Kali linux broadcom wifi drivers

Step-by-step – Broadcom WiFi Kali Driver 2020 Installation

GNU/Linux Kali 2020 Installing Broadcom Wi-Fi Driver Guide

You are Welcome! The Tutorial shows you Step-by-Step How to Install Broadcom Wi-Fi and Bluetooth Driver in Kali GNU/Linux 2020.

And Broadcom Wireless Cards on Kali Linux 2020 needs Proprietary Software (called “Firmware”) that Runs on the Wireless Chip itself to Work Properly.

Moreover, this Package contains Broadcom’s IEEE 802.11a/b/g/n Hybrid Linux Device Driver in use with Broadcom’s BCM43xx based Hardware.

The Broadcom Wl Kali Driver Supports the following Devices:

• BCM4311
• BCM4312
• BCM4313
• BCM4321
• BCM4322
• BCM43142
• BCM43224
• BCM43225
• BCM43227
• BCM43228
• BCM4331
• BCM4352
• BCM4360

And the Broadcom B43 Kali Driver Supports the following Devices:

But instead see the Broadcom Wl Driver for the Newer ones like:

• BCM4311
• BCM4312
• BCM4313
• BCM4321
• BCM4322
• BCM43142
• BCM43224
• BCM43225
• BCM43227
• BCM43228
• BCM4331
• BCM4352
• BCM4360

Finally, for the older Adapters see the Broadcom B43 Legacy Kali Firmware:

Источник

How to Install the BCM43142 WiFi Driver on Kali Linux

How to Install the Broadcom BCM43142 Driver on Kali Linux — In this article, I will explain the steps to install the Broadcom BCM43142 802.11b/g/n driver on Kali Linux. If you install Linux on a laptop that uses the BCM43142 chipset, the wifi driver will not automatically activate, which means you have to install the wifi driver manually so that the wifi on your laptop can be used.

From my experience using a laptop with a Broadcom BCM43142 chipset in several other Linux distributions such as Arch Linux, Manjaro, Debian and of course Kali Linux, this chipset does not yet support. Therefore I have to outsmart it so that the wifi chipset can function normally.

How to install the BCM43142 wifi driver on kali linux

To install the BCM43142 driver on Kali Linux, you must first update the repository and upgrade the package by typing the following command in the terminal.

Wait until it’s finished, when it’s finished installing linux-headers, now install the synaptic package manager because we will install the driver using synaptic.

Then run the Synaptic Package Manager by typing the synaptic command in the terminal, click on the Search menu, then in the Search column please type BCM43142.

From the search results, 3 options will appear as shown below, select broadcom-sta-dkms -> right click then select Mark for installation -> click the Apply button and wait for the installation process to complete. Then reboot your laptop.

• It does not support running mdk3 to disconnect other users on the network.
• It does not support monitor mode so we cannot capture handshakes when penetrating a WiFi network.
• Cannot run aircrack-ng software, which is a software used for wireless network penetration.

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

Automated Shell Script Install WiFi Driver ( Broadcom ) in Kali Linux 2022 Versions. Originally Made By SSTec Tutorials.

License

jaykali/BroadcomInstaller2022

This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Sign In Required

Please sign in to use Codespaces.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

Automated Shell Script Install WiFi Driver ( Broadcom ) in Kali Linux 2022.2 Made By SSTec Tutorials #Broadcom Wifi Driver (802.11n) Broadcom 802.11n Network Adapter is a software program developed by Broadcom.
The software is designed to connect to the Internet and adds a Windows Firewall exception in order to do so without being interfered with.

# Clone the repository git clone https://github.com/jaykali/BroadcomInstaller2022 # Enter into the directory cd BroadcomInstaller2022 # Make the scriipt executable chmod +x Broadcom.sh # Run the script bash maskphish.sh

About

Automated Shell Script Install WiFi Driver ( Broadcom ) in Kali Linux 2022 Versions. Originally Made By SSTec Tutorials.

Источник

torresashjian / linux-kali-install-wifi-drivers.sh

This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode characters

apt-get update

apt-get install linux-image- $( uname -r | sed ‘ s,[^-]*-[^-]*-,, ‘ ) linux-headers- $( uname -r | sed ‘ s,[^-]*-[^-]*-,, ‘ ) broadcom-sta-dkms

modprobe -r b44 b43 b43legacy ssb brcmsmac bcma

modprobe wl

Thank you . Finally its worked .

Thank you so much!! Problem solved!

modprobe: FATAL: Module wl not found in directory /lib/modules/4.9.0-kali3-amd64

i have a linux-headers-686-pae is already the newest version (3.16+63).
broadcom-sta-dkms is already the newest version (6.30.223.248-3).
linux-image-686-pae is already the newest version (4.9+79+kali2).
but at me launch «modprobe -r b44 b43 b43legacy ssb brcmsmac bcma
& modprobe wl»

i get notice «modprobe -r b44 b43 b43legacy ssb brcmsmac bcma
modprobe wl»

Whenever I run that line,
apt-get install linux-image-$(uname -r|sed ‘s,[^-]-[^-]-,,’) linux-headers-$(uname -r|sed ‘s,[^-]-[^-]-,,’) broadcom-sta-dkms
It gives me unable to locate broadcom-sta-dkms.
Where is the problem and what is solution??

apt update && apt dist-upgrade
apt install gdebi linux-headers-4.14.0-kali3-amd64
wget http://ftp.us.debian.org/debian/pool/non-free/b/broadcom-sta/broadcom-sta-dkms_6.30.223.271-7_all.deb
gdebi broadcom-sta-dkms_6.30.223.271-7_all.deb
modprobe wl
2018.1

before airmon-ng it turned out wlan0mon and now wlan0 and prism0 how to fix it?

