Linux amlogic usb burning tool

Linux Mint Forums

Forum rules
There are no such things as «stupid» questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read how to get help. Topics in this forum are automatically closed 6 months after creation.

Re: Wine and Amlogic’s USB Burning Tool

Post by Hoser Rob » Sun Jul 16, 2017 8:29 am

I just did what I usually suggest for these things, searched «linux wine Amlogic USB Burning Tool»:. Got exactly 4 hits, one of which was this thrtead, none of which linked to the WIne app database. Which is what you’re looking for with Wine.

Why don’t you try the WIne forums? I don’t think you’ll get many answers here.

pbear Level 16
Posts: 6540 Joined: Wed Jun 21, 2017 12:25 pm Location: San Francisco

Re: Wine and Amlogic’s USB Burning Tool

Post by pbear » Mon Jul 17, 2017 1:45 pm

Well, Wine is supported in the sense it’s in the repo, but it’s not part of the default installation.

I’m in the process of learning Wine, have registered at WineHQ and so was able to run a search. The only thing which came up was an old forum thread, at which point (2011) it didn’t work. More discouraging, perhaps, it that there’s not a single user report in the database.

Seems to me you’ll do better trying to solve the problem natively. For example, I notice Amlogic has a Linux page. Or a workaround as described here.

Hope that helps. Good luck.

• Important Notices
• ↳ Rules & Notices
• ↳ Releases & Announcements
• ↳ Main Edition Support
• ↳ Beginner Questions
• ↳ Installation & Boot
• ↳ Software & Applications
• ↳ Hardware Support
• ↳ Graphics Cards & Monitors
• ↳ Printers & Scanners
• ↳ Storage
• ↳ Sound
• ↳ Networking
• ↳ Virtual Machines
• ↳ Desktop & Window Managers
• ↳ Cinnamon
• ↳ MATE
• ↳ Xfce
• ↳ Other topics
• ↳ Non-technical Questions
• ↳ Tutorials
• Debian Edition Support
• ↳ LMDE Forums
• ↳ Beginner Questions
• ↳ Installation & Boot
• ↳ Software & Applications
• ↳ Hardware Support
• ↳ Networking
• ↳ Tutorials
• ↳ Other Topics & Open Discussion
• ↳ LMDE Archive
• Interests
• ↳ Gaming
• ↳ Scripts & Bash
• ↳ Programming & Development
• Customization
• ↳ Themes, Icons & Wallpaper
• ↳ Compiz, Conky, Docks & Widgets
• ↳ Screenshots
• ↳ Your Artwork
• Chat
• ↳ Introduce Yourself
• ↳ Chat about Linux Mint
• ↳ Chat about Linux
• ↳ Open Chat
• ↳ Suggestions & Feedback
• International
• ↳ Translations
• ↳ Deutsch — German
• ↳ Español — Spanish
• ↳ Français — French
• ↳ Italiano — Italian
• ↳ Nederlands — Dutch
• ↳ Português — Portuguese
• ↳ Русский — Russian
• ↳ Suomi — Finnish
• ↳ Other Languages
• ↳ Čeština-Slovenčina — Czech-Slovak
• ↳ Magyar — Hungarian
• ↳ 日本語 — Japanese
• ↳ Polski — Polish
• ↳ Svenska — Swedish
• ↳ Українська — Ukrainian

Powered by phpBB® Forum Software © phpBB Limited

Источник

Amlogic Burning Tool

Утилита для прошивки контроллеров на базе процессоров Amlogic.

Утилита работает только на ОС Windows.

Для Linux вы можете использовать Khadas Utils .

Подготовка

Для корректного определения контроллера в процессе прошивки по USB, вам необходимо установить драйвер CP210x USB to UART Bridge.

Скачайте и установите Amlogic Burning Tool для вашего устройства.

Подключение устройства

Для прошивки устройство должно быть подключено кабелем USB к ПК.

Питание контроллера во время прошивки осуществляется также по этому кабелю USB и подключать основной источник питания не обязательно.

• Некоторые устройства имеют более одного порта USB.
• Посмотрите в документации к вашему устройству, чтобы узнать через какой порт USB устройство подключается для прошивки.

Включение и загрузка устройства

Для прошивки устройство должно быть загружено в режиме загрузчика (update mode). Это можно сделать несколькими способами:

• Как правило устройство имеет кнопку переключения режима загрузки. Доступ к кнопке может осуществляется через отверстие в корпусе. При включении устройства или его перезагрузке необходимо удерживать эту кнопку нажатой 1-2 секунды с момента подключения USB кабеля (питания).
• О наличии других способов переключения в режим загрузчика (см. документацию к вашему устройству ).

После того как устройство будет успешно подключено к ПК и идентифицировано в программе Burning Tool в главном окне программы будет выведена надпись: Connect success:

Выбор образа ПО для прошивки

Актуальный образ прошивки для вашего устройства вы можете найти тут: JetHome firmware portal.

Открыть меню File → Import image и выбрать на диске образ для прошивки. Будет произведена проверка образа, это может занять продолжительное время:

Если никаких ошибок в процессе проверки обнаружено не будет, то по окончанию проверки программа никаких сообщений не выводит.

