Линукс посмотреть запущенные службы

Listing Linux Services With Systemctl

A variety of services run continuously on a Linux background, such as network and system services. Services running on Linux are also known as daemons, which refers to a group of processes working on the back-end.

Services can be managed and listed through different methods and tools. The Systemd is a software suite of tools with the ability to manage Linux systems adopted by Linux distribution as a drop-in replacement of the init process.

All system tasks can be controlled through Systemd. The process can be started or ended using this tool, and all enabled and disabled services information can also be listed with Systemd.

List Services Using Systemctl in Linux

Systemctl is a utility with the responsibility to manage and control the systemd system. The systemctl command can be used to list all services in Linux.

We will now show you how systemctl works.

List All Services

To get a list of all the services on the system, whether they are loaded or inactive, issue the following systemctl command in the terminal:

All services in your system will appear on the screen, as you can see in the output shown in the image above.

List Loaded Services

The following command will list every loaded service that is running, active, or failed:

Running Services

In many cases, it can be difficult to distinguish the running services from all the other services. Run the following command to obtain a quick response that shows the loaded and running services in the system:

Enabled Services

Enter the following command to check the enabled services in the system:

Disabled Services

Disabled services will not start up or activate automatically. To enable a desired/required service, select the service from the disabled category. The following command is used to obtain a list of the disabled services in the system:

Check Service Status

The “cup” command is used to obtain more information about the status of a service. Cup is a modular printing system through which the computer acts as a print server and displays information. Use the cups command to obtain more information about the enabled/disabled services in the system:

Where are systemctl service files

Systemd configuration files are stored in specific directories. There are System unit directories and User unit directories.

You can find the location of the System Unit and User Unit directories using the pkg-config systemd command.

Run the following commands to find the directories on your system:

$ pkg-config systemd —variable =systemdsystemunitdir

$ pkg-config systemd —variable =systemduserunitdir

You can browse to these directories and see the systemd unit files.

Conclusion

This article showed you how to use systemctl commands to list services in Linux, including multiple options for viewing the services. With the correct knowledge, it is easy to pick the required command.

About the author

Syeda Wardah Batool

I am a Software Engineer Graduate and Self Motivated Linux writer. I also love to read latest Linux books. Moreover, in my free time, i love to read books on Personal development.

Источник

10+ commands to list all systemctl services with status

In this tutorial I will share the commands which you can use to list systemctl services along with their state. You can use these methods in scripts to add service status checks to make sure service is in running or failed state.

Are you new to systemd and systemctl?

With RHEL/CentOS 7, now we have services based on systemd and the SysV scripts are deprecated. If you are new to systemd then I would suggest reading this another article where I have done 1:1 comparison between SysV and systemd services.

Now with systemd the traditional Linux commands such as chckconfig , service etc are not supported any more. Although you can still use these commands but they can be removed in upcoming releases.

For example, with RHEL/CentOS 6 we used to use chkconfig to enable or disable service at different run level. Now with RHEL 8 also I see we are allowed to use chkconfig

# chkconfig postfix on Note: Forwarding request to 'systemctl enable postfix.service'. Created symlink /etc/systemd/system/multi-user.target.wants/postfix.service → /usr/lib/systemd/system/postfix.service.

But the request is internally routed to systemctl . Similarly you can restart a service using traditional command i.e. service . For example, to restart sshd :

# service sshd restart Redirecting to /bin/systemctl restart sshd.service

This request was also transferred to systemctl .

So I hope you understood the point, at the time of writing this article with RHEL 8.1

# cat /etc/redhat-release Red Hat Enterprise Linux release 8.1 (Ootpa)

we are still allowed to use traditional SysV commands but it can be removed in any release now. So I would strongly recommend users to start using systemctl commands as they are very user friendly and powerful tool with the amount of options they support.

With systemd we have unit files which are further classified into service , socket , target etc. So you must be very clear on your requirement if you wish to list only services, or sockets or any other type of unit.

systemctl list unit files loaded in memory

List active unit files

First of all we will list all the unit files which are currently available in the memory of our Linux server. This command will list only the active units from the server’s memory:

List all the unit files

To list all the units independent of their state add » —all » to this command

As you can see now it is loading all the unit files including failed , inactive unit files

systemctl list installed unit files

Now list-units shows the list of units which are currently loaded in the memory but not necessarily installed on the server. To view the list of unit files which are currently installed on our server we use:

Here this command will show all the installed unit files independent of their state unlike list-units which shows only the active unit files. Adding —all with this command will have no advantage.

List type of unit files

There can be different types of unit files such as service, socket, mount etc. To further filter the unit files we can add type= argument with list-unit-files . The argument should be a comma-separated list of unit types.

systemctl list services

To list all the installed systemctl services from our Linux server:

# systemctl list-unit-files --type=service

This should give us a complete list of installed services (independent of it’s state)

systemctl list mount files

With systemd all the partitions and file system are mounted as part of mount type unit files. So we can also list all the mount type unit files available on our server using type=mount

# systemctl list-units --all --type=mount

We can further use this with different other type of unit files such as socket, target etc.

List state of services

To check if a service is enabled/disabled/static/indirect, you must use list-unit-files with systemctl while to check if a service is running/active/failed/dead etc then you must use systemctl list-units . To get complete list of supported options with list-units and —state , use systemctl —state=help

systemctl list enabled services

To list all the service unit files which are currently in enabled state use —state=enabled

# systemctl list-unit-files --type=service --state=enabled

systemctl list disabled services

We can provided multiple state type with —state= argument where individual state values will be comma separated. For example to list all the systemctl service which are either enabled or disabled

# systemctl list-unit-files --type=service --state=enabled,disabled

systemctl list running services

To list the running services we will use list-units in combination with —type=service and —state=running

# systemctl list-units --type=service --state=running

systemctl list failed services

To list failed services you can use —state=failed

# systemctl list-units --type=service --state=failed

OR alternatively we can directly use

Check service status of individual unit file

Now the above commands will give you the status of all the unit files which are installed or available on your server. To check the status of individual file we do not want to use those commands in combination with grep and other filter utility.

Now assuming I wish to check the status of sshd service. So I can use

which can give me a long list of output along with the actual status such as active, running loaded. Now these three states can also be grepped individually using the properties of a unit file

To check if a systemctl service is running or not use:

# systemctl show sshd --property=SubState SubState=running

To check if a service is active or inactive :

# systemctl show sshd --property=ActiveState ActiveState=active

# systemctl is-active sshd active

To check if a service is loaded or not:

# systemctl show sshd --property=LoadState LoadState=loaded

So we can individually grep the state of individual services using their properties. To list all the properties of a service you can use:

Conclusion

In this article we learned little bit more about systemd and systemctl unit files. I have explained about the different types of unit files and commands using which we can get the list of running services, sockets, targets etc with systemctl . We can also get individual status of services using the property of unit files which gives us much more control over the details of each service. We can use these properties in scripts for automation purpose.

Lastly I hope the steps from the article to list running services on Linux was helpful. So, let me know your suggestions and feedback using the comment section.

References

I have used below external references for this tutorial guide

Didn’t find what you were looking for? Perform a quick search across GoLinuxCloud

If my articles on GoLinuxCloud has helped you, kindly consider buying me a coffee as a token of appreciation.

For any other feedbacks or questions you can either use the comments section or contact me form.

Thank You for your support!!

Источник