Linux Mint Forums
Forum rules
There are no such things as «stupid» questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read how to get help. Topics in this forum are automatically closed 6 months after creation.
Eric23 Level 2
Posts: 86 Joined: Sun Oct 11, 2020 11:45 am Location: UK
intel rapid storage technology
Post by Eric23 » Fri Nov 06, 2020 9:36 am
Let the mega noob dumbness commence.
Before switching to Mint20 I was running windows 7 and I had Intel rapid storage technology set up. (it came pre configured) I’m not too familiar with how it works, but basically I had a standard HDD with the OS on it and a small 64GB SSD. It was setup to use the SSD as a kind of cache to speed up the system. From what I understand, it would monitor for commonly used programs and files and cleverly put them on the SSD to boot responsiveness without the need for a huge SSD.
Anyway, when my HDD failed, I replaced the drive, I unplugged the SSD, and I installed Mint 20 onto the new HDD.
I now had a redundant 64GB SSD just sat there because I didn’t know if it would work as it did in windows.
I decided to plug it in today to see what would happen. I was expecting it the throw up some errors and refuse to boot, but everything seems too be working fine. I have no idea if its actually working as intended or if Linux is just ignoring the SSD drive.
I believe I remember seeing an option on boot to configure raid, but I can’t seem to remember what key it is to enter that menu. I haven’t changed any of the settings, so I assume its still set to use the SSD as it did in windows.
As the SSD still has all the windows 7 cache gubbins on it I don’t know what to do. Will the old stuff just get overwritten as I use Linux? Do I need to format it? Will this even work in Linux?
I opened the Disks utility in Linux and the SSD is showing, and its contents is showing as:
Intel Rapid Storage Technology enterprise RAID Member (version 1.3.00)
I know in windows I had a program installed called Intel Rapid Storage Technology. It had options in there to boost performance or increase redundancy, plus other stuff I know nothing about. I just had it set to boot performance. I obviously don’t have this software on Linux, so I guess this won’t even work unless this is done at a hardware level on the motherboard?
This is the intel site about rapid storage technology https://www.intel.com/content/www/us/en . ology.html
Will having this SSD plugged in do anything for performance in Linux?
Sorry for noobing up the place.
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: intel rapid storage technology
Post by Kadaitcha Man » Fri Nov 06, 2020 9:59 am
The only dumbness I see on these forums is when people who need assistance bite the hands that are trying to help them, so you can relax.
Let’s clear a few things up for you.
First, IRST is a Windows only technology or it’s built-in to some BIOSes, in either case, it’s not needed with Linux. I rather suspect it’s more of a gimmick but other people’s opinions may vary.
Second, to get into the BIOS, you’re obviously aware there is a key, it will be documented in your machine’s manual. The key varies from manufacturer to manufacturer, it could be ESC , F1, F2, F6 F8, F10, F12 or DEL or some other key. I can’t tell you more because you don’t provide enough detail about your machine. It’s always a good idea to post the output of inxi -Fxz from a terminal and enclose it in code tags [code]output.here[/code] . You’ll see the code tags icon >when you reply.
Third, you need to get into the BIOS and set that 64GB device to AHCI mode or non-RAID. Once you do that, 64GB is more than enough to run the OS from, but I would recommend a separate home partition on the HDD.