Прошивка образа

Для начала прошивки образа необходимо нажать кнопку Start в правом верхнем углу главного окна программы. Начнется процесс прошивки.

Если при прошивке образа возникают ошибки, то необходимо перед началом процесса прошивки отключить галочки Erase flash и Erase bootloader.

При возникновении какой-либо ошибки процесс прерывается и в нижней части окна программы будут выведены сообщения с описанием ошибки:

По завершению процесса прошивки будет выведено сообщение: Burning successfull:

После чего можно нажать на кнопку Stop, запретив автоматический запуск процедуры прошивки при новом подключении устройства к ПК.

© Copyright 2023, JetHome. Обновлено: 26.04.2023 09:26:23 UTC.

Источник

Amlogic USB Burning Tool

For Android Set Top TV Boxes requiring a Firmware Upgrade, a tool called Amlogic USB Burning Tool can be used to manualy download (flash) the Firmware Image to the Device when OTA updates are no longer available.

The Amlogic USB Burning Tool can also replace damaged firmware or repair a corrupted boot loader.

This tool is exclusively for devices. It is used to upgrade and/or restore Vendor firmware and as an alternative to Amlogic Bootcard Maker. The tool only runs under Microsoft Windows.

Requirements

Installation

Accept the defaults at the next few screens.

Eventually, the installer will ask to install required Device Drivers:

Allow the drivers to be installed.

NOTE: If the drivers are already installed and of the same version, the installer will exit.

Flashing Firmware

The firmware upgrade process should start

Once the firmware upgrade has completed:

Troubleshooting

The device might only accept upgrades over one specific USB port, frequently this is the port closest to the DC power inlet. Try each USB port.

The device might require to be connected by USB Patch Cable prior to starting USB Burning Tool. This is frequently true for older devices.

The device might require to have DC Power Supply and USB Patch Cable inserted simultaneously for the tool to work.

The device might need to be placed in recovery mode prior to connecting the USB Patch Cable:

NOTE: Some devices have the reset button hidden inside the AV slot and a paperclip or toothpick is required.

Change Language

USB Patch Cable

Depending the Device Board, the USB Patch Cable can be one of the following types:

TYPE	GENDER	TYPE	GENDER
USB A	Male	⇔	USB A	Male
USB A	Male	⇔	USB C	Male
USB A	Male	⇔	USB 2.0 Micro B	Male

Video Tutorial

Support

Team CoreELEC provides no support for 3rd party applications.

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

Linux version of Amlogic USB Burn Tool

Stane1983/aml-linux-usb-burn

This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Sign In Required

Please sign in to use Codespaces.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

Linux version of Amlogic USB Burning Tool

This is just «copy» of files that can be found on Amlogic Openlinux website.

Create new u-dev rule for Amlogic devices (in /etc/udev/rules.d). My file is called 70-persistent-usb-amlogic.rules Content of file is:

SUBSYSTEM=="usb", ENV=="usb_device", ATTR=="1b8e", ATTR=="c003", MODE:="0666", SYMLINK+="worldcup" 

When you created your rule either reload udev rules or reboot your machine. Make sure that root folder of this repository is in your PATH variable (I simply put it inside my ~/bin folder) so I can call it from anywhere without specifying path.

And this tool depends on libusb and libusb-compat , you must install those tools first.

Connect your device and put it to USB burning mode, open terminal and navigate to folder where your aml_upgrade_package.img is and issue command:

aml-flash --img=aml_upgrade_package.img --soc=gxl --wipe --reset=n --parts=all 

For more options, just issue aml-flash command. soc paremeter can be gxl (S905, S905X and S912), axg (A113 audio SoC), txlx (TV SoC — T962), m8 (S802, S805 and S812) I tested this tool with sucess on S812, S905, S905X and S912.

This tool is for x64 Linux only. File aml_image_v2_packer is 32bit but update binary (inside tools folder) is 64bit so.

About

Linux version of Amlogic USB Burn Tool

Источник

How to use Amlogic USB Burning Tool

These are instructions on how to use Amlogic USB Burning Tool to flash or install the Stock Firmware on Mobile devices powered by Amlogic Chipset.

Caution: Flashing or installing Firmware using the Amlogic Flash Tool will wipe the data from the device. Therefore, we recommend you take a backup of your data before using the tool.

Install .img Firmware using Amlogic USB Burning Tool

1. Download and install the Amlogic USB Driver on your computer (if in case Amlogic Drivers are already installed on the computer, then SKIP this step).

Notes

[*] Compatibility: It is compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10 (x32 or x64 bit).

[*] Amlogic Burning Tool: If you want to download the latest version of Amlogic Burning Tool, then head over to Download Amlogic Burning Tool page.

[*] Amlogic USB Driver: If you are looking for the Original Amlogic USB Driver, then head over to the Download Amlogic USB Driver page.

[*] Credits: Amlogic Burning Tool is created and distributed by Amlogic, Inc. So, full credit goes to them for sharing the Application for free.

Источник