- How to Install Free FortiClient VPN Client on Ubuntu 22.04 LTS
- How to install Forticlient VPN on Ubuntu 22.04 LTS Jammy Jellyfish | vetechno
- Also Read:
- FortiClient VPN Supported Features
- Prerequisites
- Install Forticlient VPN on Ubuntu 22.04 LTS Jammy Jellyfish
- Installing FortiClient VPN via Terminal on Ubuntu 22.04 LTS
- Fortinet Community
- Technical Tip: How to install FortiClient on Ubuntu 22.04 LTS
- How to Install FortiClient VPN on Ubuntu 20.04 LTS
- Installation Guide:
- Step 1: Install gpg key
- Step 2: Edit sources.list file
- Step 3: Update your system
- Step 4: Install Forticlient VPN
- Step 5: Verify Installation
- How to uninstall FortiClient VPN from Ubuntu 20.04?
How to Install Free FortiClient VPN Client on Ubuntu 22.04 LTS
FortiClient is a security solution designed to reduce your computer’s vulnerability. The manufacturer advertises that the tool comes with virus protection, two-factor authentication, and WAN optimization, among other things.
However, the FortiClient user interface itself only contains the vulnerability scan and a tab in which you can set up a VPN connection for remote access.
The vulnerability scan indicates when, for example, an application is outdated, so there is potential for an attack and an update is urgently needed.
The abbreviation VPN stands for “Virtual Private Network”, a self-contained network that you can access from anywhere with the right access data. For example, do you log into the company network from your home office to use printers, hard drives, and your work e-mail inbox, or do you dial into your home network while on the go and conveniently control your smart home from afar? Universities also allow their students secure access to the university network via VPN.
FortiClientEdition
Zero Trust Security (ZTNA) – This allows remote workers to use ZTNA and VPN encrypted tunnels with URL filtering and USB device control. Central management via FortiClient EMS is included with the cloud editions.
Endpoint Protection (ZTNA and EPP/APT) – Expands functionality with AI-based Next-Generation Antivirus (NGAV), endpoint quarantine, and application firewall, as well as support for cloud sandbox.
Cloud-based Endpoint Security (ZTNA Agent, EPP/APT, and FortiSASE SIA): Extends functionality with Firewall-as-a-Service (FWaaS) capabilities of FortiSASE services, including SSL inspection, intrusion prevention (IPS), Web Filtering, Domain Name System (DNS) security, and data loss prevention (DLP). Only available as EMS Cloud edition.
FortiClient VPN Only
The VPN-only version of FortiClient offers SSL VPN and IPSec VPN but does not include any support. Here we are going to install this one…
How to install Forticlient VPN on Ubuntu 22.04 LTS Jammy Jellyfish | vetechno
In this blog post, we are going to install latest version of FortiClient VPN Client on Ubuntu 22.04 LTS. The Free FortiClient VPN Application allows you to create a secure Virtual Private Network (VPN) connection using SSL VPN “Tunnel Mode” or IPSec connections between your device or machine and FortiGate Firewall. Your connections are fully encrypted and all the traffic will be sent over the secure tunnel.
Also Read:
This FortiClient VPN client can be installed on Ubuntu Operating System as well using the DEB binary or directly from the Fortinet Ubuntu repos. It can be installed on all major Operating systems like Windows, macOS, and Linux/Ubuntu Operating systems.
To install FortiClient VPN Client on Ubuntu 20.04 LTS and Ubuntu 18.04 LTS or other Ubuntu releases using the DEB binary file, move to FortiClient downloads page and download the DEB binary installer file.
FortiClient VPN Supported Features
- IPSec and SSLVPN “Tunnel Mode”
- Two-factor Authentication using FortiToken
- Client Certificates
- English, Chinese, Japanese, and Korean Language Support
- The VPN-only version of FortiClient offers SSL VPN and IPSecVPN, but does not include any support.
Prerequisites
Install Forticlient VPN on Ubuntu 22.04 LTS Jammy Jellyfish
Let’s do download the .deb file from the fortinet official website.
Step 1. Click here to download .deb file
Step 2. Go to download folder and double click on forticlient_vpn file.
It will automatically install on your system.
