Install clion arch linux

ArchPKGs

Complete Tutorial on Installing clion on Arch Linux/Manjaro/Garuda

«C/C++ IDE. Free 30-day trial.» is their description of clion . To install and update this package ( clion ) from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS and ArcoLinux is quite easy. This guide will cover how to install/update/uninstall the package with either the built-in package manager pacman or an AUR helper like yay .

Table of Contents

Install link

Two well known ways are used to install clion from AUR. pacman is the choice for you if you’re comfortable using Arch-based distributions and know the concept of how packages are built. If not, yay is a common alternative to install packages without the hassle of reviewing PKGBUILD and build packages with makepkg by yourself.

Install with pacman (Default) link

sudo pacman -S --needed git && git clone https://aur.archlinux.org/clion.git && cd clion && makepkg -sicontent_copy

1. Install git if needed (not installed before).
2. clone the package’s git repository from AUR.
3. cd into the directory.
4. Build the package with makepkg , then install it with pacman .

Install with yay (AUR Helper) link

Update link

Just like installing AUR packages, updating them is fairly the same. Simply pull it from AUR then re-build it. Nevertheless, it is still a good practice to upgrade your whole system first with sudo pacman -Syu before updating any packages to avoid breaking your system, since Arch is a rolling-release Linux distro.

Update with pacman (Default) link

Before running the command, be sure you are in the directory of the repository you previously cloned:

git pull && makepkg -sicontent_copy

1. pull from the package’s git repository.
2. Use makepkg to build the package, then update it with pacman .

Update with yay (AUR Helper) link

Remove link

Uninstalling packages is the simplest of these three,all you have to do is choose whether to purge the unused dependencies and the configuration files used by the package.

Remove with pacman (Default) link

sudo pacman -R clioncontent_copy

sudo pacman -Rs clioncontent_copy

sudo pacman -Rns clioncontent_copy

Remove with yay (AUR Helper) link

yay -Rns clioncontent_copy

Learn more information about AUR packages installation on Arch Linux, please refer to Two Ways to Install Packages from AUR on Arch Linux/Manjaro published on NoCache.

More Guides

How to Install/Update/Remove openelec-dvb-firmware on Arch-Based Linux (Manjaro, ArcoLinux)

openelec-dvb-firmware is «DVB firmware from OpenELEC project» according to its description. To install or remove this package (openelec-dvb-firmware) from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, RebornOS and Garuda is pretty easy. This guide will be covering how to install, update and uninstall the package with either the built-in package manager pacman or an AUR helper like yay.

A Complete Tutorial on Installing libnids on Arch Linux (Manjaro/Anarchy)

«An implementation of an E-component of Network Intrusion Detection System.» is their gist of extra/libnids. To install this package (extra/libnids) from Arch official repository (Extra) on Arch Linux, Manjaro, EndeavourOS, Anarchy, Garuda, RebornOS and Artix is rather uncomplicated. This guide will show you step-by-step how to install, update and remove the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

threadweaver Install (Update, Uninstall) Tutorial on Arch Linux, Manjaro and EndeavourOS

«High-level multithreading framework» is the developer’s gist of extra/threadweaver. To install or remove this package (extra/threadweaver) from Arch official repository (Extra) on Arch Linux, Manjaro, EndeavourOS and Artix is quite simple. This tutorial will taught you how to install/update/remove the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

A Straightforward Tutorial on firefox-i18n-my Installation on Arch Linux (Manjaro/ArcoLinux)

«Burmese language pack for Firefox» is their definition of extra/firefox-i18n-my. To install and update extra/firefox-i18n-my from Arch official repository (Extra) on Arch Linux and Arch-based distros (e.g. Manjaro, EndeavourOS, ArcoLinux, Artix) is pretty easy. This guide will be covering how to install, update and uninstall the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

A Straightforward Guide on Installing sfzlint on Arch Linux (Manjaro, BlackArch)

«A linter and parser for SFZ files» is the developer’s description of sfzlint. To get this package (sfzlint) from AUR (Arch User Repository) on Arch Linux and Arch-based distros (e.g. Manjaro, EndeavourOS, Parabola, RebornOS) is relatively uncomplicated. This guide will be covering how to install/update/remove the package with either the default package manager pacman or an AUR helper (e.g. yay).

How to Install (Update/Remove) rhack on Arch Linux/Manjaro/RebornOS

According to rhack’s own gist, it’s «rhack — easily hack on your Rust dependencies». To install rhack from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, Garuda, ArcoLinux and Artix is pretty uncomplicated. This tutorial will show you step-by-step how to install/update/uninstall the package with either the default package manager pacman or an AUR helper (e.g. yay).

More guides… copyright 2023 ArchPKGs. All Rights Reserved.

Источник

ArchPKGs

Full Tutorial on clion-eap Installation on Arch Linux, Manjaro and Parabola

«C/C++ IDE. 30-day evaluation.» is the developer’s profile of clion-eap . To install or uninstall this package ( clion-eap ) from AUR (Arch User Repository) on Arch Linux and Arch-based Linux distros (e.g. Manjaro, EndeavourOS, BlackArch, Anarchy, Garuda) is quite uncomplicated. This tutorial will show you step-by-step how to install/update/uninstall the package with either the built-in package manager pacman or an AUR helper like yay .

