Какие айфоны поддерживают 5 ггц wi fi

iPhone Wi-Fi specification details

The following are iPhone Wi-Fi specification details.

Roaming optimization support for iPhone

All iPhone X or later models

Wi-Fi specifications for iPhone models

  • 802.11 compatibility and frequency band: 802.11ax ( Wi-Fi 6), 802.11ac ( Wi-Fi 5), 802.11n ( Wi-Fi 4), 802.11a, 802.11b/g and 2.4 GHz or 5 GHz.
  • Physical layer (PHY) data rate: The highest rate at which a client can transmit data over Wi-Fi .
  • Channel bandwidth: The maximum channel bandwidth that is supported. Beginning with 802.11n, channels can be combined to create a wider channel that allows for more data to be transmitted during a single transmission. With 802.11n for 5 GHz band, two 20 MHz channels can be combined to create a 40 MHz channel. With 802.11ac for 5 GHz band, four 20 MHz channels can be combined to create an 80 MHz channel.
  • MCS index: The Modulation and Coding Scheme (MCS) index defines the maximum transmission rate at which 802.11ac/n devices can communicate. 802.11ac uses Very High Throughput (VHT) and 802.11n uses High Throughput (HT) frames.
  • Spatial streams/SISO/MIMO: Each radio can send a specific number of independent data streams, called spatial streams, at the same time, which can increase overall throughput. Single input single output (SISO) uses a single radio and antenna and multiple input multiple output (MIMO) uses multiple radios and antennas.

Wi-Fi specifications for iPhone 11 and later models

The table below details the Wi-Fi specifications for the iPhone 11 and later models listed in the above table.

802.11 standard, name, frequency

Maximum channel bandwidth

Источник

Can iPhone Connect to 5Ghz wifi?

Can iPhone Connect to 5Ghz wifi?

Internet technology has seen innovation and improvement by leaps and bounds in the past few decades. Initially, the internet was available with its modem-only technology; however, now it is known as a wireless technology offering not one but two frequency bands.

Most routers now function with two frequency bands, and hence you can operate your devices with both 2.4GHz and 5GHz wifi frequencies.

You might be looking for options to access high-speed internet with your iPhone, but can iPhone connect to 5GHz wi fi? And do you know how to connect it to 5GHz wi fi? Read the following post and find out answers to all these questions and much more.

What Are The Benefits of 5GHz Wi fi Frequency Band?

We all know that primarily routers work with the 2.4GHz frequency band. Gradually, customers noticed that this single router frequency band would become overcrowded with devices and started performing poorly. In an attempt to provide better services to customers, finally, the 5GHz band was added.

Since the 5GHz frequency band is comparatively new to the 2.4GHz band, it doesn’t get exhausted because few devices can access it. Another advantage of the 5GHz band is that it is less vulnerable to interference and speed issues.

Читайте также:  Настроить вайфай на ноут

Similarly, the 5GHz frequency band has the edge over the 2.4GHz frequency band because it has more channels in 25 non-overlapping channels. Luckily, you will get much better speed with the 5GHz wi fi band because it transmits data quickly.

The downside of the 5GHz wi fi band is that, unfortunately, it has a shorter range. Moreover, this band’s higher frequency makes it difficult to penetrate and reach beyond solid objects like floors and walls.

Can My Apple Device Connect To 5GHz?

The older Apple iPhone models like iPhone 3/3GS and iPhone 4/4s are not compatible with the 5GHz wifi frequency band. However, iPhone 5 and all-new models, including iPhone 6/6 Plus/ 6S/ 6S Plus/ SE/7/7 Plus/ 8/8 Plus/ and iPhone X/XI/XII, are designed to work with the 5GHz wi fi band.

According to professionals, the 5GHz support on iPhone will prove to be a great feature as it improves and fastens the aggregate capacity in different environments. Aggregate capacity can be defined as the overall capacity provided to all simultaneous users across the APs in a specific area.