[email protected]:~$ wget https://filestore.fortinet.com/forticlient/downloads/forticlient_vpn_7.0.0.0018_amd64.deb --2022-03-27 00:49:56-- https://filestore.fortinet.com/forticlient/downloads/forticlient_vpn_7.0.0.0018_amd64.deb Resolving filestore.fortinet.com (filestore.fortinet.com). 66.35.23.97 Connecting to filestore.fortinet.com (filestore.fortinet.com)|66.35.23.97|:443. connected. HTTP request sent, awaiting response. 200 OK Length: 72721126 (69M) [application/x-debian-package] Saving to: ‘forticlient_vpn_7.0.0.0018_amd64.deb’ forticlient_vpn_7.0.0.0018_amd64.deb 100%[=============================================================================>] 69.35M 3.79MB/s in 27s 2022-03-27 00:50:23 (2.59 MB/s) - ‘forticlient_vpn_7.0.0.0018_amd64.deb’ saved [72721126/72721126] [email protected]:~$ sudo dpkg -i forticlient_vpn_7.0.0.0018_amd64.deb [sudo] password for vikash: Selecting previously unselected package forticlient. (Reading database . 177121 files and directories currently installed.) Preparing to unpack forticlient_vpn_7.0.0.0018_amd64.deb . Unpacking forticlient (7.0.0.0018) . dpkg: dependency problems prevent configuration of forticlient: forticlient depends on libappindicator1 (>> 0); however: Package libappindicator1 is not installed. forticlient depends on libgconf-2-4 (>> 0); however: Package libgconf-2-4 is not installed. dpkg: error processing package forticlient (--install): dependency problems - leaving unconfigured Processing triggers for hicolor-icon-theme (0.17-2) . Processing triggers for mailcap (3.70+nmu1ubuntu1) . Processing triggers for gnome-menus (3.36.0-1ubuntu2) . Processing triggers for desktop-file-utils (0.26-1ubuntu2) . Errors were encountered while processing: forticlient [email protected]:~$ sudo apt install -f Reading package lists. Done Building dependency tree. Done Reading state information. Done Correcting dependencies. Done The following additional packages will be installed: gconf-service gconf-service-backend gconf2-common libappindicator1 libdbusmenu-gtk4 libgconf-2-4 Suggested packages: indicator-application The following NEW packages will be installed: gconf-service gconf-service-backend gconf2-common libappindicator1 libdbusmenu-gtk4 libgconf-2-4 0 upgraded, 6 newly installed, 0 to remove and 18 not upgraded. 1 not fully installed or removed. Need to get 915 kB of archives. After this operation, 8,314 kB of additional disk space will be used. Do you want to continue? [Y/n] Y Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 libdbusmenu-gtk4 amd64 16.04.1+18.10.20180917-0ubuntu7 [30.9 kB] . . . . . . . [email protected]:~$
Now launch Forticlient VPN
Installing FortiClient VPN via Terminal on Ubuntu 22.04 LTS
wget -O - https://repo.fortinet.com/repo/6.4/ubuntu/DEB-GPG-KEY | sudo apt-key add -
Fortinet Community
FortiClient proactively defends against advanced attacks. Its tight integration with the Security Fabric enables policy-based automation to contain threats and control outbreaks. FortiClient is compatible with Fabric-Ready partners to further strengthen enterprises’ security posture.
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
Created on 07-11-2022 01:24 AM Edited on 10-27-2022 01:17 AM By Jean-Philippe_P
Technical Tip: How to install FortiClient on Ubuntu 22.04 LTS
Description
This article describes how to install FortiClient on Ubuntu 22.04 LTS.
Upon installation, it is not possible to open FortiClient GUI upon installation on Ubuntu 22.04 LTS but it may work fine through the CLI.
Scope
Solution
1) Ensure FortiClient is downloaded through the Fortinet Support Portal, support.fortinet.com.
Once logged into support.fortinet.com, navigate here:
At the top of the webpage, select Support -> Firmware Download -> Select Product: FortiClient -> Download.
— From here, it is possible to navigate to the desired FortiClient version by selecting the folders; for example FortiClient 7.0.6 for Ubuntu.
