Как установить anylogic на linux

ArchPKGs

Installing anylogic-ple-8.2.4 (Complete Guide) on Arch Linux (Manjaro, ArcoLinux)

«AnyLogic Personal Learning Edition — for beginners and students. Last x86 version» is the maintainer’s outline of anylogic-ple-8.2.4 . To install or remove anylogic-ple-8.2.4 from AUR (Arch User Repository) on Arch Linux and Arch-based distributions (e.g. Manjaro, EndeavourOS, ArcoLinux, Artix) is pretty easy. This guide will be covering how to install, update and remove the package with either the default package manager pacman or an AUR helper (e.g. yay ).

Table of Contents

Installation link

Two typical ways are used to install anylogic-ple-8.2.4 from AUR. pacman is what you are looking for if you are an expert of Arch-based distros and understand the concept of how packages are built. If not, yay is a common alternative to install packages without the trouble to review PKGBUILD and build packages with makepkg yourself.

Using Pacman link

sudo pacman -S --needed git && git clone https://aur.archlinux.org/anylogic-ple-8.2.4.git && cd anylogic-ple-8.2.4 && makepkg -sicontent_copy

1. Install git if it is not already installed.
2. clone the package’s git repository from AUR.
3. cd into the folder of the repository.
4. Build the package with makepkg . Also, it will automatically be installed with pacman if built successfully.

Using Yay link

yay -S anylogic-ple-8.2.4content_copy

Updating link

Just like installing AUR packages, updating them is fairly the same. All you have to do is pull it from source then re-build it. Nevertheless, it is still recommended to upgrade your whole system first with sudo pacman -Syu before updating any packages to avoid dependency issues, since Arch is a rolling-release Linux distribution.

Using Pacman link

git pull && makepkg -sicontent_copy

1. pull from the package’s git repository.
2. Build the package with makepkg , then update it with pacman .

Using Yay link

Uninstallation link

Compared to installing and updating packages, removing is the easiest of these three,just choose whether to remove the unused dependencies and the configuration files used by the package.

Using Pacman link

sudo pacman -R anylogic-ple-8.2.4content_copy

sudo pacman -Rs anylogic-ple-8.2.4content_copy

sudo pacman -Rns anylogic-ple-8.2.4content_copy

Using Yay link

yay -R anylogic-ple-8.2.4content_copy

yay -Rs anylogic-ple-8.2.4content_copy

yay -Rns anylogic-ple-8.2.4content_copy

For more information about how to install and update AUR packages or how to install yay , please refer to this post.

More Guides

How to Install playerctl-git (Complete Tutorial) on Arch-Based Linux (Manjaro, Anarchy)

«mpris media player controller and lib for spotify, vlc, audacious, bmp, xmms2, and others.» is the maintainer’s gist of playerctl-git. To install and update playerctl-git from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, Anarchy, BlackArch, Artix and Parabola is quite straightforward. This tutorial will cover how to install/update/uninstall the package with either the default package manager pacman or an AUR helper (e.g. yay).

Full Guide on Installing clipf on Arch Linux/Manjaro/Garuda

«clipf is a personal finance manager with command line interface» is the developer’s definition of clipf. To install this package (clipf) from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS and Anarchy is comparatively simple. This tutorial will taught you how to install/update/remove the package with either the built-in package manager pacman or an AUR helper like yay.

How to Install (Update/Remove) libmemcached-old on Arch-Based Linux (Manjaro, ArcoLinux)

According to libmemcached-old’s definition, it’s «C and C++ client library to the memcached server, old version». To install and update this package (libmemcached-old) from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, RebornOS and ArcoLinux is quite easy. This tutorial will taught you how to install/update/remove the package with either the built-in package manager pacman or an AUR helper like yay.

A Step-by-Step Guide on php82-apache Installation on Arch Linux/Manjaro/Garuda

php82-apache is «Apache SAPI for php82» based on its own profile. To install php82-apache from AUR (Arch User Repository) on Arch Linux and Arch-based Linux distributions (e.g. Manjaro, EndeavourOS, Artix) is quite straightforward. This tutorial will taught you how to install/update/uninstall the package with either the default package manager pacman or an AUR helper (e.g. yay).

Guide on Install/Update/Uninstall r-mess on Arch-Based Linux (Manjaro/BlackArch)

Referring to r-mess’s description, it is «Miscellaneous Esoteric Statistical Scripts». To install and update r-mess from AUR (Arch User Repository) on Arch Linux and Arch-based distros (e.g. Manjaro, EndeavourOS, Parabola, ArcoLinux) is comparatively uncomplicated. This tutorial will cover how to install, update and uninstall the package with either the built-in package manager pacman or an AUR helper like yay.

waybar-hyprland-cava-git Install (Update, Uninstall) Tutorial on Arch Linux/Manjaro/Artix

«Highly customizable Wayland bar for Sway and Wlroots based compositors, with workspaces support for Hyprland, and cava (Cross-platform Audio Visualizer) support enabled. (git version)» is their gist of waybar-hyprland-cava-git. To install and update waybar-hyprland-cava-git from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, Garuda, Anarchy, RebornOS and ArcoLinux is comparatively simple. This tutorial will show you step-by-step how to install/update/uninstall the package with either the built-in package manager pacman or an AUR helper like yay.

More guides… copyright 2023 ArchPKGs. All Rights Reserved.

