Kali linux запустить network manager

Kali Linux Network Manager Is Not Running: How to Fix It

If you are a Kali Linux user and have ever encountered the error message “Network Manager is not running” when attempting to connect to a network, then you know how frustrating this issue can be. In this article, we will discuss what causes this error and how to fix it.

Understanding the Issue

The Network Manager is a program that manages network connections on a Linux system. It is responsible for detecting and configuring network interfaces, managing wireless networks, and connecting to the internet. When the Network Manager is not running, you cannot connect to any networks, wired or wireless.

Common Causes of the Problem

Several factors can cause the Network Manager to stop running. Some of the most common causes include:

1. Outdated Network Manager: If you are using an older version of Kali Linux, it may have an outdated Network Manager that is no longer supported.
2. Conflicting Network Services: If there are other network services running on your system, such as dhclient or wpa_supplicant, they may conflict with the Network Manager.
3. Corrupted Packages: Sometimes, packages that are required for the Network Manager to function properly can become corrupted, leading to the error message.

How to Fix the Issue?

Now that you know what causes the problem, let’s look at how to fix it.

Method 1: Restart the Network Manager Service

The first thing you should try is to restart the Network Manager service. To do this, open a terminal and type the following command:

sudo systemctl restart NetworkManager.service

This command will restart the Network Manager service and should fix the issue if it was caused by a temporary glitch.

Method 2: Check for Conflicting Services

If restarting the Network Manager service did not work, you should check if there are any conflicting network services running on your system. To do this, open a terminal and type the following command:

sudo systemctl list-units --type=service | grep network

This command will show you a list of network-related services running on your system. If you see any services other than “NetworkManager.service,” you should stop them by typing the following command:

Replace with the name of the service, you want to stop. Once you have stopped all conflicting services, restart the Network Manager service using the command from Method 1.

Method 3: Reinstall the Network Manager

If neither of the above methods works, you may need to reinstall the Network Manager. To do this, open a terminal and type the following command:

sudo apt-get install --reinstall network-manager

This command will reinstall the Network Manager and any packages that it depends on.

Conclusion

In this article, we have discussed the “Network Manager is not running” error on Kali Linux and how to fix it. By following the methods outlined above, you should be able to resolve the issue and connect to your desired network. Remember to always keep your system up-to-date and to use caution when modifying system files.

Источник

How To Install NetworkManager on Kali Linux

In this guide, we’ll discuss How To Install NetworkManager on Kali Linux. Also, we will demonstrate how to uninstall and update NetworkManager .

One-liner install command

For those in a hurry, here’s a one-line installation command:

sudo apt-get update && sudo apt -y install network-manager

But if you are interested in the detailed steps with descriptions, the following information is for you.

What is NetworkManager and what are the ways to install it?

Short description: network management framework (daemon and userspace tools)

Before beginning this tutorial, you will need access to a server or computer running Kali Linux. This guide was written specifically with a server running Kali Linux in mind, although it should also work on older, supported versions of the operating system.

Also, make sure you are running a regular, non-root user with sudo privileges configured on your server. When you have an account available, log in as your non-root user to begin.

There are several ways to install NetworkManager on Kali Linux. You can use (links are clickable):

In the following sections, we will describe each method in detail. You can choose one of them or refer to the recommended one.

Install NetworkManager using apt-get

First, update apt database with apt-get using the following command.

After updating apt-get database, You can install NetworkManager using apt by running the following command:

sudo apt -y install network-manager

Install NetworkManager using apt

Because NetworkManager is available in Kali Linux’s default repositories, it is possible to install it from these repositories using the apt packaging system.

To begin, update apt database with apt using the following command.

After updating apt database, You can install NetworkManager using apt by running the following command:

sudo apt -y install network-manager

Install NetworkManager using aptitude

If you want to follow this method, you might need to install aptitude first since aptitude is usually not installed by default on Kali Linux. Update apt database with aptitude using the following command.

After updating aptitude database, You can install NetworkManager by running the following command:

sudo aptitude -y install network-manager

How to upgrade (update) a single package NetworkManager using apt-get?

First, you will need to update packages index. Run update command as usual:

Next, to upgrade only the NetworkManager, e.g. single package, you should use the following format with the apt-get command/apt command:

sudo apt-get --only-upgrade install network-manager

Note that this command will not install any new packages! If you wish to install the package if it doesn’t exist you may leave out —only-upgrade part.

It’s Good to Know:

sudo apt-get install network-manager

This will upgrade the package even if is already installed.