Let me know if that doesn’t cover everything you asked about. I sort of go bling at the first sight of great walls of text
Eric23 Level 2
Posts: 86 Joined: Sun Oct 11, 2020 11:45 am Location: UK
Re: intel rapid storage technology
Post by Eric23 » Fri Nov 06, 2020 10:50 am
System: Kernel: 5.4.0-51-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: Cinnamon 4.6.7 Distro: Linux Mint 20 Ulyana base: Ubuntu 20.04 focal Machine: Type: Desktop Mobo: ASUSTeK model: P8Z68-V v: Rev 1.xx serial: UEFI: American Megatrends v: 0501 date: 05/09/2011 CPU: Topology: Quad Core model: Intel Core i7-2600K bits: 64 type: MT MCP arch: Sandy Bridge rev: 7 L2 cache: 8192 KiB flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 54577 Speed: 1605 MHz min/max: 1600/3800 MHz Core speeds (MHz): 1: 1605 2: 1605 3: 1605 4: 1605 5: 1605 6: 1605 7: 1605 8: 1605 Graphics: Device-1: NVIDIA GM204 [GeForce GTX 970] vendor: Micro-Star MSI driver: nvidia v: 450.80.02 bus ID: 01:00.0 Device-2: NVIDIA GM204 [GeForce GTX 970] vendor: Micro-Star MSI driver: nvidia v: 450.80.02 bus ID: 02:00.0 Display: x11 server: X.Org 1.20.8 driver: nvidia resolution: 1920x1080~60Hz OpenGL: renderer: GeForce GTX 970/PCIe/SSE2 v: 4.6.0 NVIDIA 450.80.02 direct render: Yes Audio: Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus ID: 00:1b.0 Device-2: NVIDIA GM204 High Definition Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 01:00.1 Device-3: NVIDIA GM204 High Definition Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 02:00.1 Device-4: Blue Microphones Yeti Stereo Microphone type: USB driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-1.6:4 Device-5: Microsoft LifeCam Cinema type: USB driver: snd-usb-audio,uvcvideo bus ID: 2-1.3:5 Sound Server: ALSA v: k5.4.0-51-generic Network: Device-1: Intel 82579V Gigabit Network vendor: ASUSTeK P8P67 Deluxe driver: e1000e v: 3.2.6-k port: f040 bus ID: 00:19.0 IF: eno1 state: up speed: 100 Mbps duplex: full mac: Device-2: Microsoft Xbox 360 Wireless Adapter type: USB driver: xpad bus ID: 2-1.6:8 Device-3: Qualcomm Atheros AR3011 Bluetooth type: USB driver: btusb bus ID: 2-1.7:9 Drives: Local Storage: total: 754.54 GiB used: 115.25 GiB (15.3%) ID-1: /dev/sda vendor: Seagate model: ST3750630AS size: 698.64 GiB ID-2: /dev/sdb vendor: Kingston model: SV300S37A60G size: 55.90 GiB Partition: ID-1: / size: 686.18 GiB used: 115.24 GiB (16.8%) fs: ext4 dev: /dev/sda2 Sensors: System Temperatures: cpu: 31.0 C mobo: N/A gpu: nvidia temp: 32 C Fan Speeds (RPM): N/A gpu: nvidia fan: 35% Info: Processes: 257 Uptime: 1h 59m Memory: 15.61 GiB used: 1.43 GiB (9.1%) Init: systemd runlevel: 5 Compilers: gcc: 9.3.0 Shell: bash v: 5.0.17 inxi: 3.0.38
I can get into the BIOS, but I cant remember how to get into the raid configuration settings that are separate from the BIOS. I think the IRST stuff is part of the motherboard for some reason.
I have a feeling the key to access the raid options is now in use by Linux as what I thought was the key brings up Linux related options. I will have to try and find the manual that came with my motherboard, I haven’t seen it since moving house last year though
I don’t know much about raid. Am I right in thinking raid 0 is what you would use for the fastest performance?
I don’t really want to install Linux on the 64GB SSD as its just too small. plus its got to be 7+ years old now.
I would rather have the OS on the new HDD. Its a shame that using the SSD as system cache won’t work. It made quite a difference on windows. The SSD failed 18 months after I got the pc and I sent it back under warranty. While I was waiting for the replacement I noticed the system was quite sluggish without the SSD. When I got the replacement put back in, after a few hours the load times on programs was super snappy again. IRST seemed to make a nice difference to performance on windows at least.
I will go and look for the manual and try and access the raid settings to see what I can do from there. I have never changed any of the raid options, so I assume its still setup as it should be for the SSD cache.
Intel RST и установка linux
Всем привет! Сразу прошу прощения, что создаю очередную тему с вопросом, который уже обсуждался, но решения, подходящего мне, я не нашел. У меня 2 nvme ssd диска собраны в raid1 на контроллере intel RST, в биосе соответственно стоит режим RST, ACHI поставить нет возможности. И я пробовал поставить разные дистры и не один linux дистр диски и разделы на них не видит, а вот freeBSD увидела и диски и раздел и без проблем встала, но я хочу именно linux систему. И ситуация с BSD вселяет надежду, что можно сделать это и с linux ядром, может кто-то подскажет или направит где почитать?
Linux ставлю рядом с виндой, пока только изучаю систему и полностью отказываться от виндоус не готов, поэтому пересобрать рейд в mdadm не вариант.
Это тебе знак свыше. Не юзай Linux, FeeeBSD — все что тебе нужно 😀
Разбери этот «массив», жизнь сразу станет проще. Если не хочешь, то читай документацию mdadm, там есть поддержка этого говна.
ситуация с BSD вселяет надежду, что можно сделать это и с linux
Странное творится в твоей голове.
Расскажи, как ты пришёл к такому неестественному выводу?
Вывод вполне естественный, если вспомнить, откуда приходит во FreeBSD поддержка многих устройств.
В основном видеокарт, всяких вайфаев и прочего ненужного десктопного. А raid это как раз серверное, линуксу не нужно.