Table of Contents

Install link

There are two well known methods to install clion-eap from AUR. pacman is the way to go if you are a seasoned Linux user and have the knowledge of how packages are built. If not, yay is a convenient alternative to install packages without the trouble to review PKGBUILD and build packages with makepkg by yourself.

Install with Pacman (Package Manager) link

sudo pacman -S --needed git && git clone https://aur.archlinux.org/clion-eap.git && cd clion-eap && makepkg -sicontent_copy

1. Install git if it is not on your system.
2. clone the package’s git repository from AUR.
3. cd into the directory of the repository.
4. Use makepkg to build the package, then install it with pacman .

Install with Yay (AUR Helper) link

yay -S clion-eapcontent_copy

Update link

Just like installing AUR packages, updating them is practically the same. Simply pull it from source then re-build it. However, it is still a good practice to upgrade your whole system first with sudo pacman -Syu before updating any packages to avoid breaking your system, since Arch is a rolling-release Linux distro.

Update with Pacman (Package Manager) link

Before running the command, check if you’re in the directory of the repository you previously cloned:

git pull && makepkg -sicontent_copy

1. pull from the package’s git repository.
2. Build the package with makepkg . Also, it will automatically be updated with pacman if built successfully.

Update with Yay (AUR Helper) link

Remove link

Compared to installing and updating packages, uninstalling is the simplest of these three,all you need to do is choose whether to keep the unused dependencies and the configuration files used by the package.

Uninstall with Pacman (Package Manager) link

sudo pacman -R clion-eapcontent_copy

sudo pacman -Rs clion-eapcontent_copy

sudo pacman -Rns clion-eapcontent_copy

Uninstall with Yay (AUR Helper) link

yay -R clion-eapcontent_copy

yay -Rs clion-eapcontent_copy

yay -Rns clion-eapcontent_copy

For more information about how to install AUR packages or how to install yay , please refer to this post.

More Guides

A Step-by-Step Guide on cntb-bin Installation on Arch Linux/Manjaro/Anarchy

«Command-line interface (CLI) for managing products from Contabo like VPS and VDS» is the developer’s profile of cntb-bin. To get cntb-bin from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, BlackArch, Parabola, Anarchy and RebornOS is fairly easy. This tutorial will be covering how to install, update and remove the package with either the default package manager pacman or an AUR helper like yay.

The Simplest Guide on c3c-git Installation on Arch-Based Linux (Manjaro/Garuda)

c3c-git is «C3 is an evolution of C enabling the same paradigms and retaining the same syntax as far as possible.» according to its profile. To install c3c-git from AUR (Arch User Repository) on Arch Linux and Arch-based distros (e.g. Manjaro, EndeavourOS, Anarchy) is rather easy. This tutorial will show you step-by-step how to install, update and uninstall the package with either the default package manager pacman or an AUR helper (e.g. yay).

The Simplest Guide on Installing netscripts-atzlinux-git on Arch Linux/Manjaro/Parabola

Quoting from netscripts-atzlinux-git’s own outline, it is «some simple network scripts no need any parameter». To get this package (netscripts-atzlinux-git) from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, Artix, RebornOS and Parabola is relatively simple. This guide will be covering how to install/update/uninstall the package with either the default package manager pacman or an AUR helper (e.g. yay).

The Simplest Guide on xsettingsd Installation on Arch Linux, Manjaro and Artix

«Provides settings to X11 applications via the XSETTINGS specification» is the maintainer’s description of extra/xsettingsd. To install or remove extra/xsettingsd from Arch official repository (Extra) on Arch Linux, Manjaro, EndeavourOS, RebornOS, Artix, Anarchy and BlackArch is quite straightforward. This tutorial will show you step-by-step how to install/update/uninstall the package with either the default package manager pacman or an AUR helper (e.g. yay).

python-wifiwrapper Install (Update, Remove) Guide on Arch Linux, Manjaro and BlackArch

«Command line tool and library wrappers around iwlist and /etc/network/interfaces» is the developer’s gist of python-wifiwrapper. To install or remove python-wifiwrapper from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, RebornOS and ArcoLinux is pretty uncomplicated. This guide will be covering how to install, update and uninstall the package with either the default package manager pacman or an AUR helper like yay.

Installing editorconfiger in One Line of Command on Arch Linux, Manjaro and ArcoLinux

editorconfiger is «Plain tool to validate and compare .editorconfig files» referring to its own definition. To install or uninstall this package (editorconfiger) from AUR (Arch User Repository) on Arch Linux and Arch-based distros (e.g. Manjaro, EndeavourOS, Garuda, ArcoLinux) is relatively simple. This guide will cover how to install/update/uninstall the package with either the built-in package manager pacman or an AUR helper like yay.

More guides… copyright 2023 ArchPKGs. All Rights Reserved.

Источник