— Select the Windows folder -> v7.00 -> 7.0 -> 7.0.6. Image File Path should look like this: / FortiClient/ Linux/ v7.00/ 7.0/ 7.0.6/.
— Select the filename forticlient_7.0.6.0214_amd64.deb or forticlient_vpn_7.0.6.0214_amd64.deb and select HTTPS at the right-side to start the download.
— x86 for 32-bit OS and amd64 for 64-bit OS.
2) Download the latest version available on the Fortinet Support Portal.
At this time of writing, the latest version available is 7.0.4 and 7.0.6.
The latest version on the Fortinet products download page is only 7.0.0.
3) Download the file with the .deb extension.
4) Open the Ubuntu terminal and ensure that it is in the path where the file is downloaded.
5) If there are any existing installations of FortiClient, uninstall it.
It can be uninstalled using this command:
# sudo apt-get remove forticlient
6) To install the newly downloaded FortiClient version:
7) To launch the newly installed FortiClient GUI, type this in the terminal and hit Enter:
How to Install FortiClient VPN on Ubuntu 20.04 LTS
FortiClient uses SSL and IPSec VPN to provide its customers with safe, efficient, reliable, and fast access to corporate networks and applications from virtually any internet-connected remote machine. FortiClient enhances remote user experience with built-in auto-connect and always-up VPN features.
In today’s guide, we will show you how to install FortiClient VPN on our machine. We have used Ubuntu 20.04 as our operating system on which we will install the VPN application. Ubuntu is a very popular, efficient, fast, and reliable distribution of Linux. This distro is based on Debian. Due to its focus on user-friendliness and stability, it is widely used by both beginners as well as experts.
Installation Guide:
Following are the steps involved in installing FortiClient VPN on our Ubuntu machine:
Step 1: Install gpg key
The very first thing that we will start with is installing the gpg key. To do that run the following command:
wget -O - https://repo.fortinet.com/repo/ubuntu/DEB-GPG-KEY | sudo apt-key add -
Step 2: Edit sources.list file
In this step, we will add a line in the sources.list file to enable installation of the application. To do that, first, go to apt directory following the command given below.
Next, open sources.list file with the editor you are comfortable with. We have used nano editor as it is the easiest to use. To open the file, run:
Once the file is open, copy this line and add it to the top of the file as shown below:
deb [arch=amd64] https://repo.fortinet.com/repo/ubuntu/ /bionic multiverse
Now save the file with (CTRL + T) and exit with (CTRL + O).
Step 3: Update your system
To update the recent changes we made in the file in the previous step, we will update our system. To do that run this command:
After entering the command, you will be prompted to give your sudo password. Once it is accepted, the system will begin to update like this:
Step 4: Install Forticlient VPN
Once the system is updated, we will install the VPN application using this command:
sudo apt install forticlient
Forticlient VPN will begin to install and this is what the terminal will look like:
Step 5: Verify Installation
Now that we have installed the application, let’s also verify if it is working properly or not. To do that go to the start menu and search for the application. FortiClient VPN will appear on the screen. Run it to see if it is working fine.
This is how the user interface for FortiClient will appear.
Next, go to remote access and click on configure.
Now here provide the configuration to connect through VPN.
How to uninstall FortiClient VPN from Ubuntu 20.04?
Now that we have understood how to install FortiClient VPN on our system, let’s also have a look at how to remove it from our machine. To do that we only need one simple command, and the application will be swiftly uninstalled from our Ubuntu machine. This is the command:
sudo apt-get remove forticlient
When the application begins to uninstall, this is what the terminal looks like:
Once the process is completed, to verify the uninstallation, you can go to the start screen to check if the application still exists on the system or not.
In this tutorial, we looked at how to install FortiClient VPN in detail with the help of a few easy-to-follow commands. We also explored the process required to uninstall the application. The installation process will not take more than 5 minutes. After installing it and connecting to it, you can securely communicate on your network.
To see how you can install Open VPN on Ubuntu 20.04, check this out:
Karim Buzdar holds a degree in telecommunication engineering and holds several sysadmin certifications including CCNA RS, SCP, and ACE. As an IT engineer and technical author, he writes for various websites.