Install appimage arch linux

ArchPKGs

How to Install (Update/Uninstall) via-appimage on Arch Linux/Manjaro/ArcoLinux

According to via-appimage ‘s outline, it’s «Your keyboard’s best friend.». To install via-appimage from AUR (Arch User Repository) on Arch Linux and Arch-based distributions (e.g. Manjaro, EndeavourOS, RebornOS, Garuda) is relatively uncomplicated. This tutorial will cover how to install, update and remove the package with either the built-in package manager pacman or an AUR helper like yay .

Table of Contents

Install via-appimage link

Two common methods are used to install via-appimage from AUR. pacman is what you are looking for if you’re a veteran in command-line interface and know the concept of how packages are built. If not, yay is a common alternative to install packages without the necessity to review PKGBUILD and build packages with makepkg by yourself.

Install with Pacman (Default) link

sudo pacman -S --needed git && git clone https://aur.archlinux.org/via-appimage.git && cd via-appimage && makepkg -sicontent_copy

1. Install git if it’s not on your system.
2. clone the package’s git repository from source.
3. cd into the directory.
4. Use makepkg to build the package. Also, it will automatically be installed with pacman afterwards.

Install with Yay (Beginner Friendly) link

yay -S via-appimagecontent_copy

Update via-appimage link

Updating AUR packages is pretty much the same as installing them. Simply pull it from AUR then re-build it. However, it is still recommended to upgrade your whole system first with sudo pacman -Syu before updating any packages to avoid dependency issues, since Arch is a rolling-release Linux distro.

Update with Pacman (Default) link

git pull && makepkg -sicontent_copy

1. pull from the package’s git repository.
2. Use makepkg to build the package. Also, it will automatically be updated with pacman if built successfully.

Update with Yay (Beginner Friendly) link

Remove via-appimage link

Uninstalling packages is the most uncomplicated of these three,just choose whether to purge the unused dependencies and the configuration files used by the package.

Uninstall with Pacman (Default) link

sudo pacman -R via-appimagecontent_copy

sudo pacman -Rs via-appimagecontent_copy

sudo pacman -Rns via-appimagecontent_copy

Uninstall with Yay (Beginner Friendly) link

yay -R via-appimagecontent_copy

yay -Rs via-appimagecontent_copy

yay -Rns via-appimagecontent_copy

For more details about how to install and update AUR packages on Arch-based distributions, please refer to this tutorial published on NoCache.

More Guides

stendhal-bin Install (Update, Remove) Tutorial on Arch-Based Linux (Manjaro, Garuda)

stendhal-bin is «Stendhal is a fun friendly and free multiplayer online adventure game with an old school feel.» referring to its own outline. To install stendhal-bin from AUR (Arch User Repository) on Arch Linux and Arch-based Linux distros (e.g. Manjaro, EndeavourOS, BlackArch) is rather easy. This guide will be covering how to install, update and remove the package with either the default package manager pacman or an AUR helper like yay.

Installing catfish with CLI on Arch Linux, Manjaro and BlackArch

Referring to extra/catfish’s outline, it’s «Versatile file searching tool». To install and update extra/catfish from Arch official repository (Extra) on Arch Linux and Arch-based distros (e.g. Manjaro, EndeavourOS, Parabola, ArcoLinux) is relatively easy. This tutorial will show you step-by-step how to install, update and remove the package with either the default package manager pacman or an AUR helper (e.g. yay).

