Изменить имя файла linux

Rename a file or folder

As with other file managers, you can use Files to change the name of a file or folder.

To rename a file or folder:

1. Right-click on the item and select Rename , or select the file and press F2 .
2. Type the new name and press Enter or click Rename .

You can also rename a file from the properties window.

When you rename a file, only the first part of the name of the file is selected, not the file extension (the part after the last . ). The extension normally denotes what type of file it is (for example, file.pdf is a PDF document), and you usually do not want to change that. If you need to change the extension as well, select the entire file name and change it.

If you renamed the wrong file, or named your file improperly, you can undo the rename. To revert the action, immediately click the menu button in the toolbar and select Undo Rename , or press Ctrl + Z , to restore the former name.

Valid characters for file names

You can use any character except the / (slash) character in file names. Some devices, however, use a file system that has more restrictions on file names. Therefore, it is a best practice to avoid the following characters in your file names: | , \ , ? , * , < , " , : , >, / .

If you name a file with a . as the first character, the file will be hidden when you attempt to view it in the file manager.

Common problems

You cannot have two files or folders with the same name in the same folder. If you try to rename a file to a name that already exists in the folder you are working in, the file manager will not allow it.

File and folder names are case sensitive, so the file name File.txt is not the same as FILE.txt . Using different file names like this is allowed, though it is not recommended.

The file name is too long

On some file systems, file names can have no more than 255 characters in their names. This 255 character limit includes both the file name and the path to the file (for example, /home/wanda/Documents/work/business-proposals/… ), so you should avoid long file and folder names where possible.

The option to rename is grayed out

If Rename is grayed out, you do not have permission to rename the file. You should use caution with renaming such files, as renaming some protected files may cause your system to become unstable. See Set file permissions for more information.

More Information

You can choose the displayed language by adding a language suffix to the web address so it ends with e.g. .html.en or .html.de.
If the web address has no language suffix, the preferred language specified in your web browser’s settings is used. For your convenience:
[ Change to English Language | Change to Browser’s Preferred Language ]

The material in this document is available under a free license, see Legal for details.
For information on contributing see the Ubuntu Documentation Team wiki page. To report errors in this documentation, file a bug.

Источник

How Do I Rename a File in the Ubuntu Terminal?

Renaming an existing file is a basic operation that usually does not require a specialized tool in any operating system. Renaming a single file in Linux is quite a simple task but renaming more than one or multiple files via terminal is a more challenging job for new Linux users. In all Linux distributions, the terminal is an essential command-line application for administering the Linux systems.

However, to use effectively this CLI application, you should have strong knowledge about basic Linux commands and fundamentals such as create, delete and renaming an existing file. Different commands are available in the Ubuntu Linux system to rename a file that we will explore in this article.

We will provide comprehensive details in this tutorial on how you can rename a file in Ubuntu using the command-line application Terminal. All commands have implemented for the demonstration on the Ubuntu 20.04 Linux system.

Renaming Files in Ubuntu 20.04 LTS System Using Terminal

The two different commands ‘mv’ and ‘rename’ are available in the Ubuntu Linux system to rename a file via terminal or command-line approach. Let us discuss each command in detail.

Rename File in Ubuntu Using the mv Command

Before using the ‘mv’ command, you should know how it works on your system. The basic syntax of the ‘mv’ command is given below:

The most popular ‘mv’ command options are provided below:
-f – Displays no message or alerts before overwriting a file name.
-i – Displays prompt confirmation or warning messages before renaming a file.
-u – It moves a file if the file does not exist on the specified destination or in case of a new file.

The file source can be the destination of one or more files. The destination only represents a single file.

Example

For example, to rename the file ‘testfile1.txt’ to ‘testfile2.txt, you need to run the following command:

How to Use the mv Command to Rename Multiple Files?

Usually, you can only rename a single file using the move command. To rename multiple files using the mv command, you can use the mv command to combine with different commands. Let us say, mv command can be used along with for loop, while loop, and find command.

Let us explain with the help of an example. Here, we want to rename all .txt extension files of the current directory replaced with another .html extension. In this case, the following code will help us:

The above code will iterate using for loop through the files list having the .txt extension. After that, in the second line, it will replace each file extension .txt with .html. In the end, ‘done’ indicated the end of the for loop segment.

How to Use the Rename Command to Rename Files in Ubuntu?

Using the rename command, you can rename multiple files of a current directly at once. This command contains more advance features as compared to the ‘mv’ command. For renaming files using the rename command, you should have basic knowledge about regular expressions usage.