I tried all the above and nothing works. Two days now I try and nothing.. Please help

Ya last one works for me on 2018.1 but previous versions are support 1st one,Thanks i try lot time to do update and restart again and again

Hello can you please help me, i have installed Kali linux 2018.1 on my USB with 16 GB sd card , so it is working but there is no installed Broadcom driver . now i have tried everything you write above but always get the same error : modprobe: ERROR: could not insert ‘wl’: Unknown symbol in module, or unknown parameter (see dmesg). please help

hello,
i have installed kali and even after updating it always shows this
Package linux-headers-4.14.0-kali3-amd64 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package ‘linux-headers-4.14.0-kali3-amd64’ has no installation candidate.
please help me to install headers and wlan available to me.

If you cant apt update try disabling you anti-virus.
I couldnt get it to update because my anti-virus on my real pc was blocking the website it needs to connect to on my VM.

Hey there, I am also facing the same problem with 2018.1 . I think installing with USB has something to do with this. Can you share your sources.list file with us here? I know there is one in the kali.org official site but I want to see one yours. I am also getting the no installation candidate error. Help plz.

guys facing the same issues since i m using kali linux. all the above mentioned solution didn’t work for me. using by vbox. please help for wifi driver install.

Worked brilliantly on my Kali.
Both my WiFi and Bluetooth are now working.

apt update && apt dist-upgrade
apt install gdebi linux-headers-4.14.0-kali3-amd64
wget http://ftp.us.debian.org/debian/pool/non-free/b/broadcom-sta/broadcom-sta-dkms_6.30.223.271-7_all.deb
gdebi broadcom-sta-dkms_6.30.223.271-7_all.deb
modprobe wl
2018.1

before airmon-ng it turned out wlan0mon and now wlan0 and prism0 how to fix it?

Is this what works now for the latest Kali version? Trying it out now.

I have found a way to download the packages on a different laptop and install them on the Kali Linux 2019 laptop to fix the WIFI driver issue for Broadcom BCM43142

Copy the Packages to the Kali Linux laptop and install them

sudo dpkg -i dkms_2.7.1-1_all.deb
sudo dpkg -i broadcom-sta-dkms_6.30.223.271-10_all.deb

I have wasted a lot of time on this and hope this helps someone solve their problems faster!

2019.4 worked thanks.
2020.1 cant worked.

took me 2 days to figure the problem and find you — your an absolute legend thanks man

It worked on 2020.2 Kali Linux using Broadcom (BCM43142) wifi card.
The commands I used is the upper one. Thank you for this command!

apt-get update
apt-get install linux-image-$(uname -r|sed ‘s,[^-]*-[^-]*-,,’) linux-headers-$(uname -r|sed ‘s,[^-]*-[^-]*-,,’) broadcom-sta-dkms
modprobe -r b44 b43 b43legacy ssb brcmsmac bcma
modprobe wl

If it get this error when typing «modprob wl».

modprobe: FATAL: Module wl not found in directory /lib/modules/n.n.n-kalin-amd64

Then, for my laptop, it just need to reboot PC and it successfully installed on the PC.
Problem solved!

For Debian Buster, it also works as well. Thank you for these commands!

It worked on 2020.2 Kali Linux using Broadcom (BCM43142) wifi card.
The commands I used is the upper one. Thank you for this command!

apt-get update
apt-get install linux-image-$(uname -r|sed ‘s,[^-]*-[^-]*-,,’) linux-headers-$(uname -r|sed ‘s,[^-]*-[^-]*-,,’) broadcom-sta-dkms
modprobe -r b44 b43 b43legacy ssb brcmsmac bcma
modprobe wl

If it get this error when typing «modprob wl».

modprobe: FATAL: Module wl not found in directory /lib/modules/n.n.n-kalin-amd64

Then, for my laptop, it just need to reboot PC and it successfully installed on the PC.
Problem solved!

Источник

Step-by-step – Broadcom WiFi Kali Driver 2023 Installation

GNU/Linux Kali 2023 Installing Broadcom Wi-Fi Driver Guide

You are Welcome! The Tutorial shows you Step-by-Step How to Install Broadcom Wi-Fi and Bluetooth Driver in Kali GNU/Linux 2023.

And Broadcom Wireless Cards on Kali Linux 2023 needs Proprietary Software (called “Firmware”) that Runs on the Wireless Chip itself to Work Properly.

Moreover, this Package contains Broadcom’s IEEE 802.11a/b/g/n Hybrid Linux Device Driver in use with Broadcom’s BCM43xx based Hardware.

The Broadcom Wl Kali Driver Supports the following Devices:

• BCM4311
• BCM4312
• BCM4313
• BCM4321
• BCM4322
• BCM43142
• BCM43224
• BCM43225
• BCM43227
• BCM43228
• BCM4331
• BCM4352
• BCM4360

And the Broadcom B43 Kali Driver Supports the following Devices:

But instead see the Broadcom Wl Driver for the Newer ones like:

• BCM4311
• BCM4312
• BCM4313
• BCM4321
• BCM4322
• BCM43142
• BCM43224
• BCM43225
• BCM43227
• BCM43228
• BCM4331
• BCM4352
• BCM4360

Finally, for the older Adapters see the Broadcom B43 Legacy Kali Firmware:

Источник