A Step-by-Step Guide on Installing pvoc on Arch Linux, Manjaro and BlackArch

extra/pvoc is «LADSPLA plugins and a tool for time compression/expansion using phase-vocoding» according to its own description. To get this package (extra/pvoc) from Arch official repository (Extra) on Arch Linux and Arch-based distributions (e.g. Manjaro, EndeavourOS, BlackArch, Parabola) is quite simple. This tutorial will show you step-by-step how to install, update and remove the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

A Straightforward Tutorial on Installing lib32-vulkan-extensionlayer-git on Arch Linux (Manjaro/EndeavourOS)

«Layer providing Vulkan features when native support is unavailable (library for 32-bit applications)» is the developer’s gist of lib32-vulkan-extensionlayer-git. To install and update this package (lib32-vulkan-extensionlayer-git) from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS and ArcoLinux is quite uncomplicated. This guide will show you step-by-step how to install, update and uninstall the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

How to Install qt5ct (Complete Tutorial) on Arch-Based Linux (Manjaro, Parabola)

extra/qt5ct is «Qt5 Configuration Utility» referring to its own outline. To install extra/qt5ct from Arch official repository (Extra) on Arch Linux, Manjaro, EndeavourOS, RebornOS, Artix and Parabola is fairly uncomplicated. This guide will be covering how to install/update/uninstall the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

Beginner’s Guide on Installing ghz on Arch Linux, Manjaro and Garuda

ghz is «Simple gRPC benchmarking and load testing tool» quoting from its own description. To install this package (ghz) from AUR (Arch User Repository) on Arch Linux and Arch-based distros (e.g. Manjaro, EndeavourOS, BlackArch) is pretty simple. This tutorial will show you step-by-step how to install, update and remove the package with either the default package manager pacman or an AUR helper like yay.

More guides… copyright 2023 ArchPKGs. All Rights Reserved.

Источник

Install appimage arch linux

Appimage. AppImage is a downloadable file for Linux that contains the application and everything it needs to run (libraries, icons, fonts, translations, etc.).

What it say on their websites:

EASY.
The key idea of the AppImage format is one app = one file. Every AppImage contains an app and all the files the app needs to run. In other words, each AppImage has no dependencies other than what is included in the targeted base operating system(s).

TRUSTED.
AppImage format is ideal for upstream packaging, which means that you get the software directly from the original author(s) without any intermediaries, exactly in the way the author(s) intended. And quickly.

FAST.
AppImages can be downloaded and run without installation or the need for root rights.

Installation in archlinux:
Appimage packages available on Archlinux User Repository. (AUR)
https://aur.archlinux.org/packages/appimage-git/

Installation from terminal:

$mkdir AUR
$cd AUR
$wget -c https://aur.archlinux.org/cgit/aur.git/snapshot/appimage-git.tar.gz
$tar -xvzf appimage-git.tar.gz
$cd appimage-git
$makepkg -s
$sudo pacman -U *.pkg.tar.xz

On terminal:
$chmod a+x downloadedfile.AppImage
Run:
./downloadedfile.AppImage

If you using file manager : (PCmanfm for this example).
Right click on downloaded.AppImage then properties, set permissions, change «Execute» to anyone, then ok.

That’s it. Now AppImage will ready to «double click» to run.. :), here for example, Caster Sound Board:

Источник

ArchPKGs

Beginner’s Guide on appimage-installer Installation on Arch Linux/Manjaro/ArcoLinux

appimage-installer is «AppImage install tool.» referring to its own definition. To install and update this package ( appimage-installer ) from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, Artix and Garuda is rather uncomplicated. This tutorial will cover how to install, update and uninstall the package with either the built-in package manager pacman or an AUR helper like yay .

Table of Contents

Install link

Two common methods are used to install appimage-installer from AUR. pacman is the way to go if you’re an experienced Linux user and have the knowledge of how packages are built. Otherwise, yay is a popular alternative to install packages without the trouble to review PKGBUILD and build packages with makepkg on your own.

Using pacman (Default Package Manager) link

sudo pacman -S --needed git && git clone https://aur.archlinux.org/appimage-installer.git && cd appimage-installer && makepkg -sicontent_copy

1. Install git if needed (not installed before).
2. clone the package’s git repository from upstream URL.
3. cd into the directory of the repository.
4. Use makepkg to build the package. Also, it will automatically be installed with pacman afterwards.

