interfaces) -Match ‘^\s+Signal’ -Replace ‘^\s+Signal\s+:\s+’,» Quick tip: Similar to Command Prompt, in PowerShell, you can also run the netsh wlan show interfaces command to view signal quality.
4. See the signal quality output. (The percentage goes from 0 to 100, where 100 percent indicates excellent signal quality.)

Once you complete the steps, if you see a signal quality between 80 and 100 percent, then the connection is reliable. If you see a signal above 70 percent, it’s still good for light web browsing and managing emails. Anything below 60 percent means that you have a weak signal, and you should consider moving the device closer to the access point or relocating the access point to the middle of the house or office.

If you’re trying to determine the perfect placement on the house or office for the best signal, run the above command where you typically use your computer, then move around to another place or room, and re-run the command to find out the signal strength in the new location.

In the case that you’re viewing the Wi-Fi icon to find out the performance of the connection, consider that each bar (including the dot) represents around 25 percent of signal strength. This means that three and four bars indicate a good signal quality and anything below indicates a weak signal.

Get the Windows Central Newsletter

All the latest news, reviews, and guides for Windows and Xbox diehards.

By submitting your information you agree to the Terms & Conditions and Privacy Policy and are aged 16 or over.

Источник