How To Uninstall NetworkManager from Kali Linux

To uninstall only the NetworkManager package you can execute the following command:

sudo apt-get remove network-manager

Uninstall NetworkManager and all its dependencies

To uninstall NetworkManager and its dependencies that are no longer needed by Kali Linux, you can use the command below:

sudo apt-get -y autoremove network-manager

Remove NetworkManager with all configurations and data

To remove NetworkManager configuration and data from your system you can run the following purge command:

sudo apt-get -y purge network-manager

Remove NetworkManager completely (configurations, data and all of its dependencies)

And lastly, you can run the next command to remove absolutely everything related to NetworkManager package, e.g.: configurations, data and all of its dependencies. Just use this command:

sudo apt-get -y autoremove --purge network-manager

Extra info and code examples

NetworkManager is a system network service that manages your network devices and connections, attempting to keep active network connectivity when available. It manages ethernet, WiFi, mobile broadband (WWAN), and PPPoE devices, and provides VPN integration with a variety of different VPN services. This package provides the userspace daemons and a command line interface to interact with NetworkManager. Optional dependencies: * ppp: Required for establishing dial-up connections (e.g. via GSM). * dnsmasq-base/iptables: Required for creating Ad-hoc connections and connection sharing. * avahi-autoipd: Used for IPv4LL, a protocol for automatic Link-Local IP address configuration. * libteam-utils: Network Team driver allows multiple network interfaces to be teamed together and act like a single one. This process is called «ethernet bonding», «channel teaming» or «link aggregation».

• Maintainer: Utopia Maintenance Team
• Sources url:https://wiki.gnome.org/Projects/NetworkManager
• Section/Category:net

Conclusion

You now have a full guide on how to install NetworkManager using apt, apt-get and aptitude tools. Also, we showed how to update as a single package and different ways to uninstall the NetworkManager from Kali Linux.

Источник

Missing network manager in Kali Linux? [duplicate]

I’m having some serious issues with the network manager in Kali. I have read 25+ other threads / questions with this problem to no avail. Here is what is happening. Essentially the icon is missing from the top and there seems to be no way to open it. On a Kali Linux live USB (latest stable version of OS) plugged into a Macbook Air, the network manager icon is missing in the corner. Many threads suggest that you «right click and add to panel» to get it back, but I can’t right click this— right-clicking the upper right notifications area does the same thing as left-clicking. There is no option to add anything. I have tried running NetworkManager at the terminal, and it recognizes the command but does nothing. I have also tried running /etc/init.d/network-manager start after stopping it, and it tells me it is starting it but nothing appears on the screen and nothing changes. When I go to Settings, the only related area is «Network» which brings up a little window with some proxy options and nothing else. This doesn’t seem to be the Network Manager, which is also not listed under Applications. What is going on here? I don’t know what to try next. I have no internet access so I can’t download anything. Edit: Here is the output of iwconfig :

lo no wireless extensions 

lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0.10 loop txqueulen - (Local Loopback) RX packets 16 bytes 960 (960.0B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 16 bytes 960 (960.0B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 

bash: ipconfig: command not found 

03:00.0 Network controller: Broadcom Corporation BCM4360 802.11ac Wireless Network Adapter (rev 03) 

Also, service network-manager restart has no output at all. And running nm-applet causes a notification to pop up that reads «Disconnected: The network connection has been disconnected.» There is no other result.

Источник

How To Install network-manager on Kali Linux

In this tutorial we learn how to install network-manager on Kali Linux.

What is network-manager

NetworkManager is a system network service that manages your network devices and connections, attempting to keep active network connectivity when available. It manages ethernet, Wi-Fi, mobile broadband (WWAN), and PPPoE devices, and provides VPN integration with a variety of different VPN services.

This package provides the userspace daemons and a command line interface to interact with NetworkManager.

• ppp: Required for establishing dial-up connections (e.g. via GSM).
• dnsmasq-base/iptables: Required for creating Ad-hoc connections and connection sharing.
• libteam-utils: Network Team driver allows multiple network interfaces to be teamed together and act like a single one. This process is called “ethernet bonding”, “channel teaming” or “link aggregation”.

There are three ways to install network-manager on Kali Linux . We can use apt-get , apt and aptitude . In the following sections we will describe each method. You can choose one of them.

Install network-manager Using apt-get

Update apt database with apt-get using the following command.

After updating apt database, We can install network-manager using apt-get by running the following command:

sudo apt-get -y install network-manager 

Install network-manager Using apt

Update apt database with apt using the following command.

After updating apt database, We can install network-manager using apt by running the following command:

sudo apt -y install network-manager 

Install network-manager Using aptitude

If you want to follow this method, you might need to install aptitude first since aptitude is usually not installed by default on Kali Linux. Update apt database with aptitude using the following command.

After updating apt database, We can install network-manager using aptitude by running the following command:

sudo aptitude -y install network-manager 

How To Uninstall network-manager on Kali Linux

To uninstall only the network-manager package we can use the following command:

sudo apt-get remove network-manager 

Uninstall network-manager And Its Dependencies

To uninstall network-manager and its dependencies that are no longer needed by Kali Linux, we can use the command below:

sudo apt-get -y autoremove network-manager 

Remove network-manager Configurations and Data

To remove network-manager configuration and data from Kali Linux we can use the following command:

sudo apt-get -y purge network-manager 

Remove network-manager configuration, data, and all of its dependencies

We can use the following command to remove network-manager configurations, data and all of its dependencies, we can use the following command:

sudo apt-get -y autoremove --purge network-manager 

References

Summary

In this tutorial we learn how to install network-manager using different package management tools like apt, apt-get and aptitude.

Источник