Using yay (Easier) link

yay -S appimage-installercontent_copy

Update link

Just like installing AUR packages, updating them is fairly the same. Simply pull it from upstream then re-build it. However, it is still a good practice to upgrade your whole system first with sudo pacman -Syu before updating any packages to avoid breaking your system, since Arch is a rolling-release Linux distribution.

Using pacman (Default Package Manager) link

git pull && makepkg -sicontent_copy

1. pull from the package’s git repository.
2. Use makepkg to build the package, then update it with pacman .

Using yay (Easier) link

Remove link

Uninstalling packages is the easiest of these three,all you need to do is choose whether to keep the dependencies that no longer required by other packages and the configuration files used by the package.

Using pacman (Default Package Manager) link

sudo pacman -R appimage-installercontent_copy

sudo pacman -Rs appimage-installercontent_copy

sudo pacman -Rns appimage-installercontent_copy

Using yay (Easier) link

yay -R appimage-installercontent_copy

yay -Rs appimage-installercontent_copy

yay -Rns appimage-installercontent_copy

For more information about how to build AUR packages on Arch-based Linux distributions, please refer to Two Ways to Install Packages from AUR from NoCache.

More Guides

Guide on Install/Update/Remove commontk-git on Arch Linux (Manjaro, RebornOS)

According to commontk-git’s own profile, it is «A set of common support code for medical imaging, surgical navigation, and related purposes.». To get commontk-git from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, ArcoLinux, Anarchy and Garuda is fairly straightforward. This guide will be covering how to install, update and uninstall the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

python-py-partiql-parser Install, Update and Uninstall Guide on Arch Linux, Manjaro and Anarchy

Quoting from extra/python-py-partiql-parser’s outline, it is «Python Parser for PartiQL». To install and update extra/python-py-partiql-parser from Arch official repository (Extra) on Arch Linux, Manjaro, EndeavourOS, Garuda, Artix, RebornOS and Parabola is fairly easy. This tutorial will taught you how to install/update/remove the package with either the default package manager pacman or an AUR helper like yay.

A Straightforward Guide on Installing breeze-extra-gnome on Arch-Based Linux (Manjaro, Anarchy)

Quoting from breeze-extra-gnome’s definition, it is «Breeze extra icons for GNOME & KDE». To install or uninstall breeze-extra-gnome from AUR (Arch User Repository) on Arch Linux and Arch-based distributions (e.g. Manjaro, EndeavourOS, Anarchy, Garuda, RebornOS, Artix) is rather easy. This tutorial will show you step-by-step how to install, update and remove the package with either the default package manager pacman or an AUR helper like yay.

Guide on Install, Update and Remove kmime on Arch Linux, Manjaro and RebornOS

extra/kmime is «Library for handling mail messages and newsgroup articles» based on its gist. To install or remove this package (extra/kmime) from Arch official repository (Extra) on Arch Linux, Manjaro, EndeavourOS, Parabola, Garuda and Artix is quite simple. This guide will taught you how to install/update/uninstall the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

wpscan-git Install (Update, Uninstall) Tutorial on Arch Linux (Manjaro/Anarchy)

wpscan-git is «Black box WordPress vulnerability scanner» quoting from its description. To get wpscan-git from AUR (Arch User Repository) on Arch Linux and Arch-based Linux distributions (e.g. Manjaro, EndeavourOS, BlackArch, RebornOS, Parabola, ArcoLinux) is quite uncomplicated. This tutorial will cover how to install, update and remove the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

Full Tutorial on Installing fry-git on Arch-Based Linux (Manjaro, EndeavourOS)

«A simple ruby version manager for fish» is the maintainer’s profile of fry-git. To install or uninstall this package (fry-git) from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS and RebornOS is fairly simple. This guide will cover how to install, update and remove the package with either the default package manager pacman or an AUR helper like yay.

More guides… copyright 2023 ArchPKGs. All Rights Reserved.

Источник