William Kish, CTO and Co-founder of Ruckus Wireless, explains this feature of 5GHz for iPhone saying, “The higher aggregate capacity is mostly a function of the much larger amount of bandwidth available in the 5GHz band as well as the more capacity-favorable propagation characteristics of the 5GHz spectrum,”.

The 5 GHz frequency band with its 23 20MHz-wide, non-over-lapping channels will fasten the data transfer speed for iPhone. Despite all of its qualities, the 5GHz band might create iPhone problems because of its shorter wavelength.

How To Connect iPhone To 5GHz?

To connect your iPhone to 5GHz wi fi band, you will have to change your router’s settings.

However, before proceeding to change the settings of your router, you should make sure to:

  • Check if the router supports the 5GHz wifi frequency band.
  • Create a backup of your router’s settings so you can quickly restore the settings if needed.
  • Update the software system on your devices. This will help add the latest security updates to your devices to connect and work smoothly with each other.
  • Forget and remove the wi fi network from all devices which had previously joined it. By doing this, your devices will operate with the new settings once they rejoin the network.

Following are the settings which you must add to your router so that your iPhone can connect with 5GHz:

Unique Network Name

Assign a single, unique name or SSID(Service Set Identifier) to your wi fi network. Do not make the mistake of giving your network common or default names. More importantly, do not set different terms for the 2.4GHz and 5GHz frequency bands of your router.

If you give different names to the dual-frequency bands, your device will fail to connect with it.

Channel Width

Channel width can be described as the capability of a ‘pipe’ for transferring data. Wider wi fi channels are more prone to be affected with interference and easily interfere with other devices.

Читайте также:  Приставка двб т2 вай фай

To set a 5GHz frequency band on your router, you should select the auto or all widths(20MHz, 40MHz, 80 MHz) for it. This feature will guarantee that your router provides the best performance to all connected devices.

Similarly, you should enable automatic firmware updates for your router. It would help if you also turned on every radio mode for your router. This feature will ensure that your devices connect to the internet using the most efficient radio support.

Once you have made these changes to your router settings, you should continue and change its default 2.4GHz wi fi band to 5GHz band through these steps:

  • Open up a web browser and enter the router’s default IP address. The default IP address is written beneath your router, or you can locate it in the router’s user manual.
  • Enter the login details of your account, including the username and password.
  • Click on the wireless tab so that you can change the wireless settings. In the wireless setting window, select the primary option.
  • Change the 802.11 bands from 2.4GHz to 5GHz wi fi band.
  • Press the apply button.

After you have set the wi fi connection to the 5GHz band, connect your iPhone to the new wi fi network, and it will start functioning with the 5GHz wi fi frequency band.

What To Do If My iPhone Can Not Connect to 5 GHz Wi fi Band?

Your iPhone may fail to connect with the 5 GHz wi fi band even though you have made changes to the router settings. Luckily, you can fix the connectivity issues with the help of the following solutions:

Restart Your iPhone

If your iPhone is giving you a hard time connecting to the 5GHz wi fi band, you should restart it.

Use the following steps to restart iPhone X, 11, or 12:

  • Press the volume and side button till you see the power-off slider.
  • Swipe the slider and let your iPhone stay off for 30 seconds.
  • Afterward, press and hold the side button, and iPhone will restart.

You can restart iPhone SE(Second generation), 8, 7, or 6 with the following steps:

  • Press the side button until you see the ‘power off’ slider.
  • Swipe the slider to the left and let your iPhone stay off for 30 seconds.
  • Press the side button and wait for the iPhone to restart.

Once you have restarted your iPhone, reconnect and recheck if your device can connect to the 5GHz wifi network.

Reset Network Settings

If the above method doesn’t work out, then you can try out resetting the network settings on your iPhone with these steps:

  • Open iPhone’s main menu and go to the settings tab.
  • Select the general settings field and tap on the reset button.
  • Click on the reset network settings button and wait for the reset procedure to start.
  • Once the reset has been completed, reconnect your iPhone to the 5ghz wifi band network.