Источник

Русские Блоги

Официальный веб-сайт

Установить

Добавить разрешения на выполнение файлов

sudo chmod u+x anylogic-professional-8.7.3.linux.x86_64.tgz.bin 

Переместите файл в каталог /OPT (какой каталог вы хотите установить, в какой каталог вы хотите установить)

sudo mv anylogic-professional-8.7.3.linux.x86_64.tgz.bin /opt 

Команда SU Введите пользователь root
Запустите установку файла

su ./anylogic-professional-8.7.3.linux.x86_64.tgz.bin 

После того, как все время удерживая клавишу Enter

Введите да

Введите выход команды, чтобы выйти из пользователя root

Откройте сгенерированную папку AnyLogic

Запустите этот файл, чтобы запустить AnyLogic

Введите код активации



AnyLogic.desktop

[Desktop Entry] Version=1.0 Encoding=UTF-8 Name=AnyLogic Type=Application Terminal=false Exec=/bin/sh /opt/anylogic/start-anylogic.sh Icon=/opt/anylogic/icon.xpm 

Так злой, вы не получите значок сочетания ссылок
Чтобы открыть программное обеспечение, вам необходимо ввести файловый каталог для запуска файла .sh

Источник

Installing Private Cloud

Before installing AnyLogic Private Cloud, consider checking the system requirements.

If you have already purchased the Private Cloud key and don’t plan to take advantage of the evaluation period, set up and configure Team License Server.

Your primary server (the one you plan to serve Private Cloud) must have a static IP address. If you want your instance to have a dynamic IP address, configure a DNS server for domain name resolving accordingly.

Downloading the Private Cloud installation package

1. Create a directory to which you will download Private Cloud, or choose an existing one:
   • mkdir directory — to create a directory
   • cd directory — to navigate to an existing directory
2. Download Private Cloud:
   • To download the latest version of Private Cloud Lite, execute the following command:
     sudo wget https://cloud.anylogic.com/files/anylogic-private-cloud-lite.tar.gz
   • To download the latest version of Private Cloud Pro, execute the following command:
     sudo wget https://cloud.anylogic.com/files/anylogic-private-cloud-pro.tar.gz
   • To download a specific version or an individual shipment of Private Cloud Enterprise, use the link provided by the AnyLogic support team.

Installing Private Cloud

Lite: tar -xf anylogic-private-cloud-lite.tar.gz
Pro: tar -xf anylogic-private-cloud-pro.tar.gz
Enterprise: tar -xf anylogic-private-cloud-enterprise.tar.gz

The installation script of Private Cloud supports a selection of options. For more information, see Installer reference.

During the installation, you will need to specify the Private Cloud external address.
Enter Cloud external address :
Type in a valid hostname or IP address, and press Enter .

The hostname or IP address you use should be the same address the end users will use to connect.
You should not use loopback addresses like localhost or 127.0.0.1 .

Next, you will be asked whether you would like to specify the Team License Server address during installation. You need properly configured Team License Server to continue using AnyLogic Cloud after the evaluation period.
Enter Y to configure license server address [y/n]:

If you have chosen to specify the Team License Server address, type in the valid Team License Server address and press Enter .
Enter License Server address :
Next, you will need to specify whether you plan to enable HTTPS support in Cloud.
Enter Y to enable HTTPS support [y/n]:
To proceed with HTTPS configuration, you need a valid SSL key and certificate pair. If you are not sure whether you have them, contact your system administrator for assistance, or enter n to use the HTTP protocol.

It is impossible to properly host a Private Cloud instance with a self-signed SSL certificate — the desktop installation of AnyLogic won’t be able to upload models to it. You can, however, complete the installation process to ensure the Private Cloud instance works properly in your network. Nonetheless, it is strongly recommended to avoid enabling HTTPS support in case you do not have the certificate signed by a trusted provider.

Specify the full path to your SSL key.
Enter HTTPS key file path :
Specify the full path to your SSL certificate.
Enter HTTPS certificate file path :
To simplify the installation process, provide the installer script with appropriate flags manually. To view the full list of supported flags, execute the following command:

Make sure to change the default password of the administrator account. To do that, log in as the administrator, click admin in the top right corner of the screen, then select Profile. After that, modify the password using the Change Password form.
It is also recommended to change the default user name of the administrator account to a valid email. You can do that on the administrator panel.

To learn how to configure AnyLogic desktop installations to connect to your freshly installed Private Cloud instance, see Exporting a model to AnyLogic Cloud.

Setting up additional nodes for Private Cloud Enterprise

1. Upon completing the installation, you will need to prepare your secondary nodes — additional machines that your Private Cloud Enterprise instance will use to run models. The following steps must be performed on each secondary node.
2. Create an administrator user account (we recommend to use alcadm ) and add it to the Docker group:

sudo useradd -m alcadm
sudo passwd alcadm # Input a new password for the alcadm user here — you will need it later
sudo usermod -a -G docker alcadm

If you have problems while exiting visudo , try executing the :wq command to save and exit, or execute :q! to exit without saving.

An example of such file is as follows:

< "host" : "10.0.0.1", "sshAccess" : < "method" : "PRIVATE_KEY", "user" : "alcadm", "key" : "id_rsa" >, "volumeRoot" : "/home/alcadm/alc/cache", "labels" : [ "executor" ], "stoppable" : false, "manageable" : true >