In most Linux distributions, the ‘rename’ command is installed by default. However, if you have not installed the rename command on your Ubuntu system then, it can be easily installed on Ubuntu and its derivatives by running the following command:

Syntax of Rename Command

Using the following syntax, you can use the rename command:

The rename command will rename files according to the specific regular Perl expressions.

Example

In the following example, we want to change the extension of all text files. So, we will change or replace all files with extension .txt to .html by executing the following command:

When you use the rename command followed by option ‘-n’, it also displays the file names to be renamed and renaming them as follows:

The above command displays the following result on the terminal window:

By default, the rename command does not overwrite an existing file. However, if you pass option -f along with the rename command then, it will help you to overwrite the existing files. Execute the following command to use the rename command followed by the -f option:

To change or rename the file name using rename command use the following command:

Example

For example, we want to rename a single file with the name ‘testfile.txt’ to newtestfile.txt. In this case, the above command will be modified into the following form:

To see more usage of rename command, let us try the following examples:

For example, to rename all those files, which contain spaces in file name and you want to replace it with underscores. In this case, the rename command will help you in the following way:

Using rename command, you can convert the file name in all lowercase letters as follows:

Similarly, to convert the file name to all uppercase letters, use the following command:

To explore more options and uses of rename command, type the following terminal command:

Conclusion

We discussed in this article how to rename files in Ubuntu 20.04 LTS distribution using the terminal application. Moreover, we explored the working and uses of the ‘mv’ and ‘rename’ commands for renaming a file. From the above discussion, we concluded mv command is useful for renaming a file but, rename command offers more advanced options for file renaming in the Ubuntu system.

About the author

Samreena Aslam

Samreena Aslam holds a master’s degree in Software Engineering. Currently, she’s working as a Freelancer & Technical writer. She’s a Linux enthusiast and has written various articles on Computer programming, different Linux flavors including Ubuntu, Debian, CentOS, and Mint.

Источник

Rename a File in Linux – Bash Terminal Command

Zaira Hira

Renaming files is a very common operation whether you are using the command line or the GUI.

Compared to the GUI (or Graphical User Interface), the CLI is especially powerful. This is in part because you can rename files in bulk or even schedule the scripts to rename files at a certain point in time.

In this tutorial, you will see how you can rename files in the Linux command line using the built-in mv command.

How to Use the Linux mv Command

You can use the built-in Linux command mv to rename files.

The mv command follows this syntax:

mv [options] source_file destination_file

Here are some of the options that can come in handy with the mv command:

• -v , —verbose : Explains what is being done.
• -i , —interactive : Prompts before renaming the file.

Let’s say you want to rename index.html to web_page.html . You use the mv command as follows:

zaira@Zaira:~/rename-files$ mv index.html web_page.html 

Let’s list the files and see if the file has been renamed:

zaira@Zaira:~/rename-files$ ls web_page.html

How to Name Files in Bulk Using mv

Let’s discuss a script where you can rename files in a bulk using a loop and the mv command.

Here we have a list of files with the extension .js .

zaira@Zaira:~/rename-files$ ls -lrt total 0 -rw-r--r-- 1 zaira zaira 0 Sep 30 00:24 index.js -rw-r--r-- 1 zaira zaira 0 Sep 30 00:24 config.js -rw-r--r-- 1 zaira zaira 0 Sep 30 00:24 blog.js

Next, you want to convert them to .html .

You can use the command below to rename all the files in the folder:

for f in *.js; do mv -- "$f" "$.html"; done

Let’s break down this long string to see what’s happening under the hood:

• The first part [ for f in *.js ] tells the for loop to process each “.js” file in the directory.
• The next part [ do mv — «$f» «$.html ] specifies what the processing will do. It is using mv to rename each file. The new file is going to be named with the original file’s name excluding the .js part. A new extension of .html will be appended instead.
• The last part [ done ] simply ends the loop once all the files have been processed.

zaira@Zaira:~/rename-files$ ls -lrt total 0 -rw-r--r-- 1 zaira zaira 0 Sep 30 00:24 index.html -rw-r--r-- 1 zaira zaira 0 Sep 30 00:24 config.html -rw-r--r-- 1 zaira zaira 0 Sep 30 00:24 blog.html

Conclusion

As you can see, renaming files is quite easy using the CLI. It can be really powerful when deployed in a script.

What’s your favorite thing you learned here? Let me know on Twitter!

You can read my other posts here.

Источник