Conclusion

The 5Hz wi fi band has been an exciting addition to the world of the internet. Luckily most iPhone models are compatible with this new band and work perfectly well with it. Keep in mind that the 5GHz frequency band is not free from disadvantages.

Читайте также:  Workcentre 6015 настройка wifi

This means that you must be careful in selecting it as the default network for your devices. If you want to experience fast data transfer speed on your iPhone, then the 5GHz wifi frequency band will be a perfect choice.

Patrick Dobbins

Patrick Dobbins is a technology writer with over eight years of experience in the online market. He specializes in exploring apple products and talks about the latest features for the MacOs, iPhone, and iPad. Although his main area of expertise lies in Mac and iOS, he doesn’t stray far from Windows. In addition to writing for RottenWifi, Patrick has also made editorial contributions to other forums, including Business 2 Community and Tweak Your Biz. Apart from his work, Patrick is a husband and a father of two who enjoys heavy metal. He also knows his way around a piano, but he’s not as good at it as he is at writing.

Blog.rottenwifi.com is a participant in the Amazon Services LLC Associates Program which means we may get paid commissions on editorially chosen products purchased through our links to retailer sites. All names, logos, brands, and images are trademarks or copyrighted materials of their respective owners. Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.

Источник

Режим модема на iPhone. Как переключаться между 2,4 ГГц и 5 ГГц?

Режим модема на iPhone. Как переключаться между 2,4 ГГц и 5 ГГц?

Все модели Айфонов умеют «раздавать» интернет, что очень удобно, если поблизости нет точки доступа Wi-Fi. Таким образом можно «сопрягать» телефон с ноутбуком или другим гаджетом, получая отличный сигнал. Но мало кто знает, что с версии iPhone 12 и выше, появилась поддержка сетей Wi-Fi на скорости 5 ГГц. Что это значит и как воспользоваться функцией, рассказываем в данном материале.

Разница между 2,4 ГГц и 5 ГГц

Итак, для начала разберемся, чем же отличаются эти две технологии. Вай-Фай уровня 2,4 ГГц существует уже давно, именно в таком диапазоне работает большинство компьютеров и других устройств. В то время как 5 ГГц появился относительно недавно, и производители девайсов только начали добавлять его поддержку. Часто, модемы, маршрутизаторы и другие устройства имеют возможность использовать сразу два диапазона, с выбором самого оптимального. Коротко о преимуществах и недостатках:

  • Диапазон Wi-Fi 2,4 ГГц более распространен, его поддерживает подавляющее количество устройств, что несомненно является плюсом. К ним же относится повышенная безопасность и дальность сигнала. К минусам можно отнести более низкую скорость передачи данных.
  • Диапазон Wi-Fi 5 ГГц — передовая технология, которая только получает распространение. Из преимуществ — более высокая передача данных. Минусы — работает на коротких расстояниях, поддерживает меньше совместимых устройств, не так безопасен, как предыдущая версия.

Как видим, если скорость интернета для вас не является доминирующим фактором, то лучше использовать более универсальный диапазон 2,4 ГГц. Тем не менее, начиная с новых моделей Apple iPhone , существует возможность включения и 5 ГГц.

Как включить Wi-Fi 5 ГГц на iPhone

Большинство «яблочных» решений реализованы весьма просто, не исключение и данная функция. Достаточно лишь передвинуть соответствующий ползунок в «Настройках»:

  • Открываем «Настройки» на Айфоне.
  • Переходим к пункту «Режим модема».
  • Ставим в неактивное положение переключатель «Максимальная совместимость».

Таким образом, мы отключаем диапазон по умолчанию 2,4 ГГц и активируем 5 ГГц. Соответственно, если нас что либо не устраивает, либо же окажется, что подключаемое устройство несовместимо — заново переводим ползунок в активное положение.

Источник

Оцените статью
Adblock
detector